Use the following procedure when the Client/MediaAgent can reach the CommServe.
1.
Select the Configure Firewall Services option.
Select This machine can open connection to CommServe on tunnel port
and click Next to continue.
2.
Enter the fully qualified name or the IP address of the
CommServe in the CommServe Host Name. This should be TCP/IP network
name. e.g., computer.company.com.
The CommServe client name is the name of the computer.
Click Next to continue.
The name of the CommServe client is case sensitive. Ensure to
specify the name with the correct letter case.
3.
Enter the following:
The local (NetBIOS) name of the client computer.
The TCP/IP IP host name of the NIC that the client computer must
use to communicate with the CommServe Server.
Click Next to continue.
The default network interface name of the client computer
is displayed if the computer has only one network interface.
If the computer has multiple network interfaces, enter the interface
name that is preferred for communication with the CommServe
Server.
Do not use spaces when specifying a new name for the Client.
4.
Specify incoming port number in CommServe HTTP/HTTPS
tunnel port number through which the CommServe receives tunnel connection.
Click Next to continue.
5.
If this computer is separated from the CommServe by a HTTP Proxy,
provide the following information:
HTTP Proxy hostname or IP address:
Specify hostname or IP address of the HTTP Proxy through which the CommServe
can be reached.
HTTP Proxy port number: Specify the port number of the HTTP Proxy
through which the CommServe can be reached.
Click Next to continue.
If this computer is not separated from the CommServe by a HTTP Proxy,
accept the default values and click Next to continue.
6.
Specify the port numbers to be used by the Bull Calypso
Communications Service (CVD) and Bull Calypso
Client Event Manager (EvMgrc)
Services.
Click
Next to continue.
Valid range for the port number is between 1024 and 65000.
Ensure that the port numbers specified here are within the
valid range and are not used by any other services.
7.
If the CommCell is in the Lockdown mode, specify the path
to the folder in which the CommCell HTTPS certificates are available.
Use the following procedure when the CommServe can reach the Client/MediaAgent.
1.
Select the Configure Firewall Services option.
Select CommServe can open connection toward this machine and click
Next to continue.
2.
Enter the name of the computer in CommServe client name
field.
Click Next to continue.
The name of the CommServe client is case sensitive. Ensure to
specify the name with the correct letter case.
3.
Enter the following:
The local (NetBIOS) name of the client computer.
The TCP/IP IP host name of the NIC that the client computer must
use to communicate with the CommServe Server.
Click Next to continue.
The default network interface name of the client computer
is displayed if the computer has only one network interface.
If the computer has multiple network interfaces, enter the interface
name that is preferred for communication with the CommServe
Server.
Do not use spaces when specifying a new name for the Client.
4.
Specify a local port number through which the Client/MediaAgent
will receive communication from the CommServe.
Click Next to continue.
5.
Specify the port numbers to be used by the Bull Calypso
Communications Service (CVD) and Bull Calypso
Client Event Manager (EvMgrc)
Services.
Click
Next to continue.
Valid range for the port number is between 1024 and 65000.
Ensure that the port numbers specified here are within the
valid range and are not used by any other services.
6.
If the CommCell is in the Lockdown mode, specify the path to the folder
in which the CommCell HTTPS certificates are available.
Use the following procedure when the Client/MediaAgent and CommServe can
reach each other.
1.
Select the Configure Firewall Services option.
Select This machine can open connection to CommServe on tunnel port
and click Next to continue.
2.
Enter the fully qualified name or the IP address of the
CommServe in the CommServe Host Name. This should be TCP/IP network
name. e.g., computer.company.com.
The CommServe client name is the name of the computer.
Click Next to continue.
The name of the CommServe client is case sensitive. Ensure to
specify the name with the correct letter case.
3.
Enter the following:
The local (NetBIOS) name of the client computer.
The TCP/IP IP host name of the NIC that the client computer must
use to communicate with the CommServe Server.
Click Next to continue.
The default network interface name of the client computer
is displayed if the computer has only one network interface.
If the computer has multiple network interfaces, enter the interface
name that is preferred for communication with the CommServe
Server.
Do not use spaces when specifying a new name for the Client.
4.
Specify incoming port number in CommServe HTTP/HTTPS
tunnel port number through which the CommServe receives tunnel connection.
Click Next to continue.
5.
If this computer is separated from the CommServe by a HTTP Proxy,
provide the following information:
HTTP Proxy hostname or IP address:
Specify hostname or IP address of the HTTP Proxy through which the CommServe
can be reached.
HTTP Proxy port number: Specify the port number of the HTTP Proxy
through which the CommServe can be reached.
Click Next to continue.
If this computer is not separated from the CommServe by a HTTP Proxy,
accept the default values and click Next to continue.
6.
Specify the port numbers to be used by the Bull Calypso
Communications Service (CVD) and Bull Calypso
Client Event Manager (EvMgrc)
Services.
Click
Next to continue.
Valid range for the port number is between 1024 and 65000.
Ensure that the port numbers specified here are within the
valid range and are not used by any other services.
7.
If the CommCell is in the Lockdown mode, specify the path
to the folder in which the CommCell HTTPS certificates are available.
Before configuring firewall options, ensure to configure the
port-forwarding gateway and to setup connection to the CommServe as described in
the Operating Through a Port-Forwarding Gateway procedure.
Use the following procedure when the Client/MediaAgent connects to the CommServe
through a port forwarding gateway.
1.
Select the Configure firewall services option.
Select This machine can open connection to CommServe on tunnel port
and click Next to continue.
2.
If CommServe is located in behind a port-forwarding gateway,
provide the following:
Provide the name of the CommServe computer in the CommServe Client
Name field. This is a display name to identify the CommServe in
the CommCell Console.
Provide the hostname of the port-forwarding gateway in
CommServe Host Name field. e.g., gateway.gatewayservices.com.
Click Next to continue.
The name of the CommServe client is case sensitive. Ensure to
specify the name with the correct letter case.
3.
Enter the following:
The local (NetBIOS) name of the client computer.
The TCP/IP IP host name of the NIC that the client computer must
use to communicate with the CommServe Server.
NOTES
The default network interface name of the client computer is displayed
if the computer has only one network interface. If the computer has
multiple network interfaces, enter the interface name that is preferred
for communication with the CommServe Server.
Do not use spaces when specifying a new name for the Client.
Click Next to continue.
4.
In the CommServe HTTP/HTTPS tunnel port number field,
provide the incoming port number on the port-forwarding gateway through
which the CommServe computer can be reached.
Click Next to continue.
5.
If this computer is separated from the CommServe by a HTTP Proxy,
provide the following information:
HTTP Proxy hostname or IP address:
Specify hostname or IP address of the HTTP Proxy through which the CommServe
can be reached.
HTTP Proxy port number: Specify the port number of the HTTP Proxy
through which the CommServe can be reached.
Click Next to continue.
If this computer is not separated from the CommServe by a HTTP Proxy,
accept the default values and click Next to continue.
6.
Specify the port numbers to be used by the Bull Calypso
Communications Service (CVD) and Bull Calypso
Client Event Manager (EvMgrc)
Services.
Click
Next to continue.
Valid range for the port number is between 1024 and 65000.
Ensure that the port numbers specified here are within the
valid range and are not used by any other services.
7.
If the CommCell is in the Lockdown mode, specify the path
to the folder in which the CommCell HTTPS certificates are available.
Use the following procedure when the client/MediaAgent connects to the CommServe
through a proxy.
1.
Select the Configure Firewall Services option.
Select CommServe is reachable only through a proxy option and click
Next to continue.
2.
Enter the name of the computer in CommServe client name
field.
Click Next to continue.
The name of the CommServe client is case sensitive. Ensure to
specify the name with the correct letter case.
3.
Enter the following:
The local (NetBIOS) name of the client computer.
The TCP/IP IP host name of the NIC that the client computer must use to communicate with the CommServe
Server.
NOTES
Do not use spaces when specifying a new name for the Client.
The default network interface name of the client computer
is displayed if the computer has only one network interface. If the
computer has multiple network interfaces, enter the interface name that
is preferred for communication with the CommServe Server.
If a component
has already been installed, this screen will not be displayed; instead, the
install program will use the same name as previously specified.
Click Next to continue.
4.
Provide the following information:
In the Proxy HTTP/HTTPS tunnel port number field, provide
the tunnel port on which the proxy is expecting connections to the CommServe.
If the proxy is behind a port-forwarding gateway, then provide the port
number of the port-forwarding gateway to reach the CommServe.
In the Proxy hostname or IP address field, specify the hostname
of the proxy through which the CommServe can be reached. If the proxy
is behind a port-forwarding gateway, then provide the host name or the
IP address of the port-forwarding gateway.
In the Proxy client name field, specify the client name of
Calypso proxy.
The name of the proxy client is case sensitive. Ensure to specify the
name with the correct letter case.
Click Next to continue.
5.
Provide the details of the proxy computer:
HTTP Proxy hostname or IP address: Specify the hostname or
IP address through which the CommServe can be reached.
HTTP Proxy port number: Specify the port number through which
the CommServe can be reached.
Click Next to continue.
6.
Specify the port numbers to be used by the Bull Calypso
Communications Service (CVD) and Bull Calypso
Client Event Manager (EvMgrc)
Services.
Click
Next to continue.
Valid range for the port number is between 1024 and 65000.
Ensure that the port numbers specified here are within the
valid range and are not used by any other services.
7.
If the CommCell is in the Lockdown mode, specify the path
to the folder in which the CommCell HTTPS certificates are available.
