This page lists the UNIX updates that are included in this Service Pack. New updates in this Service Pack are highlighted.
Choose an operating system to view the associated updates:
Update No. |
Installed On |
Description |
| 34715 | Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, SAP for MaxDB, | 1. Sap/Oracle command line backup may fail intermitently. |
| 34714 | MediaAgent, | 1. Backup and reconstruction of Deduplication Database may fail. |
| 34681 | Base0 Client, Media Explorer, | 1. Restore Enhancements for VMware. 2. Documentum restores fail after installing SP1b 3. CVMA occasionally crashing on index cleanup |
| 34680 | Media Explorer, Base0 Client, | 1. DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2. Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3. Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34661 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, MediaAgent, | 1. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 2. Supports Conversion of 8.0 version of DDB to 9.0 version. 3. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34646 | MediaAgent, | 1. When CS and MA are different machines, Tape Catalog job may cause a CVMountd crash. 2. Robo offline source CS import via MA may fail to copy dumps to GRC cell. 3. Enhancement for Dell disk array configuration. |
| 34639 | Documentum iDataAgent, Oracle iDataAgent, | 1. Oracle control file restore fails with error "Database not in STARTED mode". |
| 34636 | Documentum iDataAgent, DB2 iDataAgent, | 1. DB2 log manager stops archiving logs when previous Log retrieval fails. 2. DB2 Backup fails when performance satistics is enabled with registry key. |
| 34610 | File System NDMP Restore Enabler, MediaAgent, | 1. Customer backs up their data using a Unix MediaAgent. Customer content indexes data using a Windows MediaAgent. Customer does a compliance search, selects a file to restore and this kicks off a restore. This restore completes successfully, the data ends up in the location where it's supposed to, but the compliance search gui reports the operation failed with an X in a red circle. In short everything seems to work, but it's reporting failure. 2. Power restores for NAS data fail if a firewall is active between the webserver and the commserver. 3. Restore to windows of files located in very deep directories fail if the full path of the filer exceeds 256 characters. 4. Content Indexing jobs for large NetApp backups are failing. |
| 34585 | Base0 Client, Media Explorer, UNIX File System iDataAgent, File Archiver for UNIX Agent, | 1. DC Support with Turbo FS Agent. 2. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 3. SILO backup job goes to pending due to scan failure. 4. Directories specified in the exceptions list not being backed up. 5. Failed files are not added into next incremental backup. 6. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 7. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 8. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Base0 Client, Media Explorer, | 1. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Base0 Client, | 1. Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2. CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34542 | Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, | 1. Media Agents goes offline intermittently due to registry permission issues. |
| 34538 | Base0 Client, Lotus Notes Database iDataAgent, Resource Pack, Media Explorer, | 1. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 2. DB2 snap multistream restores may get stuck trying to detect SCSI devices 3. Snap Protect backup fails when HDLM multipath is configured on Linux. 4. Adding support for agile addressing on HP-UX |
| 34526 | Media Explorer, Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34512 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, UNIX File System iDataAgent, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34504 | Lotus Notes Document iDataAgent, | 1. Restore of Database by Lotus Notes Document iDataAgent corrupts the database on Solaris and AIX platforms 2. Emails are not restored in Inbox on Linux platform |
| 34485 | Image Level iDataAgent, Image Level ProxyHost iDataAgent, UNIX File System iDataAgent, MediaAgent, File Archiver for UNIX Agent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, DB2 iDataAgent, Lotus Notes Database iDataAgent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34473 | Media Explorer, MediaAgent, | 1. Restore from NAS auxilliary copy may fail with "no more chunks in last archive file, ending restore." 2. Auxilliary copy for NAS direct attach tape drives using hardware encryption fails with an error reading from the source tape. 3. 1). Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table". 2). Auxcopy may fail with error "Cannot get encryption keys for archive file NNNN", if the source copy is done with encryption and Store-Priming operations. 3). After Commcell Migration, Restore/Auxilliary copy of the migrated data on a local commcell policy (Local Mount Path) may fail. |
| 34451 | Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34413 | Base0 Client, | 1. Failure of cvsnap when device mounted from a solaris local zone 2. Adding support for native VxVM snapshots on Solaris. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Predictor for Continuous Data Replicator, Resource Pack, Base0 Client, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Simpana startup script failure 2. Simpana startup script failure 3. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 4. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 5. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, Base0 Client, | 1. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3. Firewall related binaries are not packaged for 64bit platforms 4. Tunnels may not failover in cluster firewall environment |
| 34380 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. 13. Fix for updating baseline of SP1a on GUI 14. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 15. Fix for removing numbered update, that has an update number partially matching with another package 16. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 17. Partial enhancements for RemoveUpdates to expire old updates. 18. Added support in update installer to wait for sidb process. |
| 34352 | Base0 Client, Media Explorer, | 1. Snap mount operation failing. 2. Snap operation failing on multipath devices on Linux platform. 3. Snap mount failing on SuSE 11 4. Unmount failing during Oracle RMAN Snap to tape backup. 5. Mount of SAP/Oracle backup volumes failing. 6. Snap is failing on Linux when file system mounted using device name /dev/dm-*. |
| 34327 | DB2 iDataAgent, SAP for MaxDB, Continuous Data Replicator, UNIX File System iDataAgent, File Archiver for UNIX Agent, Documentum iDataAgent, Lotus Notes Database iDataAgent, SAP for Oracle, Oracle iDataAgent, Base0 Client, Media Explorer, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. Utilize multiple streams during snap backup copy and restore from snap. 4. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 5. Archiver fails in Stubbing phase. 6. Active Directory browse fails to show items after running synthetic full. 7. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 8. Support for switch database mode GUI option for Oracle snap restores 9. SAP restore Job progress fix for multi-stream restores |
| 34317 | Base0 Client, Media Explorer, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34288 | MediaAgent, | 1. Snap creation may fail for HP EVA based SnapProtection feature, if source volume UUID and WWN values are different. 2. Unmap of the snapshot/clone may fail if the host group with multiple FC initiator ports configured on HP EVA or LSI storage array. 3. iSCSI support for HPEVA and LSI arrays. 4. Exchange Database snap protect job may fail in copy operation on HP EVA or LSI array. |
| 34275 | Base0 Client, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Lotus Notes Database iDataAgent, File Archiver for UNIX Agent, Media Explorer, | 1. Image File level restore fails on 32/64-MA if File System is not installed on the MA |
| 34274 | File Archiver for UNIX Agent, | 1. Errors reported by cxfs_upgrade are now logged and will not cause the archive job to fail after an upgrade. 2. cxfs_upgrade -f option added to allow manual upgrade of individual files in the case of failures. 3. Minor fix in usage message. |
| 34187 | Data Classification Enabler, | 1. Communication to DataClassification Service fails when firewall is configured |
| 34108 | RootOfCPUFolder, | 1. Added support for recording unix group/other user's access 2. Added support for 64bit installs via reduced/native packages 3. Custom package creator to not show all OEM brands. |
| 34100 | Base0 Client, Media Explorer, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34097 | DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, File Archiver for UNIX Agent, MediaAgent, Pre-PostInstall, Resource Pack, Base0 Client, Predictor for Continuous Data Replicator, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 2. DB2 Incremental backup throughput is affected by archive logs inclusion in backup image. Special Note: Please set the following registry key to Yes under Db2Agent/.properties on DB2 client machine. SKIPLOGSINBKPIMG Yes 3. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 4. FileSystem Backup Jobs pending with error code [82:156] |
| 34092 | MediaAgent, Documentum iDataAgent, Lotus Notes Database iDataAgent, SAP for Oracle, Oracle iDataAgent, Base0 Client, Media Explorer, | 1. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get array info. Please enter array info from Array Management" 2. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 3. Snapprotect should pick pre-established bcv mirrors and incrementally establish before splitting the bcv 4. Registry hook to use pre-masked devices during mounting and leave them masked during unmounting for EMC symmetrix Special Note: On proxy machine registry key "nDisableConfigChange" when present under "iDataAgent" and set to 1 uses pre masked BCV for mounting. 5. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 6. Snap backups would fail when symmetrix device numbers for source disks exceeds 999 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 9. Mount for raw device may fail on AIX and Sun due to conversion. 10. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 11. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 12. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 13. Support SnapProtect for VMAX Symmetrix Array. |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Base0 Client, Media Explorer, | 1. Restores may fail from Variable Content Alignment enabled backups. 2. Dedupe not working for Synthetic Full backups 3. DB2 Backup fails with library load error on AIX. |
| 34007 | MediaAgent, | 1. Fixes issue where application data size displayed is much greater than actual backed up data size, when there are lots of sparse files or Archiver stubs in subclient |
| 33987 | Continuous Data Replicator, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33984 | Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33939 | Sybase iDataAgent, | 1. Support for Sybase backup and restores in a firewalled environment |
| 33906 | Lotus Notes Database iDataAgent, MediaAgent, Resource Pack, Base0 Client, Predictor for Continuous Data Replicator, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Enhancement to allow marking backup files as read only for cloud devices that supports retention locking. 2. Enhancement to support Dell DX Object Storage Platform and HDS HCP. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. DASH Auxilliary Copy job may go to pending with job pending reason: Cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported. 8. Content Indexing job read failure from a chunk created by a suspended backup job on a Hardware single instance target. 9. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 10. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. 11. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. 12. Prunable data on disk associated with DeDup storage policy may not be removed due to registry lookup failure. |
| 33878 | Base0 Client, Media Explorer, SAP for Oracle, | 1. Special characters in the data cause SRM Data Collection jobs to fail. 2. Enhancement for VSA restore changes. Support for additional parameters during restore. 3. End User Search capability for Outlook Add-In Users 4. Read Ahead NAS backup options may not be available after upgrade to 9.0 5. Store additional metadata in index for virtual server agents 6. Capacity Usage table is currently not available in License Summary Report 7. Protected files report show incorrect file size. 8. Virtual Server Agent browse may fail when number of volumes in a virtual machine is greater than 20 9. Exchange Mailbox Archiver stub recalls may fail if user's smtp address has a case change in the middle of a cycle. 10. Browse fails after upgrading Media agent to 9.0 11. Commcell console does not allow selection of restore only exchange MB agents 12. Server side changes for enhanced VSA restores. |
| 33737 | Data Classification Enabler, UNIX File System iDataAgent, | 1. Incremental backups using DC on HP-UX backup all the data. Incremental FS scans with reference time less than the DC DB creation time should fall back to regular scan. 2. UNIX DC install will fail if FS IDA is already installed and patched to SP1a. |
| 33672 | MediaAgent, Base0 Client, Media Explorer, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33615 | Base0 Client, Media Explorer, Image Level iDataAgent, Image Level ProxyHost iDataAgent, | 1. Backup of Image Level on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow 2. CVD crashes when I try to detect Volumes with Volume Explorer. The issue happens wnen there is an extra folder under /dev/rdsk. 3. Restore of 3TB volume with 90 percent of the capacity used is found to be corrupted after restore. 4. Failure to detect all devices using volume explorer on redhat6.0. |
| 33585 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. CVD may crash on a busy firewalled setup 2. Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels. 3. sBindToInterface registry setting didn't work with hostnames (only with IPs) 4. Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks 5. Persistent tunnels were prebinding to the wrong IP on roaming laptops 6. Log browse across firewalls may hang if SSL is in use 7. CVD trying to do name to IP resolution every second 8. Log browse across firewalls may hang if SSL is in use 9. Backups through firewall may become unresponsive 10. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 11. Fix for CVD service not coming up sometimes. 12. Automatic scheduled jobs would not run after failing to get the job status. 13. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33578 | Lotus Notes Database iDataAgent, | 1. In browse and restore, when parent directory is selected for restore, checking for delimiter in the path is throwing exception and also when we get data from multiple archive files, calling initgroups second time throws an error. 2. Restore All Version of database for Lotus Notes Database iDataAgent fails on UNIX platforms |
| 33569 | Base0 Client, | 1. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 2. Fix for copying servicepack.ini of unix SP 3. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 4. Copy software fails to update installer files. 5. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33531 | Domino Mailbox Archiver Agent, | 1. Unnecessary persistent recoveries are kicked off on cluster Domino nodes.
CvlnDMHook log not getting rolled over.
Special Note:
Domino server need to be restarted after applying the update.
Registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\AvoidInvalidRecalls" needs to be set to prevent persistent recoveries during stubbing. Valid values for this key are 0 or 1. An optional registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\StubbingDelay" defines time in seconds, after stubbing, during which persistent recoveries will not be allowed. Absence of this key will default the value to 120 seconds (2 minutes). This update contains logs rollover functionality along with the resolution to prevent unnecessary persistent recovery. Following are the registry keys for configuring log roll over: "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\LogFileSize" Defines size in MB. (For eg, if user set its value to 10, maximum size of log file will be 10MB). If key is not present the size will default to 5 MB. "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\NumLogFiles" Defines number of files to keep for roll over (History). Absence of key defaults this number to 5. With the default values of the keys, system will maintain a total of 25 MB size of logs. The log files will have "_n" appended to the original file name with cvlnDMHook.log_1 being the latest rolled over log file. All the above-mentioned registry keys are DWORD values. For Unix platforms, log roll over registry keys are following parameters in notes.ini file: CvLogFileSize and CvNumLogFiles. Behavior and valid values for these parameters are same as above mentioned Windows registry values. |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33486 | MediaAgent, | 1. Backup Copy of Virtual Server Snap fails in mounting of snap |
| 33443 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33411 | 1-Touch Server, UNIX File System iDataAgent, | 1. Linux 1-Touch backup fails on systems having multipath devices configured.
Special Note:
1] Install this update on the client before taking 1-Touch backups
(required only on systems containinng multipath disks)
2] Use the bootcd during restore that contains this update.
2. Added new YCP GUI support.
3. Enhanced 1-Touch recovery via response file created during the backup.
4. AIX 1-Touch backup failing on a systems with disabled Volume Groups.
5. AIX 1-Touch backup failing when NIM network is used with Gigabit
Ethernet-SX PCI-X Adapter
Special Note:
The 1-touch backup will fail when one or more in-active volume is
present. To get successful 1-Touch backup, use the following registry to
skip the inactive volume groups.
Registry path :
/etc/CommVaultRegistry/Galaxy/ |
| 33406 | Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Command line support for creating VSA subclient 3. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 4. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 5. Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | DB2 iDataAgent, File Archiver for UNIX Agent, MediaAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Lotus Notes Database iDataAgent, Media Explorer, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. DB2 Snap Backup fails while accessing online logs files. 4. CvMountd may crash if the network is slow 5. Utilize multiple streams during restore from Snap and Sanp Backup Copy. 6. Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. 7. Random file-level restore failures from Image backups on AIX. |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33244 | QSnap, | 1. Backup of Image Level on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow 2. Backup of ImageLevel on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow. |
| 33205 | External Data Connector, | 1. VSA Mining client side changes 2. Adds support for VMware Application Level quiescing when using ESX 4.1 and Windows 2008 r2 3. Sometimes discovery process is failing during processing magnetic libraries list |
| 33151 | Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33072 | RootOfCPUFolder, | 1. 1.custom package creation for oracle/db2 ida's on s390 platform 2. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | MediaAgent, Lotus Notes Database iDataAgent, Media Explorer, SAP for Oracle, Continuous Data Replicator, Base0 Client, | 1. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 2. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 3. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 4. SAP datafile restores from Commcell GUI fails 5. SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 6. Oracle Snap Restore fails if incremental tape backup is run after the Snap. 7. Snap revert operation failing on Solaris client when mount point is in root directory. 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32980 | MediaAgent, | 1. Hardware snap creation will get failed if more than 2 filers configured in array management screen. Special Note: In New XCLI installation on VSA proxy scenario use below registry key to avoid reboot to set XCLI tools path. "'iDataAgent\XCLI_BINARY_LOCATION'" and set the value to install path of xcli example: "C:\Program Files (x86)\XIV\GUI10" |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32951 | Base0 Client, Media Explorer, MediaAgent, | 1. Recalls on Exchange Mailbox Archiver stubs fail after upgrading CC and MA from 8.0 to 9.0 2. Index restore crashes during virtual server incremental backups 3. Fix for Virtual server iDA point in time restores from snap backups 4. createIndex sometimes fails with index moved between different MA machine architectures 5. image level iDA file browse fails on sparc solaris 64 bit media agent 6. Browse enhancements for exchange mailbox archiver agent to show all stubs within a given time range. 7. Archiver jobs fails after upgrading CS and MA to 9.0 and when data was erased through Browse prior to upgrade. 8. Initial backups might fail going to upgraded MA from 8.0 to 9.0 with grid store enabled and index cache server configuration. |
| 32949 | Base0 Client, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32945 | Base0 Client, Media Explorer, MediaAgent, | 1. DDB reconstruction fails. 2. DDB simulation tool hangs when multiple simulations are attempted in parallel on the same machine. 3. NAS iDA backups to a tape drive on a NetApp file server are failing in the archive index phase with an error indicating "an internal software error occurred". Failure happens when using ONTAP 7.3.3 and IPv6 is not configured on the MediaAgent. 4. Dedup backups to dedup storage policy may stop working with the error: "Failed to start a transaction" 5. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 6. Auxcopy process may crash intermittently when dedup read ahead feature is active 7. DeDup Reconstruction job may fail in the [Add Records] phase. 8. Auxiliary Copy operation from DeDup enabled storage policy copy may fail if look ahead read is enabled. 9. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. |
| 32936 | Continuous Data Replicator, Media Explorer, Base0 Client, | 1. Added NFS Snap Protect support for Solaris Local Zone. 2. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 3. When mounting a snap do not guarantee space. 4. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32909 | Base0 Client, | 1. Enable HDS ShadowImage differential resynch for HDS SnapProtect. Special Note: To enable the fix in this update, create the following DWORD value under the EventManager section of the Client registry: CVHDS_USE_DELETED_SHADOWIMAGE and set the value to 1. 2. Unmount is reported as failed from HDS Snap Engine even if it is successful. Special Note: Stop the services before applying this update |
| 32719 | External Data Connector, | 1. Discovered Netbackup exported media are not shown in the media information report 2. Support Pre-deployment survey for external data collector. Special Note: Refer to online document External Data Connector Pre-Deployment Survey. 3. Support for TSM version 6.1.3 4. Fix for Fastpass discovery job running CVForeignHandler.exe module at 100% CPU. 5. Vsa snap mining provider and mining changes. 6. Support for TSM 6.2. 7. Support for the migration of TSM Enhanced Schedules. 8. Support for Tsm output files with unix format. |
| 32695 | DB2 iDataAgent, Base0 Client, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Lotus Notes Database iDataAgent, Media Explorer, | 1. MySql restore fails with library load error 2. Log Restore by LSN range fails on HP-UX IA64 3. SAP/Oracle restore fails from tape copy of snap data. |
| 32661 | File System Filter Driver, | 1. Data Classification agent process DcIfind hangs. 2. AIX DC Support |
| 32638 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, UNIX File System iDataAgent, | 1. archiveIndex not starting on MAs Incremental backups fail in ArchiveIndex phase when there is nothing to backup. 2. Ifind goes to pending with loss of control for lotus Idas on linux-x64. 3. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 4. Laptop backup progress indicator isn't showing throughput or amount of transferred data. 5. Adds File Archiver support for new Ibrix FS. 6. More information displayed on backup tray utility 7. Name of the current file wasn't shown in backup tray utility on UNIX 8. Total file count was not set on UNIX 9. Final job status was not passed to backup tray utility 10. Reason why new jobs cannot be scheduled was not passed to backup tray utility |
| 32539 | Base0 Client, | 1. Fibre Channel card not detected on Solaris OS setup with multiple Fibre Channel cards. |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32499 | NDMP Remote Server, | 1. NAS iDA dedup rate is not good when using compression with dedup. 2. Restore from NetApp NDMP job appears to hang. Problem occurs when the file server requests a read from a past offset. |
| 32384 | UNIX File System iDataAgent, Data Classification Enabler, | 1. DC Performance Enhancements Special Note: This update will rebuild DC Databases for all volumes linux_9.0.0B84_31906 and hp_9.0.0B84_31907 are pre-requisites |
| 32361 | Base0 Client, Lotus Notes Database iDataAgent, Resource Pack, MediaAgent, Media Explorer, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. |
| 32357 | Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, | 1. Received Time show 1970-1-1 8:00:00 in web search GUI when displaying notes mail |
| 32316 | SRM UNIX File System Agent, UNIX File System iDataAgent, Base0 Client, | 1. NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" 2. Unix File system backup is slow. 3. The UNIX File System backup will not backup data of a symbolic link when it is a sub-client, the "Expand symbolic links of subclient content" is checked, the symbolic link located in the root directory and it is linked with a relative path started with non-path delimiter symbols ('.' or '/'). 4. This update enables reporting of multipath devices and file system configured on multipath device mapper. |
| 32297 | MediaAgent, | 1. New media are not detected after adding the media to the magazine for some libraries. |
| 32245 | Base0 Client, | 1. Added support to host DC database on a central non monitored volume. |
| 32234 | Base0 Client, | 1. Net app images for some languages have incorrect images for applet launch page |
| 32196 | Continuous Data Replicator, | 1. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. 2. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. Fix for installing CDR on sol2.9 |
| 32117 | Informix iDataAgent, Sybase iDataAgent, DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. DB2 agent restores all log files with the matching sequence number. 2. Oracle, DB2, Informix and Sybase Backup/Recovery support for Dedupe with Variable content alignment(VCA). |
| 32031 | MySQL iDataAgent, | 1. Failure in recurring log restore when only single db is restored. |
| 31870 | Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Oracle offline backups with Lightsout script fails in csh environment. |
| 31868 | Media Explorer, MediaAgent, Continuous Data Replicator, Base0 Client, | 1. CVMA or CVFSSnap may crash while running clariion backups. 2. CVMA crashes when the registry key SYMAPI_HOME_DIR is not created in Unix platforms. 3. HDS Snap cleanup fails with the error "Replication group not found". 4. Clariion snap and clone jobs do not use the device mapper pseudo device path when Linux native MPIO is installed. 5. Clariion Snap/Clone jobs may go to pending with error "Failed to get device array info from device path" 6. After running SRM Analysis on NDMP client, some of the files with no extension are not reported properly by SRM Reports. 7. During a Nas backup, if the Job Manager service goes down for some reason, nasbackup continues backing up data. nasBackup should detect this condition and fail the backup phase with a relevant pending reason. 8. XIV snapshot mount operation on a VM (hosted on ESX server) fails. 9. Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete. 10. Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 11. VmWare backup copy job fails with error "Failed to get device list" while mounting Clariion Disk 12. Added snap engine support for LSI OEM Disk Arrays with VMWare. 13. Enhancement to support VMWare for HDS snap engine 14. Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit." 15. Unable to run successful VSA SnapProtect backups in some cases when the ESX server has huge number of disks. 16. Added required support in addition to others for NAS Snap Protect. 17. Add support for Snap Protect to the NetApp NAS iDA. |
| 31825 | Base0 Client, | 1. Linux 1-Touch GUI does not save the disk information after mapping is done |
| 31806 | Base0 Client, | 1. Laptop Backup install support for unix install |
| 31761 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, DB2 iDataAgent, UNIX File System iDataAgent, File Archiver for UNIX Agent, Lotus Notes Database iDataAgent, Base0 Client, Media Explorer, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Fixed a condition where Install and Uninstall Software could fail without reason. 2. Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID. Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. 3. Unable to recall stub files after deleting the subclient. 4. Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store. 5. In certain cases, creation of storage policy pointing to a global deduplication policy fails. 6. Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console 7. SRM FLA Filters are not working when User Name or Group Name contains spaces. 8. Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. 9. NAS Backup is failing in round-robin scenario 10. Stubbing fails during Turbo FS incremental job if files were renamed or deleted. 11. Support for 1Touch ResponseFile configuration. 12. EvMgrC does not start after installing 9.0 SP1. |
| 31737 | MediaAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, DB2 iDataAgent, Lotus Notes Database iDataAgent, Media Explorer, UNIX File System iDataAgent, File Archiver for UNIX Agent, Base0 Client, | 1. Send Log Files operation from CommServ console when run on Unix clients does not gather galaxy log files. 2. Enhanced File System IDA to support archiving. 3. Enhanced File System IDA to support archiving. 4. EvMgrC failing to start on Mac OS X. |
| 31660 | Base0 Client, Media Explorer, | 1. Enhancement to allow end users to browse via Web console 2. QSDK crashes on running multiple On Demand Backups from command line. |
| 31649 | UNIX File System iDataAgent, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. Job management from mobile devices. 2. Taskbar icon to show status of currently running backups and information about previous backups. |
| 31570 | Base0 Client, | 1. cvlaunchd leaks memory |
| 31566 | Base0 Client, | 1. SDR may restart processing from the beginning in case of network errors instead of from the point where the error occurred. |
| 31499 | SAP for Oracle, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, MediaAgent, | 1. Backup might fail when too many jobs are run. 2. GXHSMService crashes during service shutdown or service restart. 3. Support unix intermediary media agents for pod cell imports. 4. Fixes folder deletion warning during deconfiguration of Dell DX6000 and other Object based cloud library mount path. 5. Automatic schedule support for laptop and desktop backup. |
| 31447 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. Fixes occasional CvMountd crash on Unix MediaAgents. 2. Enhancement to allow exchange and sharepoint mining from VSA snaps 3. Support for laptop and desktop backups Fix for cluster upgrades for missing DB package rows. Support for Unix Turbo File System |
| 31444 | MediaAgent, File Archiver for UNIX Agent, Documentum iDataAgent, Base0 Client, Lotus Notes Database iDataAgent, Media Explorer, Oracle iDataAgent, SAP for Oracle, | 1. Backups might fail for certain iDAs when staging index cache location is enabled. 2. PostgreSQL iDA Table level restores are failing 3. UpdateIndex might fail with error "Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover" when several backup jobs start running simultaneously. 4. Backup job might fail with error "Loss of control process archiveIndex.exe" when several backup jobs start running simultaneously. 5. Fix for browse failure when a job fails over between multiple datapaths and Index Cache Server is configured. 6. To remove use exact index option and for the system to automatically choose what index to use. 7. TurboFS backups and restores sometimes fail. |
| 31425 | UNIX File System iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, File Archiver for UNIX Agent, | 1. GXHSMService dumps core during service shutdown. 2. Enhanced File System IDA to support archiving. |
| 31336 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, | 1. Lotus Notes Document agent restores and Data MIgrator recalls are failing on domino 64 bit running on AIX64 . |
| 31327 | Media Explorer, Base0 Client, | 1. Job Pending reason is not correct when client side dedup backup is
attempted to an upgraded 8.0 DDB.
2. Restores from re-encrypted copy may fail if the Auxilliary copy operation
was performed using a Unix MediaAgent with 'Optimize for concurrent LAN
Backups' option turned off.
3. Backup might fail when too many jobs are run.
4. Enables the "Variable Content Alignment" feature
5. SQL transaction log backup may fail with error "The control process for the
previous phase is still running. PID [ |
| 31283 | Base0 Client, | 1. Adding VCS specific scripts required for installation. |
| 31209 | UNIX File System iDataAgent, External Data Connector, DB2 iDataAgent, Base0 Client, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Media Explorer, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, MySQL iDataAgent, | 1. Fixes CVForeignHandler.exe crash during EDC discovery phase. 2. GXHSMService crashes during recalls on a host with only VM (no PM) installed. 3. EDC Discovery on 5.1 NBU server (hpux) failed with error "Netbackup services are not running". 4. Sometimes Discovery job fails on machines where date format is different from mm/dd/yyyy or media server is not client on the Master server Special Note: This update MUST be installed along with update with form id 07678 5. EDC support for IBM TSM 6. File permissions on ORASBT.log is getting reset on restricted environments. Special Note: set registry key sSKIPRESETORASBTLOGPERMS to Yes under OracleAgent/.properties. 7. Discover job merge failure when XML files are collected with decoupled database capture. 8. Hide TSM admin passwords in logging. 9. JPR for incorrect login/password. 10. Unix Netapp NFS Snap protect support SILO DDB restore fails to restore DDB files. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 11. Support for decoupled method of EDC TSM discovery using outputs of TSM commands run. 12. Integrated install and File System IDA with Unix VERITAS Cluster. 13. Enhanced File System IDA to support archiving. 14. SILO DDB backup fails to backup DDB files. |
| 31175 | Base0 Client, Media Explorer, | 1. Improves HPUX dedup backup performance. |
| 31146 | Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, MediaAgent, Media Explorer, | 1. Silo Archival job may fail with missing chunk error. 2. Data size in Silo shown in Storage Policy Copy Properties and Storage Policy Report does not include the size of volumes processed by Silo Disk Cleanup. 3. Size of Dedupe DB is shown incorrectly in the Storage Policy report. 4. New option in Commcell configuration report to show index cache content information Special Note: This update needs to be installed with the GUI update form 07496 5. Notify GUI Server Developers: Item [^10] missing from cvEncode. should not be visible in GUI. 6. Restore/Auxilliary Copy jobs may not progress when Silo Retrieval job gets interrupted. 7. SILO Archived DDB is not removed from disk. 8. Jobs may fail to query CommServe Version string from Media Agent when CommServe is under heavy load. 9. Enhancement to support Dell DX Object Storage Platform and HDS HCP. Special Note: Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data. Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file. |
| 31140 | Base0 Client, | 1. Ability to run snap backup from qcommand followed by movement to tape job 2. qcommand.log may log passwords when using qoperation execscript command with password inputs 3. QSDK.log log login credentials at default logging level. |
| 31123 | Base0 Client, | 1. Installation of Filesystem Agent Fails on Freebsd 7/8 amd64 |
| 31094 | MySQL iDataAgent, | 1. MySQL backup goes into pending state |
| 30962 | MediaAgent, Base0 Client, Media Explorer, | 1. Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails. 2. Mount of the HDS snap is failing on partitioned device. 3. Snap reverts fixes for HDS Snap Engine. 4. Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) |
| 30931 | MySQL iDataAgent, | 1. Invalid bin log (data) path specified in Instance creation causes data loss. |
| 30926 | Base0 Client, Media Explorer, | 1. QSDK crashes on running multiple On Demand Backups from command line. |
| 30902 | MySQL iDataAgent, | 1. Database names with special characters have problems in backup/restore operations. Special Note: 1. We don't support database names containing single quotes. |
| 30870 | Sybase iDataAgent, | 1. Sybase database discovery hangs for instance with many databases. |
| 30706 | UNIX File System iDataAgent, 1-Touch Server, | 1. AIX 1-Touch backup job is failing with message "The MAC address is not set or incorrect in NIM Master for this client." Special Note: The standard Ethernet Network adapter must be available on the 1-Touch client machine and configured to be able access 1-Touch boot server (NIM Master machine). All EtherChannel adapters must be configured with interface number higher than any standard Ethernet Network adapter. The NIM Master must be configured with Network resource for network of that standard Ethernet Network adapter on NIM Client machine. After 1-Touch recovery the machine will be reboot to finalize the configuration. |
| 30660 | SAP for MaxDB, Continuous Data Replicator, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Backup with Flash Recovery Area fails intermittently. 2. Mark Restore job status to pending if encountered any errors. 3. Oracle 11GR2 Table Restore fails with Tablespace not self contained error. |
| 30641 | MediaAgent, | 1. ScanScsiTool was missing from 32-bit Media Agent Package on Linux. |
| 30527 | Base0 Client, Lotus Notes Database iDataAgent, Resource Pack, Media Explorer, | 1. Two library were missing from CVGxBase0 package. |
Update No. |
Installed On |
Description |
| 34680 | Base0 Client, | 1. DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2. Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3. Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34661 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 2. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. 3. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 4. Supports Conversion of 8.0 version of DDB to 9.0 version. 5. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34585 | UNIX File System iDataAgent, Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Internal, Resource Pack Limited, | 1. DC Support with Turbo FS Agent. 2. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 3. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 4. SILO backup job goes to pending due to scan failure. 5. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 6. Directories specified in the exceptions list not being backed up. 7. FileSystem Backup Jobs pending with error code [82:156] 8. Failed files are not added into next incremental backup. 9. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 10. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 11. Media Agents goes offline intermittently due to registry permission issues. 12. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Base0 Client, | 1. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Base0 Client, | 1. Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2. CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34538 | Base0 Client, Resource Pack, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. 2. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 3. DB2 snap multistream restores may get stuck trying to detect SCSI devices 4. Snap Protect backup fails when HDLM multipath is configured on Linux. 5. Adding support for agile addressing on HP-UX |
| 34526 | Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34512 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34485 | UNIX File System iDataAgent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34451 | Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Resource Pack, Base0 Client, Resource Pack Internal, Resource Pack Limited, | 1. Simpana startup script failure 2. Simpana startup script failure 3. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 4. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 5. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2.. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3.. Firewall related binaries are not packaged for 64bit platforms 4.. Tunnels may not failover in cluster firewall environment |
| 34380 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Fix for updating baseline of SP1a on GUI 13. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 14. Fix for removing numbered update, that has an update number partially matching with another package 15. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 16. Partial enhancements for RemoveUpdates to expire old updates. 17. Added support in update installer to wait for sidb process. |
| 34352 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 6. Support SnapProtect for VMAX Symmetrix Array. 7.. Unmount failing during Oracle RMAN Snap to tape backup. 8.. Mount of SAP/Oracle backup volumes failing. 9.. Snap is failing on Linux when file system mounted using device name /dev/dm-*. 10.. Snap mount operation failing. 11.. Snap operation failing on multipath devices on Linux platform. 12.. Snap mount failing on SuSE 11 |
| 34327 | UNIX File System iDataAgent, Base0 Client, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 4. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 5. Support for switch database mode GUI option for Oracle snap restores 6. SAP restore Job progress fix for multi-stream restores |
| 34317 | Base0 Client, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34275 | Base0 Client, | 1. Image File level restore fails on 32/64-MA if File System is not installed on the MA |
| 34108 | RootOfCPUFolder, | 1. Added support for recording unix group/other user's access 2. Added support for 64bit installs via reduced/native packages 3. Custom package creator to not show all OEM brands. |
| 34100 | Base0 Client, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Base0 Client, | 1. Restores may fail from Variable Content Alignment enabled backups. 2. Dedupe not working for Synthetic Full backups 3. DB2 Backup fails with library load error on AIX. |
| 33984 | Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33906 | Base0 Client, | 1.. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 2.. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. 3.. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. |
| 33878 | Base0 Client, | 1. Special characters in the data cause SRM Data Collection jobs to fail. 2. Enhancement for VSA restore changes. Support for additional parameters during restore. 3. createIndex sometimes fails with index moved between different MA machine architectures 4. End User Search capability for Outlook Add-In Users 5. Read Ahead NAS backup options may not be available after upgrade to 9.0 6. Capacity Usage table is currently not available in License Summary Report 7. Browse fails after upgrading Media agent to 9.0 8. Commcell console does not allow selection of restore only exchange MB agents 9. Server side changes for enhanced VSA restores. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33585 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. CVD may crash on a busy firewalled setup 2. Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels. 3. sBindToInterface registry setting didn't work with hostnames (only with IPs) 4. Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks 5. Persistent tunnels were prebinding to the wrong IP on roaming laptops 6. Log browse across firewalls may hang if SSL is in use 7. CVD trying to do name to IP resolution every second 8. Log browse across firewalls may hang if SSL is in use 9. Backups through firewall may become unresponsive 10. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 11. Fix for CVD service not coming up sometimes. 12. Automatic scheduled jobs would not run after failing to get the job status. 13. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33569 | Base0 Client, | 1. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 2. Fix for copying servicepack.ini of unix SP 3. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 4. Copy software fails to update installer files. 5. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33443 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33406 | Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Command line support for creating VSA subclient 3. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 4. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 5. Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. To remove use exact index option and for the system to automatically choose what index to use. 2. MySql restore fails with library load error 3. Add support for Snap Protect to the NetApp NAS iDA. 4. SAP/Oracle restore fails from tape copy of snap data. 5. DB2 Snap Backup fails while accessing online logs files. 6. CvMountd may crash if the network is slow 7) Utilize multiple streams during restore from Snap and Sanp Backup Copy. 8) Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. |
| 33303 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33247 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33151 | Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33090 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33072 | RootOfCPUFolder, | 1. 1.custom package creation for oracle/db2 ida's on s390 platform 2. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | Base0 Client, | 1. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 2. Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete. 3. Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 4. Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit." 5. Unable to run successful VSA SnapProtect backups in some cases when the ESX server has huge number of disks. 6. Added required support in addition to others for NAS Snap Protect. 7. Added NFS Snap Protect support for Solaris Local Zone. 8. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 9. When mounting a snap do not guarantee space. 10. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 11. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 12. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 13. SAP datafile restores from Commcell GUI fails 14.) SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 15.) Oracle Snap Restore fails if incremental tape backup is run after the Snap. 16.) Snap revert operation failing on Solaris client when mount point is in root directory. 17. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32949 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32638 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, UNIX File System iDataAgent, | 1. archiveIndex not starting on MAs Incremental backups fail in ArchiveIndex phase when there is nothing to backup. 2. Ifind goes to pending with loss of control for lotus Idas on linux-x64. 3. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 4. Laptop backup progress indicator isn't showing throughput or amount of transferred data. 5. Adds File Archiver support for new Ibrix FS. 6.) More information displayed on backup tray utility 7.) Name of the current file wasn't shown in backup tray utility on UNIX 8.) Total file count was not set on UNIX 9.) Final job status was not passed to backup tray utility 10.) Reason why new jobs cannot be scheduled was not passed to backup tray utility |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32316 | SRM UNIX File System Agent, UNIX File System iDataAgent, Base0 Client, | 1. NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" 2. Unix File system backup is slow. 3. The UNIX File System backup will not backup data of a symbolic link when it is a sub-client, the "Expand symbolic links of subclient content" is checked, the symbolic link located in the root directory and it is linked with a relative path started with non-path delimiter symbols ('.' or '/'). 4. This update enables reporting of multipath devices and file system configured on multipath device mapper. |
| 32245 | Base0 Client, | 1. Added support to host DC database on a central non monitored volume. |
| 32234 | Base0 Client, | 1. Net app images for some languages have incorrect images for applet launch page |
| 31825 | Base0 Client, | 1. Linux 1-Touch GUI does not save the disk information after mapping is done |
| 31806 | Base0 Client, | 1. Laptop Backup install support for unix install |
| 31761 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, UNIX File System iDataAgent, Base0 Client, | 1. Fixed a condition where Install and Uninstall Software could fail without reason. 2. Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID. Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. 3. Unable to recall stub files after deleting the subclient. 4. Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store. 5. In certain cases, creation of storage policy pointing to a global deduplication policy fails. 6. Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console 7. SRM FLA Filters are not working when User Name or Group Name contains spaces. 8. Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. 9. NAS Backup is failing in round-robin scenario 10. Support for 1Touch ResponseFile configuration. 11. EvMgrC does not start after installing 9.0 SP1. |
| 31737 | UNIX File System iDataAgent, Base0 Client, | 1. Send Log Files operation from CommServ console when run on Unix clients does not gather galaxy log files. 2. Enhanced File System IDA to support archiving. 3. Enhanced File System IDA to support archiving. 4. EvMgrC failing to start on Mac OS X. |
| 31660 | Base0 Client, | 1. Enhancement to allow end users to browse via Web console 2. QSDK crashes on running multiple On Demand Backups from command line. |
| 31649 | UNIX File System iDataAgent, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. Job management from mobile devices. 2. Taskbar icon to show status of currently running backups and information about previous backups. |
| 31570 | Base0 Client, | 1. cvlaunchd leaks memory |
| 31499 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Backup might fail when too many jobs are run. 2. GXHSMService crashes during service shutdown or service restart. 3. Support unix intermediary media agents for pod cell imports. 4. Fixes folder deletion warning during deconfiguration of Dell DX6000 and other Object based cloud library mount path. 5. Automatic schedule support for laptop and desktop backup. |
| 31447 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1. Notify GUI Server Developers: Item [^10] missing from cvEncode. should not be visible in GUI. 2. Enhancement to support Dell DX Object Storage Platform and HDS HCP. Special Note: Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data. Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file. 3. Fixes occasional CvMountd crash on Unix MediaAgents. 4. Enhancement to allow exchange and sharepoint mining from VSA snaps 5. Support for laptop and desktop backups Fix for cluster upgrades for missing DB package rows. Support for Unix Turbo File System |
| 31425 | UNIX File System iDataAgent, Base0 Client, | 1. GXHSMService dumps core during service shutdown. 2. Enhanced File System IDA to support archiving. |
| 31329 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Enhancement to support Dell DX Object Storage Platform and HDS HCP. |
| 31327 | Base0 Client, | 1. Job Pending reason is not correct when client side dedup backup is
attempted to an upgraded 8.0 DDB.
2. Restores from re-encrypted copy may fail if the Auxilliary copy operation
was performed using a Unix MediaAgent with 'Optimize for concurrent LAN
Backups' option turned off.
3. Backup might fail when too many jobs are run.
4. Enables the "Variable Content Alignment" feature
5. SQL transaction log backup may fail with error "The control process for the
previous phase is still running. PID [ |
| 31283 | Base0 Client, | 1. Adding VCS specific scripts required for installation. |
| 31209 | UNIX File System iDataAgent, Base0 Client, | 1. GXHSMService crashes during recalls on a host with only VM (no PM) installed. 2. Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails. 3. Mount of the HDS snap is failing on partitioned device. 4. Snap reverts fixes for HDS Snap Engine. 5. Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) 6. Hide TSM admin passwords in logging. 7. JPR for incorrect login/password. 8. Unix Netapp NFS Snap protect support SILO DDB restore fails to restore DDB files. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 9) Integrated install and File System IDA with Unix VERITAS Cluster. 10) Enhanced File System IDA to support archiving. 11) SILO DDB backup fails to backup DDB files. 12. Discover job merge failure when XML files are collected with decoupled database capture. |
| 31175 | Base0 Client, | 1. Improves HPUX dedup backup performance. |
| 31140 | Base0 Client, | 1. Ability to run snap backup from qcommand followed by movement to tape job 2. qcommand.log may log passwords when using qoperation execscript command with password inputs 3. QSDK.log log login credentials at default logging level. |
| 31123 | Base0 Client, | 1. Installation of Filesystem Agent Fails on Freebsd 7/8 amd64 |
| 30926 | Base0 Client, | 1. QSDK crashes on running multiple On Demand Backups from command line. |
| 30527 | Base0 Client, Resource Pack, | 1. Two library were missing from CVGxBase0 package. |
Update No. |
Installed On |
Description |
| 34715 | Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, SAP for MaxDB, | 1. Sap/Oracle command line backup may fail intermitently. |
| 34714 | MediaAgent, | 1. Backup and reconstruction of Deduplication Database may fail. |
| 34681 | Base0 Client, Media Explorer, | 1. Restore Enhancements for VMware. 2. Documentum restores fail after installing SP1b 3. CVMA occasionally crashing on index cleanup |
| 34680 | Media Explorer, Base0 Client, | 1.) DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2.) Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3.) Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34661 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, MediaAgent, | 1. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 2. Supports Conversion of 8.0 version of DDB to 9.0 version. 3. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34646 | MediaAgent, | 1. When CS and MA are different machines, Tape Catalog job may cause a CVMountd crash. 2. Robo offline source CS import via MA may fail to copy dumps to GRC cell. 3. Enhancement for Dell disk array configuration. |
| 34639 | Documentum iDataAgent, Oracle iDataAgent, | 1. Oracle control file restore fails with error "Database not in STARTED mode". |
| 34636 | Documentum iDataAgent, DB2 iDataAgent, | 1. DB2 log manager stops archiving logs when previous Log retrieval fails. 2. DB2 Backup fails when performance satistics is enabled with registry key. |
| 34610 | MediaAgent, | 1. Customer backs up their data using a Unix MediaAgent. Customer content indexes data using a Windows MediaAgent. Customer does a compliance search, selects a file to restore and this kicks off a restore. This restore completes successfully, the data ends up in the location where it's supposed to, but the compliance search gui reports the operation failed with an X in a red circle. In short everything seems to work, but it's reporting failure. 2. Power restores for NAS data fail if a firewall is active between the webserver and the commserver. 3. Restore to windows of files located in very deep directories fail if the full path of the filer exceeds 256 characters. 4. Content Indexing jobs for large NetApp backups are failing. |
| 34585 | Base0 Client, Media Explorer, UNIX File System iDataAgent, File Archiver for UNIX Agent, | 1. DC Support with Turbo FS Agent. 2. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 3. SILO backup job goes to pending due to scan failure. 4. Directories specified in the exceptions list not being backed up. 5. Failed files are not added into next incremental backup. 6. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 7. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 8. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Base0 Client, Media Explorer, | 1. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Base0 Client, | 1. Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2. CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34542 | Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, | 1. Media Agents goes offline intermittently due to registry permission issues. |
| 34538 | Base0 Client, Resource Pack, Media Explorer, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. 2. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 3. DB2 snap multistream restores may get stuck trying to detect SCSI devices 4. Snap Protect backup fails when HDLM multipath is configured on Linux. 5. Adding support for agile addressing on HP-UX |
| 34526 | Media Explorer, Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34512 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, UNIX File System iDataAgent, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34485 | UNIX File System iDataAgent, MediaAgent, File Archiver for UNIX Agent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, DB2 iDataAgent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34473 | Media Explorer, MediaAgent, | 1. Restore from NAS auxilliary copy may fail with "no more chunks in last archive file, ending restore." 2. Auxilliary copy for NAS direct attach tape drives using hardware encryption fails with an error reading from the source tape. 3. 1). Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table". 2). Auxcopy may fail with error "Cannot get encryption keys for archive file NNNN", if the source copy is done with encryption and Store-Priming operations. 3). After Commcell Migration, Restore/Auxilliary copy of the migrated data on a local commcell policy (Local Mount Path) may fail. |
| 34451 | Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34413 | Base0 Client, | 1. Failure of cvsnap when device mounted from a solaris local zone 2. Adding support for native VxVM snapshots on Solaris. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Predictor for Continuous Data Replicator, Resource Pack, Base0 Client, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Simpana startup script failure 2. Simpana startup script failure 3. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 4. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 5. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, Base0 Client, | 1.. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2.. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3.. Firewall related binaries are not packaged for 64bit platforms 4.. Tunnels may not failover in cluster firewall environment |
| 34380 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Fix for updating baseline of SP1a on GUI 13. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 14. Fix for removing numbered update, that has an update number partially matching with another package 15.. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 16.. Partial enhancements for RemoveUpdates to expire old updates. 17.. Added support in update installer to wait for sidb process. |
| 34352 | Base0 Client, Media Explorer, | 1.. Snap mount operation failing. 2.. Snap operation failing on multipath devices on Linux platform. 3.. Snap mount failing on SuSE 11 4.. Unmount failing during Oracle RMAN Snap to tape backup. 5.. Mount of SAP/Oracle backup volumes failing. 6.. Snap is failing on Linux when file system mounted using device name /dev/dm-*. |
| 34327 | DB2 iDataAgent, SAP for MaxDB, Continuous Data Replicator, UNIX File System iDataAgent, File Archiver for UNIX Agent, Documentum iDataAgent, SAP for Oracle, Oracle iDataAgent, Base0 Client, Media Explorer, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. Utilize multiple streams during snap backup copy and restore from snap. 4. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 5. Archiver fails in Stubbing phase. 6. Active Directory browse fails to show items after running synthetic full. 7.. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 8.. Support for switch database mode GUI option for Oracle snap restores 9.. SAP restore Job progress fix for multi-stream restores |
| 34317 | Base0 Client, Media Explorer, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34288 | MediaAgent, | 1. Snap creation may fail for HP EVA based SnapProtection feature, if source volume UUID and WWN values are different. 2. Unmap of the snapshot/clone may fail if the host group with multiple FC initiator ports configured on HP EVA or LSI storage array. 3. iSCSI support for HPEVA and LSI arrays. 4. Exchange Database snap protect job may fail in copy operation on HP EVA or LSI array. |
| 34275 | Documentum iDataAgent, Base0 Client, Oracle iDataAgent, SAP for Oracle, Media Explorer, File Archiver for UNIX Agent, | 1. Image File level restore fails on 32/64-MA if File System is not installed on the MA |
| 34274 | File Archiver for UNIX Agent, | 1. Errors reported by cxfs_upgrade are now logged and will not cause the archive job to fail after an upgrade. 2. cxfs_upgrade -f option added to allow manual upgrade of individual files in the case of failures. 3. Minor fix in usage message. |
| 34187 | Data Classification Enabler, | 1. Communication to DataClassification Service fails when firewall is configured |
| 34108 | RootOfCPUFolder, | 1.. Added support for recording unix group/other user's access 2.. Added support for 64bit installs via reduced/native packages 3.. Custom package creator to not show all OEM brands. |
| 34100 | Base0 Client, Media Explorer, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34097 | DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, File Archiver for UNIX Agent, MediaAgent, Base0 Client, Pre-PostInstall, Resource Pack, Predictor for Continuous Data Replicator, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 2. DB2 Incremental backup throughput is affected by archive logs inclusion in backup image. Special Note: Please set the following registry key to Yes under Db2Agent/.properties on DB2 client machine. SKIPLOGSINBKPIMG Yes 3. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 4. FileSystem Backup Jobs pending with error code [82:156] |
| 34092 | MediaAgent, Documentum iDataAgent, SAP for Oracle, Oracle iDataAgent, Base0 Client, Media Explorer, | 1. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get array info. Please enter array info from Array Management" 2. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 3. Snapprotect should pick pre-established bcv mirrors and incrementally establish before splitting the bcv 4. Registry hook to use pre-masked devices during mounting and leave them masked during unmounting for EMC symmetrix Special Note: On proxy machine registry key "nDisableConfigChange" when present under "iDataAgent" and set to 1 uses pre masked BCV for mounting. 5. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 6. Snap backups would fail when symmetrix device numbers for source disks exceeds 999 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 9. Mount for raw device may fail on AIX and Sun due to conversion. 10. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 11. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 12. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 13. Support SnapProtect for VMAX Symmetrix Array. |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Base0 Client, Media Explorer, | 1. Restores may fail from Variable Content Alignment enabled backups. 2. Dedupe not working for Synthetic Full backups 3. DB2 Backup fails with library load error on AIX. |
| 34007 | MediaAgent, | 1. Fixes issue where application data size displayed is much greater than actual backed up data size, when there are lots of sparse files or Archiver stubs in subclient |
| 33987 | Continuous Data Replicator, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33984 | Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33939 | Sybase iDataAgent, | 1. Support for Sybase backup and restores in a firewalled environment |
| 33906 | MediaAgent, Base0 Client, Resource Pack, Predictor for Continuous Data Replicator, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Enhancement to allow marking backup files as read only for cloud devices that supports retention locking. 2. Enhancement to support Dell DX Object Storage Platform and HDS HCP. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. DASH Auxilliary Copy job may go to pending with job pending reason: Cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported. 8. Content Indexing job read failure from a chunk created by a suspended backup job on a Hardware single instance target. 9. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 10. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. 11. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. 12. Prunable data on disk associated with DeDup storage policy may not be removed due to registry lookup failure. |
| 33878 | Base0 Client, Media Explorer, SAP for Oracle, | 1. Special characters in the data cause SRM Data Collection jobs to fail. 2. Enhancement for VSA restore changes. Support for additional parameters during restore. 3. End User Search capability for Outlook Add-In Users 4. Read Ahead NAS backup options may not be available after upgrade to 9.0 5. Store additional metadata in index for virtual server agents 6. Capacity Usage table is currently not available in License Summary Report 7. Protected files report show incorrect file size. 8. Virtual Server Agent browse may fail when number of volumes in a virtual machine is greater than 20 9. Exchange Mailbox Archiver stub recalls may fail if user's smtp address has a case change in the middle of a cycle. 10. Browse fails after upgrading Media agent to 9.0 11. Commcell console does not allow selection of restore only exchange MB agents 12. Server side changes for enhanced VSA restores. |
| 33737 | Data Classification Enabler, | 1. Incremental backups using DC on HP-UX backup all the data. Incremental FS scans with reference time less than the DC DB creation time should fall back to regular scan. 2. UNIX DC install will fail if FS IDA is already installed and patched to SP1a. |
| 33672 | MediaAgent, Base0 Client, Media Explorer, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33615 | Base0 Client, Media Explorer, | 1. Backup of Image Level on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow 2. CVD crashes when I try to detect Volumes with Volume Explorer. The issue happens wnen there is an extra folder under /dev/rdsk. 3. Failure to detect all devices using volume explorer on redhat6.0. |
| 33585 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. CVD may crash on a busy firewalled setup 2. Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels. 3.) sBindToInterface registry setting didn't work with hostnames (only with IPs) 4.) Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks 5.) Persistent tunnels were prebinding to the wrong IP on roaming laptops 6. Log browse across firewalls may hang if SSL is in use 7. CVD trying to do name to IP resolution every second 8. Log browse across firewalls may hang if SSL is in use 9. Backups through firewall may become unresponsive 10. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 11. Fix for CVD service not coming up sometimes. 12. Automatic scheduled jobs would not run after failing to get the job status. 13. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33569 | Base0 Client, | 1. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 2. Fix for copying servicepack.ini of unix SP 3. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 4. Copy software fails to update installer files. 5. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33486 | MediaAgent, | 1. Backup Copy of Virtual Server Snap fails in mounting of snap |
| 33443 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33411 | UNIX File System iDataAgent, 1-Touch Server, | 1. AIX 1-Touch backup failing on a systems with disabled Volume Groups.
2. AIX 1-Touch backup failing when NIM network is used with Gigabit
Ethernet-SX PCI-X Adapter
Special Note:
The 1-touch backup will fail when one or more in-active volume is
present. To get successful 1-Touch backup, use the following registry to
skip the inactive volume groups.
Registry path :
/etc/CommVaultRegistry/Galaxy/ |
| 33406 | Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Command line support for creating VSA subclient 3. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 4. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 5. Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | DB2 iDataAgent, File Archiver for UNIX Agent, MediaAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. DB2 Snap Backup fails while accessing online logs files. 4. CvMountd may crash if the network is slow 5. Utilize multiple streams during restore from Snap and Sanp Backup Copy. 6. Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. 7. Random file-level restore failures from Image backups on AIX. |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33205 | External Data Connector, | 1. VSA Mining client side changes 2. Adds support for VMware Application Level quiescing when using ESX 4.1 and Windows 2008 r2 3. Sometimes discovery process is failing during processing magnetic libraries list |
| 33151 | Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33072 | RootOfCPUFolder, | 1. 1.custom package creation for oracle/db2 ida's on s390 platform 2. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | MediaAgent, Media Explorer, Base0 Client, SAP for Oracle, | 1. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 2. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 3. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 4.) SAP datafile restores from Commcell GUI fails 5.) SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 6.) Oracle Snap Restore fails if incremental tape backup is run after the Snap. 7.) Snap revert operation failing on Solaris client when mount point is in root directory. 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32980 | MediaAgent, | 1. Hardware snap creation will get failed if more than 2 filers configured in array management screen. Special Note: In New XCLI installation on VSA proxy scenario use below registry key to avoid reboot to set XCLI tools path. "'iDataAgent\XCLI_BINARY_LOCATION'" and set the value to install path of xcli example: "C:\Program Files (x86)\XIV\GUI10" |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32951 | Base0 Client, Media Explorer, MediaAgent, | 1. Recalls on Exchange Mailbox Archiver stubs fail after upgrading CC and MA from 8.0 to 9.0 2. Index restore crashes during virtual server incremental backups 3. Fix for Virtual server iDA point in time restores from snap backups 4. createIndex sometimes fails with index moved between different MA machine architectures 5. image level iDA file browse fails on sparc solaris 64 bit media agent 6. Browse enhancements for exchange mailbox archiver agent to show all stubs within a given time range. 7. Archiver jobs fails after upgrading CS and MA to 9.0 and when data was erased through Browse prior to upgrade. 8. Initial backups might fail going to upgraded MA from 8.0 to 9.0 with grid store enabled and index cache server configuration. |
| 32949 | Base0 Client, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32945 | Base0 Client, Media Explorer, MediaAgent, | 1. DDB reconstruction fails. 2. DDB simulation tool hangs when multiple simulations are attempted in parallel on the same machine. 3. NAS iDA backups to a tape drive on a NetApp file server are failing in the archive index phase with an error indicating "an internal software error occurred". Failure happens when using ONTAP 7.3.3 and IPv6 is not configured on the MediaAgent. 4. Dedup backups to dedup storage policy may stop working with the error: "Failed to start a transaction" 5. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 6. Auxcopy process may crash intermittently when dedup read ahead feature is active 7. DeDup Reconstruction job may fail in the [Add Records] phase. 8. Auxiliary Copy operation from DeDup enabled storage policy copy may fail if look ahead read is enabled. 9. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. |
| 32936 | Continuous Data Replicator, Media Explorer, Base0 Client, | 1.. Added NFS Snap Protect support for Solaris Local Zone. 2.. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 3.. When mounting a snap do not guarantee space. 4. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32909 | Base0 Client, | 1. Enable HDS ShadowImage differential resynch for HDS SnapProtect. Special Note: To enable the fix in this update, create the following DWORD value under the EventManager section of the Client registry: CVHDS_USE_DELETED_SHADOWIMAGE and set the value to 1. 2. Unmount is reported as failed from HDS Snap Engine even if it is successful. Special Note: Stop the services before applying this update |
| 32719 | External Data Connector, | 1. Discovered Netbackup exported media are not shown in the media information report 2. Support Pre-deployment survey for external data collector. Special Note: Refer to online document External Data Connector Pre-Deployment Survey. 3. Support for TSM version 6.1.3 4. Fix for Fastpass discovery job running CVForeignHandler.exe module at 100% CPU. 5. Vsa snap mining provider and mining changes. 6. Support for TSM 6.2. 7. Support for the migration of TSM Enhanced Schedules. 8. Support for Tsm output files with unix format. |
| 32695 | DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Base0 Client, Media Explorer, | 1. MySql restore fails with library load error 2. Log Restore by LSN range fails on HP-UX IA64 3. SAP/Oracle restore fails from tape copy of snap data. |
| 32638 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, UNIX File System iDataAgent, | 1. archiveIndex not starting on MAs Incremental backups fail in ArchiveIndex phase when there is nothing to backup. 2. Ifind goes to pending with loss of control for lotus Idas on linux-x64. 3. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 4. Laptop backup progress indicator isn't showing throughput or amount of transferred data. 5. Adds File Archiver support for new Ibrix FS. 6.) More information displayed on backup tray utility 7.) Name of the current file wasn't shown in backup tray utility on UNIX 8.) Total file count was not set on UNIX 9.) Final job status was not passed to backup tray utility 10.) Reason why new jobs cannot be scheduled was not passed to backup tray utility |
| 32634 | File System Filter Driver, | 1. DC needs access to some of the CDR ioctls 2. DC DB may become out of sync in case of file resizes or stubbing/unstubbing. 3. Unix atime may become out of sync in DC DB after a stub file backup. |
| 32539 | Base0 Client, | 1. Fibre Channel card not detected on Solaris OS setup with multiple Fibre Channel cards. |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32384 | Data Classification Enabler, | 1. DC Performance Enhancements Special Note: This update will rebuild DC Databases for all volumes linux_9.0.0B84_31906 and hp_9.0.0B84_31907 are pre-requisites |
| 32316 | SRM UNIX File System Agent, UNIX File System iDataAgent, Base0 Client, | 1. NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" 2. Unix File system backup is slow. 3. The UNIX File System backup will not backup data of a symbolic link when it is a sub-client, the "Expand symbolic links of subclient content" is checked, the symbolic link located in the root directory and it is linked with a relative path started with non-path delimiter symbols ('.' or '/'). 4. This update enables reporting of multipath devices and file system configured on multipath device mapper. |
| 32297 | MediaAgent, | 1. New media are not detected after adding the media to the magazine for some libraries. |
| 32245 | Base0 Client, | 1. Added support to host DC database on a central non monitored volume. |
| 32234 | Base0 Client, | 1. Net app images for some languages have incorrect images for applet launch page |
| 32196 | Continuous Data Replicator, | 1. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. 2. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. Fix for installing CDR on sol2.9 |
| 32117 | Informix iDataAgent, Sybase iDataAgent, DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. DB2 agent restores all log files with the matching sequence number. 2. Oracle, DB2, Informix and Sybase Backup/Recovery support for Dedupe with Variable content alignment(VCA). |
| 32031 | MySQL iDataAgent, | 1. Failure in recurring log restore when only single db is restored. |
| 31870 | Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Oracle offline backups with Lightsout script fails in csh environment. |
| 31868 | Media Explorer, MediaAgent, Continuous Data Replicator, Base0 Client, | 1. CVMA or CVFSSnap may crash while running clariion backups. 2. CVMA crashes when the registry key SYMAPI_HOME_DIR is not created in Unix platforms. 3. HDS Snap cleanup fails with the error "Replication group not found". 4. Clariion snap and clone jobs do not use the device mapper pseudo device path when Linux native MPIO is installed. 5. Clariion Snap/Clone jobs may go to pending with error "Failed to get device array info from device path" 6. After running SRM Analysis on NDMP client, some of the files with no extension are not reported properly by SRM Reports. 7. During a Nas backup, if the Job Manager service goes down for some reason, nasbackup continues backing up data. nasBackup should detect this condition and fail the backup phase with a relevant pending reason. 8. XIV snapshot mount operation on a VM (hosted on ESX server) fails. 9. Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete. 10. Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 11. VmWare backup copy job fails with error "Failed to get device list" while mounting Clariion Disk 12. Added snap engine support for LSI OEM Disk Arrays with VMWare. 13. Enhancement to support VMWare for HDS snap engine 14. Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit." 15. Unable to run successful VSA SnapProtect backups in some cases when the ESX server has huge number of disks. 16. Added required support in addition to others for NAS Snap Protect. 17. Add support for Snap Protect to the NetApp NAS iDA. |
| 31825 | Base0 Client, | 1. Linux 1-Touch GUI does not save the disk information after mapping is done |
| 31806 | Base0 Client, | 1. Laptop Backup install support for unix install |
| 31761 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, DB2 iDataAgent, UNIX File System iDataAgent, File Archiver for UNIX Agent, Base0 Client, Media Explorer, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Fixed a condition where Install and Uninstall Software could fail without reason. 2. Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID. Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. 3.. Unable to recall stub files after deleting the subclient. 4.. Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store. 5.. In certain cases, creation of storage policy pointing to a global deduplication policy fails. 6. Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console 7. SRM FLA Filters are not working when User Name or Group Name contains spaces. 8. Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. 9. NAS Backup is failing in round-robin scenario 10. Stubbing fails during Turbo FS incremental job if files were renamed or deleted. 11. Support for 1Touch ResponseFile configuration. 12. EvMgrC does not start after installing 9.0 SP1. |
| 31737 | MediaAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, DB2 iDataAgent, Media Explorer, UNIX File System iDataAgent, File Archiver for UNIX Agent, Base0 Client, | 1. Send Log Files operation from CommServ console when run on Unix clients does not gather galaxy log files. 2. Enhanced File System IDA to support archiving. 3. Enhanced File System IDA to support archiving. 4. EvMgrC failing to start on Mac OS X. |
| 31679 | UNIX File System iDataAgent, 1-Touch Server, | 1. Linux 1-Touch backup fails on systems having multipath devices configured. Special Note: 1] Install this update on the client before taking 1-Touch backups (required only on systems containinng multipath disks) 2] Use the bootcd during restore that contains this update. 2. AIX 1-Touch backup job is failing with message "The MAC address is not set or incorrect in NIM Master for this client." Special Note: The standard Ethernet Network adapter must be available on the 1-Touch client machine and configured to be able access 1-Touch boot server (NIM Master machine). All EtherChannel adapters must be configured with interface number higher than any standard Ethernet Network adapter. The NIM Master must be configured with Network resource for network of that standard Ethernet Network adapter on NIM Client machine. After 1-Touch recovery the machine will be reboot to finalize the configuration. 3. Added new YCP GUI support. 4. Enhanced 1-Touch recovery via response file created during the backup. |
| 31660 | Base0 Client, Media Explorer, | 1. Enhancement to allow end users to browse via Web console 2. QSDK crashes on running multiple On Demand Backups from command line. |
| 31649 | UNIX File System iDataAgent, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. Job management from mobile devices. 2. Taskbar icon to show status of currently running backups and information about previous backups. |
| 31570 | Base0 Client, | 1. cvlaunchd leaks memory |
| 31566 | Base0 Client, | 1. SDR may restart processing from the beginning in case of network errors instead of from the point where the error occurred. |
| 31499 | SAP for Oracle, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Predictor for Continuous Data Replicator, MediaAgent, | 1. Backup might fail when too many jobs are run. 2.. GXHSMService crashes during service shutdown or service restart. 3.. Support unix intermediary media agents for pod cell imports. 4.. Fixes folder deletion warning during deconfiguration of Dell DX6000 and other Object based cloud library mount path. 5. Automatic schedule support for laptop and desktop backup. |
| 31447 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, Media Explorer, | 1. Fixes occasional CvMountd crash on Unix MediaAgents. 2. Enhancement to allow exchange and sharepoint mining from VSA snaps 3. Support for laptop and desktop backups Fix for cluster upgrades for missing DB package rows. Support for Unix Turbo File System |
| 31444 | MediaAgent, Documentum iDataAgent, File Archiver for UNIX Agent, Base0 Client, Oracle iDataAgent, Media Explorer, SAP for Oracle, | 1. Backups might fail for certain iDAs when staging index cache location is enabled. 2. PostgreSQL iDA Table level restores are failing 3. UpdateIndex might fail with error "Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover" when several backup jobs start running simultaneously. 4. Backup job might fail with error "Loss of control process archiveIndex.exe" when several backup jobs start running simultaneously. 5. Fix for browse failure when a job fails over between multiple datapaths and Index Cache Server is configured. 6. To remove use exact index option and for the system to automatically choose what index to use. 7. TurboFS backups and restores sometimes fail. |
| 31425 | UNIX File System iDataAgent, Base0 Client, File Archiver for UNIX Agent, | 1. GXHSMService dumps core during service shutdown. 2. Enhanced File System IDA to support archiving. |
| 31327 | Media Explorer, Base0 Client, | 1. Job Pending reason is not correct when client side dedup backup is
attempted to an upgraded 8.0 DDB.
2. Restores from re-encrypted copy may fail if the Auxilliary copy operation
was performed using a Unix MediaAgent with 'Optimize for concurrent LAN
Backups' option turned off.
3. Backup might fail when too many jobs are run.
4. Enables the "Variable Content Alignment" feature
5. SQL transaction log backup may fail with error "The control process for the
previous phase is still running. PID [ |
| 31283 | Base0 Client, | 1. Adding VCS specific scripts required for installation. |
| 31209 | UNIX File System iDataAgent, External Data Connector, DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Base0 Client, Media Explorer, MySQL iDataAgent, | 1. Fixes CVForeignHandler.exe crash during EDC discovery phase. 2. GXHSMService crashes during recalls on a host with only VM (no PM) installed. 3. EDC Discovery on 5.1 NBU server (hpux) failed with error "Netbackup services are not running". 4. Sometimes Discovery job fails on machines where date format is different from mm/dd/yyyy or media server is not client on the Master server Special Note: This update MUST be installed along with update with form id 07678 5. EDC support for IBM TSM 6. File permissions on ORASBT.log is getting reset on restricted environments. Special Note: set registry key sSKIPRESETORASBTLOGPERMS to Yes under OracleAgent/.properties. 7.. Discover job merge failure when XML files are collected with decoupled database capture. 8.. Hide TSM admin passwords in logging. 9.. JPR for incorrect login/password. 10.. Unix Netapp NFS Snap protect support SILO DDB restore fails to restore DDB files. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 11.. Support for decoupled method of EDC TSM discovery using outputs of TSM commands run. 12. Integrated install and File System IDA with Unix VERITAS Cluster. 13.) Enhanced File System IDA to support archiving. 14.) SILO DDB backup fails to backup DDB files. |
| 31175 | Base0 Client, Media Explorer, | 1. Improves HPUX dedup backup performance. |
| 31146 | Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, MediaAgent, Media Explorer, | 1. Silo Archival job may fail with missing chunk error. 2. Data size in Silo shown in Storage Policy Copy Properties and Storage Policy Report does not include the size of volumes processed by Silo Disk Cleanup. 3. Size of Dedupe DB is shown incorrectly in the Storage Policy report. 4. New option in Commcell configuration report to show index cache content information Special Note: This update needs to be installed with the GUI update form 07496 5. Notify GUI Server Developers: Item [^10] missing from cvEncode. should not be visible in GUI. 6. Restore/Auxilliary Copy jobs may not progress when Silo Retrieval job gets interrupted. 7. SILO Archived DDB is not removed from disk. 8. Jobs may fail to query CommServe Version string from Media Agent when CommServe is under heavy load. 9. Enhancement to support Dell DX Object Storage Platform and HDS HCP. Special Note: Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data. Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file. |
| 31140 | Base0 Client, | 1. Ability to run snap backup from qcommand followed by movement to tape job 2. qcommand.log may log passwords when using qoperation execscript command with password inputs 3. QSDK.log log login credentials at default logging level. |
| 31123 | Base0 Client, | 1. Installation of Filesystem Agent Fails on Freebsd 7/8 amd64 |
| 31094 | MySQL iDataAgent, | 1. MySQL backup goes into pending state |
| 30962 | MediaAgent, Base0 Client, Media Explorer, | 1. Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails. 2. Mount of the HDS snap is failing on partitioned device. 3. Snap reverts fixes for HDS Snap Engine. 4. Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) |
| 30931 | MySQL iDataAgent, | 1. Invalid bin log (data) path specified in Instance creation causes data loss. |
| 30926 | Base0 Client, Media Explorer, | 1. QSDK crashes on running multiple On Demand Backups from command line. |
| 30902 | MySQL iDataAgent, | 1. Database names with special characters have problems in backup/restore operations. Special Note: 1. We don't support database names containing single quotes. |
| 30870 | Sybase iDataAgent, | 1. Sybase database discovery hangs for instance with many databases. |
| 30660 | SAP for MaxDB, Continuous Data Replicator, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Backup with Flash Recovery Area fails intermittently. 2. Mark Restore job status to pending if encountered any errors. 3. Oracle 11GR2 Table Restore fails with Tablespace not self contained error. |
| 30641 | MediaAgent, | 1. ScanScsiTool was missing from 32-bit Media Agent Package on Linux. |
| 30527 | Base0 Client, Resource Pack, Media Explorer, | 1. Two library were missing from CVGxBase0 package. |
Update No. |
Installed On |
Description |
| 34715 | Documentum iDataAgent, SAP for MaxDB, SAP for Oracle, Oracle iDataAgent, | 1. Sap/Oracle command line backup fails. |
| 34714 | MediaAgent, | 1. Backup and reconstruction of Deduplication Database may fail. |
| 34713 | CommCell Console, | 1. Browse backup data may not show the drive names on the table |
| 34691 | CommCell Console, | 1. Skip answers and continue "Import From Pod Cell" job if source CS is offline. 2. Resubmission of import job does not preserve the option consume license. 3. Resubmission of import job fails with error Validation of dump directory failed. 4. For ROBO, even if the remote Commserve is online, the CCM job is forced to be saved as script rather than registering the schedule on the remote Commserve directly. 5. Billing configuration does not retain settings and Commcell Console freezes 6. "Find" option in "Erase Data by Browsing" feature of Exchange mailbox/public folder agents shows find window in minimized state. It will be always on the task manager unless we close the Erase Data by Browsing window. 7. Erase data by browse rollback. 8. 1.While creating a new FS subclient, the SnapProtect checkbox in the Snap tab is checked by default. 2.Getting error message when trying to create storage policy using the existing global deduplication storage policy. 9. GUI Hangs when Last Sunday Monthly schedule is selected. 10. Unable to view restore schedule. |
| 34681 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, Media Explorer, | 1. Restore Enhancements for VMware. 2. Documentum restores fail after installing SP1b 3. CVMA occasionally crashing on index cleanup |
| 34680 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Media Explorer, Base0 Client, | 1.) DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2.) Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3.) Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34675 | MediaAgent, | 1. Add Snap Protect support for Equallogic having a seperate interface for management and data. Special Note: If a dedicated management network interface is configured on Equallogic array, enter the management IP address in "Name" field when adding the array in array management. Otherwise this field will be left blank. The control host field will be used for Data interface as it is used today. |
| 34661 | Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, MediaAgent, | 1. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 2. Supports Conversion of 8.0 version of DDB to 9.0 version. 3.. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34646 | MediaAgent, | 1. When CS and MA are different machines, Tape Catalog job may cause a CVMountd crash. 2. Robo offline source CS import via MA may fail to copy dumps to GRC cell. 3. Enhancement for Dell disk array configuration. |
| 34639 | Documentum iDataAgent, Oracle iDataAgent, | 1. Oracle control file restore fails with error "Database not in STARTED mode". |
| 34636 | Documentum iDataAgent, DB2 iDataAgent, | 1. DB2 log manager stops archiving logs when previous Log retrieval fails. 2. DB2 Backup fails when performance satistics is enabled with registry key. |
| 34610 | File System NDMP Restore Enabler, MediaAgent, | 1. Customer backs up their data using a Unix MediaAgent. Customer content indexes data using a Windows MediaAgent. Customer does a compliance search, selects a file to restore and this kicks off a restore. This restore completes successfully, the data ends up in the location where it's supposed to, but the compliance search gui reports the operation failed with an X in a red circle. In short everything seems to work, but it's reporting failure. 2.. Power restores for NAS data fail if a firewall is active between the webserver and the commserver. 3.. Restore to windows of files located in very deep directories fail if the full path of the filer exceeds 256 characters. 4.. Content Indexing jobs for large NetApp backups are failing. |
| 34599 | CommCell Console, | 1. Add Snap Protect support for Equallogic Arrays that have a separate interface for management and data. 2. Add multiple Data Readers support for NAS Subclients when SNAP is Enabled. Special Note: 1. If a dedicated management network interface is configured on Equallogic array, enter the management IP address in "Name" field when adding the array in array management. Otherwise this field should be left blank. The control host field will be used for Data interface as it is used today. |
| 34585 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, File Archiver for UNIX Agent, UNIX File System iDataAgent, Content Store, | 1. DC Support with Turbo FS Agent. 2. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 3. SILO backup job goes to pending due to scan failure. 4. Directories specified in the exceptions list not being backed up. 5. Failed files are not added into next incremental backup. 6. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 7. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 8. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2.. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2. CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34542 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Predictor for Continuous Data Replicator, CommCell Console, Media Explorer, CommNet Browser, Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Media Agents goes offline intermittently due to registry permission issues. |
| 34538 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, Resource Pack, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. 2. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 3. DB2 snap multistream restores may get stuck trying to detect SCSI devices 4. Snap Protect backup fails when HDLM multipath is configured on Linux. 5.) Adding support for agile addressing on HP-UX |
| 34526 | Media Explorer, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3.. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34512 | Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, UNIX File System iDataAgent, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34504 | Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, | 1. Received Time show 1970-1-1 8:00:00 in web search GUI when displaying notes mail 2. Restore of Database by Lotus Notes Document iDataAgent corrupts the database on Solaris and AIX platforms 3. Emails are not restored in Inbox on Linux platform |
| 34488 | CommCell Console, | 1. Remove GUI Options for Data Classification for Exchange 2. Unable to submit Restore Job from EZ Operations wizard 3. Unable to convert a Schedule to Automatic Schedule 4. 1.Chinese character can not be used as schedule name. 2.Schedule configuration which was created with chinese character name was lost after creating a schedule with english name. 5. Enforced minimum throttling value to 256 Kbps 6.. Browse for Content on AIX and Solaris file system agents show folders like "Desktop, Documents, Movies, Pictures, Videos" 7. Express install is not showing eval token licenses correctly in 9.0 8. For VMware, File level and disk level restore should show Linux clients also part of destination clients. |
| 34485 | Image Level iDataAgent, Image Level ProxyHost iDataAgent, File Archiver for UNIX Agent, MediaAgent, UNIX File System iDataAgent, Oracle iDataAgent, DB2 iDataAgent, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34473 | Media Explorer, MediaAgent, | 1. Restore from NAS auxilliary copy may fail with "no more chunks in last archive file, ending restore." 2. Auxilliary copy for NAS direct attach tape drives using hardware encryption fails with an error reading from the source tape. 3. 1). Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table". 2). Auxcopy may fail with error "Cannot get encryption keys for archive file NNNN", if the source copy is done with encryption and Store-Priming operations. 3). After Commcell Migration, Restore/Auxilliary copy of the migrated data on a local commcell policy (Local Mount Path) may fail. |
| 34451 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34413 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Failure of cvsnap when device mounted from a solaris local zone 2. Adding support for native VxVM snapshots on Solaris. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Predictor for Continuous Data Replicator, Resource Pack, Base0 Client, Media Explorer, CommNet Browser, Resource Pack Internal, Resource Pack Limited, CommCell Console, | 1. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 2. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Predictor for Continuous Data Replicator, CommCell Console, Media Explorer, CommNet Browser, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, | 1.. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2.. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3.. Firewall related binaries are not packaged for 64bit platforms 4.. Tunnels may not failover in cluster firewall environment |
| 34380 | Predictor for Continuous Data Replicator, CommNet Browser, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Fix for updating baseline of SP1a on GUI 13. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 14. Fix for removing numbered update, that has an update number partially matching with another package 15.. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 16.. Partial enhancements for RemoveUpdates to expire old updates. 17.. Added support in update installer to wait for sidb process. |
| 34352 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1.. Snap mount operation failing. 2.. Snap operation failing on multipath devices on Linux platform. 3.. Snap mount failing on SuSE 11 4.. Unmount failing during Oracle RMAN Snap to tape backup. 5.. Mount of SAP/Oracle backup volumes failing. 6.. Snap is failing on Linux when file system mounted using device name /dev/dm-*. |
| 34351 | CommNet Browser, CommCell Console, | 1. Default provisioning policy in the Provisioning tab for SP copy properties needs to be removed and Sna-RAID-DP to be selected by default. 2. While New Snapshot copy creation, the source copy panel is disable and nothing is selected. This doesn't let the user save any changes to the copy. 3. If user changes Catalog Profile settings on media agent properties, the user should be warned about copying existed indices to the index cache server. 4. Enhancement 5. Restore Enhancements for VMware. 6. Changed text to "Default time range for Outlook Add-In Find and Recover" in Browse Recovery Options dialog in Control Panel 7. Commcell firewall configuration may get reset when properties are changed |
| 34327 | DB2 iDataAgent, Documentum iDataAgent, SAP for MaxDB, Continuous Data Replicator, SAP for Oracle, File Archiver for UNIX Agent, UNIX File System iDataAgent, Oracle iDataAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. Utilize multiple streams during snap backup copy and restore from snap. 4. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 5. Archiver fails in Stubbing phase. 6. Active Directory browse fails to show items after running synthetic full. 7.. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 8.. Support for switch database mode GUI option for Oracle snap restores 9.. SAP restore Job progress fix for multi-stream restores |
| 34317 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34288 | MediaAgent, | 1. Snap creation may fail for HP EVA based SnapProtection feature, if source volume UUID and WWN values are different. 2. Unmap of the snapshot/clone may fail if the host group with multiple FC initiator ports configured on HP EVA or LSI storage array. 3. iSCSI support for HPEVA and LSI arrays. 4. Exchange Database snap protect job may fail in copy operation on HP EVA or LSI array. |
| 34275 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, File Archiver for UNIX Agent, SAP for Oracle, Media Explorer, Base0 Client, Oracle iDataAgent, | 1. Image File level restore fails on 32/64-MA if File System is not installed on the MA |
| 34274 | File Archiver for UNIX Agent, | 1. Errors reported by cxfs_upgrade are now logged and will not cause the archive job to fail after an upgrade. 2. cxfs_upgrade -f option added to allow manual upgrade of individual files in the case of failures. 3. Minor fix in usage message. |
| 34266 | CommCell Console, | 1. Install Updates from CS level does not contain clients that are in the restore only/released state 2. SAP Oracle and Oracle: Open DB is ignored in case of Partial restores SAP Oracle:For Control file only restore does not need Data or Log to be selected. Oracle RAC: Atleaset one instance for restore needs to be selected by entering non-zero value for Streams 3. Unable to create SRM Reports Schedule Policy due to "Invalid Schedule Pattern" error. 4. Laptop Backup Web UI 5. MA side deduplication option is not saving at instance window for SAP Maxdb and Informix 6. Job controller not refreshing in Commcell Console 7. Enhancement to add a link on the Capacity screen to point to Books Online license administration. 8. "Next Job On" column shows incorrect value for automatic schedules and schedule policies 9. Enhancement to optionally skip catalog phase for snap backup 10. Enhancement to default SQL agent settings for higher performance |
| 34187 | Data Classification Enabler, | 1. Communication to DataClassification Service fails when firewall is configured |
| 34176 | CommNet Browser, | 1. In scheduled Load Report the legend sometimes overlaps the chart in PDF format. 2. Localization fixes 3. After upgrading to 9.0 CommNet, sometimes Data Protection Activity and Data Growth report schedules fail to run. 4. Updated CommNet Browser Japanese translations. 5. In CommNet Browser, the User Preference setting of Timeout Enabled is not getting saved. 6. When trying to Schedule a Data Protection Growth Report in CommNet using the predict option, the Schedule wizard does not launch. |
| 34108 | RootOfCPUFolder, | 1.. Added support for recording unix group/other user's access 2.. Added support for 64bit installs via reduced/native packages 3.. Custom package creator to not show all OEM brands. |
| 34100 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34097 | DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, File Archiver for UNIX Agent, MediaAgent, PostGres iDataAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Predictor for Continuous Data Replicator, Base0 Client, Pre-PostInstall, Resource Pack, Media Explorer, CommNet Browser, Resource Pack Internal, Resource Pack Limited, CommCell Console, | 1. Procedural Language Restore support as part of Granular Restores. 2. Maintenance Database restores crash on 64 bit Linux 3. During restore if don't import to server option is enabled, the objects selected for restore are being dropped from the database. 4. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 5. DB2 Incremental backup throughput is affected by archive logs inclusion in backup image. Special Note: Please set the following registry key to Yes under Db2Agent/.properties on DB2 client machine. SKIPLOGSINBKPIMG Yes 6. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 7. FileSystem Backup Jobs pending with error code [82:156] |
| 34092 | MediaAgent, Oracle iDataAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, | 1. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get array info. Please enter array info from Array Management" 2. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 3. Snapprotect should pick pre-established bcv mirrors and incrementally establish before splitting the bcv 4. Registry hook to use pre-masked devices during mounting and leave them masked during unmounting for EMC symmetrix Special Note: On proxy machine registry key "nDisableConfigChange" when present under "iDataAgent" and set to 1 uses pre masked BCV for mounting. 5. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 6. Snap backups would fail when symmetrix device numbers for source disks exceeds 999 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 9. Mount for raw device may fail on AIX and Sun due to conversion. 10. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 11. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 12. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 13. Support SnapProtect for VMAX Symmetrix Array. |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Restores may fail from Variable Content Alignment enabled backups. 2. Dedupe not working for Synthetic Full backups 3. DB2 Backup fails with library load error on AIX. |
| 34042 | CommCell Console, | 1. Cannot reconfigure a unlicensed media agent. 2. Display warning on commcell console during login when capacity license is exceeded. 3. Deconfigured Clients are still visible even when we select "Hide Deconfigured Clients" option from the Control Panel->UserPreferences 4. Out of Place restore from Find Window for LNDOC does not restore the db title and as a result the db could not be opened 5. Enhancement to show the estimated baseline size on Deduplication tab of Storage Policy Copy Properties and on the warning message when sealing the deduplication store. 6. Duplicate resource pools may be shown on the Provisioning tab of the Storage Policy Copy properties dialog. 7. SnapType is always displayed as 'Primary' for vault and mirror in the snap details while viewing the snaps. |
| 34028 | CommCell Console, | 1. Added an option to have a check box “Include Capacity Usage” to display the License Capacity Usage information in the License Summary report. |
| 34007 | MediaAgent, | 1. Fixes issue where application data size displayed is much greater than actual backed up data size, when there are lots of sparse files or Archiver stubs in subclient |
| 34000 | CommCell Console, | 1. Job Delay Reason error code hyperlink to point to correct mini brand 2. Commcell console does not allow selection of restore only exchange MB agents 3. Schedule are wrong when exception of "WeekDays" or "Days" are added to weekly schedule. 4. "Select item with attachment(s) only" option may not work for public folder archiver Special Note: if the subclient is already created with any rules, clear all the archiving rules before applying the patch. For the new subclients it will work fine. 5. Backup Job Details window shows wrong "VM Backup Level" while Backup job is running 6. When viewing the Backup history from client or CS Level, the GUI does not refresh properly to display the jobs. |
| 33987 | Continuous Data Replicator, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33984 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33971 | QSnap, | 1. Added support for Red HAT 6 and SuSE 11. Fixing the cxbf script. |
| 33939 | Sybase iDataAgent, | 1. Support for Sybase backup and restores in a firewalled environment |
| 33906 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, MediaAgent, Predictor for Continuous Data Replicator, Base0 Client, Resource Pack, Media Explorer, CommNet Browser, Resource Pack Internal, Resource Pack Limited, CommCell Console, | 1. Enhancement to allow marking backup files as read only for cloud devices that supports retention locking. 2. Enhancement to support Dell DX Object Storage Platform and HDS HCP. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. DASH Auxilliary Copy job may go to pending with job pending reason: Cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported. 8. Content Indexing job read failure from a chunk created by a suspended backup job on a Hardware single instance target. 9.. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 10.. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. 11.. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. 12. Prunable data on disk associated with DeDup storage policy may not be removed due to registry lookup failure. |
| 33878 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, SAP for Oracle, | 1. Special characters in the data cause SRM Data Collection jobs to fail. 2. Enhancement for VSA restore changes. Support for additional parameters during restore. 3. End User Search capability for Outlook Add-In Users 4. Read Ahead NAS backup options may not be available after upgrade to 9.0 5. Store additional metadata in index for virtual server agents 6. Capacity Usage table is currently not available in License Summary Report 7. Protected files report show incorrect file size. 8. Virtual Server Agent browse may fail when number of volumes in a virtual machine is greater than 20 9. Exchange Mailbox Archiver stub recalls may fail if user's smtp address has a case change in the middle of a cycle. 10. Browse fails after upgrading Media agent to 9.0 11. Commcell console does not allow selection of restore only exchange MB agents 12. Server side changes for enhanced VSA restores. |
| 33848 | CommCell Console, | 1. Unable to reset credentials for job results directory for windows clients 2. FTP server information for download updates does not need to be shown to the user. 3. Enhancement to support network throttling from MediaAgent node |
| 33827 | CommNet Browser, CommCell Console, | 1. Calendar display issue in french console while viewing schedules. 2. Updated Japanese translations 3. Exporting media from the location node in the GUI may fail. 4. Push Firewall Configuration option is not available from MediaAgents node 5. Fast version is getting saved in DB with incorrect value. 6. Delete cache content Dialog does not show the correct icon 7. Name Management Dialog in Control Panel does not show correct icon 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect: GUI Usability enhancements. 9. Client Group selection from install software screen looks distorted. |
| 33810 | Novell OES Groupwise DataBase iDataAgent, Novell OES File System iDataAgent, Novell OES Directory Services, | 1. Incremental Backup completing with invalid path errors. |
| 33787 | CommCell Console, | 1. Snap to Tape Proxy drop down not visible on subclient properties 2. Enhancement to disable GUI option of 'Reboot Client' in 'Install Updates' job using a configuration parameter 3. CommCell Gui Navigation Window does not show up even after "Reset Windows Layout" |
| 33737 | Data Classification Enabler, UNIX File System iDataAgent, | 1. Incremental backups using DC on HP-UX backup all the data. Incremental FS scans with reference time less than the DC DB creation time should fall back to regular scan. 2. UNIX DC install will fail if FS IDA is already installed and patched to SP1a. |
| 33701 | CommCell Console, | 1. Advanced options in restore screen not opening since its throwing null pointer exception. 2. Discovery on one subclient was causing content of other subclient to be lost in case the VM is marked for Deletion. 3. Fast version mismatch in CI engine properties. 4. Read ahead processes in Advanced Backup Options for Bluearc may not be visible after upgrade to 9.0 5. In License Dialog Capacity Usage tab, add up the Enterprise and Core values to show a Total bar. |
| 33672 | MediaAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33645 | CommCell Console, | 1. New client icons for Virtual Machines that are not backedup. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33615 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, Media Explorer, Image Level iDataAgent, Image Level ProxyHost iDataAgent, | 1. Backup of Image Level on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow 2. CVD crashes when I try to detect Volumes with Volume Explorer. The issue happens wnen there is an extra folder under /dev/rdsk. 3. Restore of 3TB volume with 90 percent of the capacity used is found to be corrupted after restore. 4. Failure to detect all devices using volume explorer on redhat6.0. |
| 33590 | CommCell Console, | 1. VSA instance creation for VMWare defaults should be modified to select "vCenter" by default. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 3. When viewing the Backup history from client or CS Level, the GUI does not refresh properly to display the jobs. 4. While creating new SQL server subclient, the proxy list is empty 5. Capacity Usage table is currently not available in License Summary Report 6. Exchange DB subclients are not visible 7. Enhancement to support network throttling Special Note: The minimum value for throttling is 128kbps. |
| 33585 | Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. CVD may crash on a busy firewalled setup 2.) Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels. 3.) sBindToInterface registry setting didn't work with hostnames (only with IPs) 4.) Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks 5.) Persistent tunnels were prebinding to the wrong IP on roaming laptops 6. Log browse across firewalls may hang if SSL is in use 7.) CVD trying to do name to IP resolution every second 8. Log browse across firewalls may hang if SSL is in use 9. Backups through firewall may become unresponsive 10. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 11. Fix for CVD service not coming up sometimes. 12. Automatic scheduled jobs would not run after failing to get the job status. 13. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33578 | Lotus Notes Database iDataAgent, | 1. In browse and restore, when parent directory is selected for restore, checking for delimiter in the path is throwing exception and also when we get data from multiple archive files, calling initgroups second time throws an error. 2. Restore All Version of database for Lotus Notes Database iDataAgent fails on UNIX platforms |
| 33569 | Base0 Client, | 1. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 2. Fix for copying servicepack.ini of unix SP 3.. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 4.. Copy software fails to update installer files. 5.. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33531 | Domino Mailbox Archiver Agent, | 1. Unnecessary persistent recoveries are kicked off on cluster Domino nodes.
CvlnDMHook log not getting rolled over.
Special Note:
Domino server need to be restarted after applying the update.
Registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\AvoidInvalidRecalls" needs to be set to prevent persistent recoveries during stubbing. Valid values for this key are 0 or 1. An optional registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\StubbingDelay" defines time in seconds, after stubbing, during which persistent recoveries will not be allowed. Absence of this key will default the value to 120 seconds (2 minutes). This update contains logs rollover functionality along with the resolution to prevent unnecessary persistent recovery. Following are the registry keys for configuring log roll over: "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\LogFileSize" Defines size in MB. (For eg, if user set its value to 10, maximum size of log file will be 10MB). If key is not present the size will default to 5 MB. "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\NumLogFiles" Defines number of files to keep for roll over (History). Absence of key defaults this number to 5. With the default values of the keys, system will maintain a total of 25 MB size of logs. The log files will have "_n" appended to the original file name with cvlnDMHook.log_1 being the latest rolled over log file. All the above-mentioned registry keys are DWORD values. For Unix platforms, log roll over registry keys are following parameters in notes.ini file: CvLogFileSize and CvNumLogFiles. Behavior and valid values for these parameters are same as above mentioned Windows registry values. |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33504 | CommCell Console, | 1. New Images for snapvault and snapmirror. 2. Enhancement to support NetApp SnapVault and SnapMirror 3. NetApp Snap Protect Changes 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 5. Branding changes |
| 33500 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Predictor for Continuous Data Replicator, CommCell Console, Media Explorer, CommNet Browser, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, File System Filter Driver, | 1. Second migration may trigger stub recall on XFS 2. Machine may crash when migrating subclients with nested mount points. 3. kcxfs processes showing on cluster FSDM machines stay in "D" state skewing up system load averages 4. DC needs access to some of the CDR ioctls 5. Simpana startup script failure 6. Simpana startup script failure 7. DC DB may become out of sync in case of file resizes or stubbing/unstubbing. 8. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 9. Fixed possible system crash during page writeback 10. Added CDR driver Support for suse11 update1 11. Added CDR driver support for Red Hat 6. |
| 33486 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, MediaAgent, | 1. Backup Copy of Virtual Server Snap fails in mounting of snap |
| 33443 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33416 | CommCell Console, | 1. Disable reports entry point for DC GUI 2. Updated Japanese translations Special Note: Localization Strings. |
| 33411 | UNIX File System iDataAgent, | 1. AIX 1-Touch backup failing on a systems with disabled Volume Groups.
2. AIX 1-Touch backup failing when NIM network is used with Gigabit
Ethernet-SX PCI-X Adapter
Special Note:
The 1-touch backup will fail when one or more in-active volume is
present. To get successful 1-Touch backup, use the following registry to
skip the inactive volume groups.
Registry path :
/etc/CommVaultRegistry/Galaxy/ |
| 33406 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Command line support for creating VSA subclient 3. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 4. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 5.) Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | DB2 iDataAgent, Documentum iDataAgent, File Archiver for UNIX Agent, SAP for Oracle, MediaAgent, Oracle iDataAgent, Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. DB2 Snap Backup fails while accessing online logs files. 4. CvMountd may crash if the network is slow 5. Utilize multiple streams during restore from Snap and Sanp Backup Copy. 6. Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. 7. Random file-level restore failures from Image backups on AIX. |
| 33306 | CommNet Browser, CommCell Console, | 1. New features support for Express Commcell 2. Unable to submit Restore Job from EZ Operations wizard 3. Enhancement to show Resource Pool information in Copy Properties dialog 4. Enhancement to show Resource Pool information in Media Information Report |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33205 | External Data Connector, | 1. VSA Mining client side changes 2. Adds support for VMware Application Level quiescing when using ESX 4.1 and Windows 2008 r2 3. Sometimes discovery process is failing during processing magnetic libraries list |
| 33193 | CommCell Console, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 2. Error 'Invalid Patch install Path' is displayed when user tries to change or check settings in properties for some clients. 3. Creation of Storage Policy fails if Dedup or SnapProtect license is not present in the Commserve. 4. Snap to Tape proxy drop down is not visible on the SnapProtect panel for VSA Subclient properties. |
| 33151 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33134 | CommCell Console, | 1. Restore from Outlook Add-in fails with Security exception 2. Restore from Outlook Add-in using "Unconditionally Overwrite targets in their original location" fails 3. Use special icon for the MUSIC,LIBRARIES,PICTURES,DESKTOP,DOCUMENTS and VIDEOS folder in the content browse dialog. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33077 | CommCell Console, | 1. Enhancement to add CommCell Console support for Dell DX Object Storage Platform and HDS HCP. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. When adding a new subclient to a client, schedule policy associations display incorrectly if a schedule policy already in use on the client is selected from the Backup Schedule dialog. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect |
| 33072 | RootOfCPUFolder, | 1.. 1.custom package creation for oracle/db2 ida's on s390 platform 2.. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | MediaAgent, Media Explorer, SAP for Oracle, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Continuous Data Replicator, | 1. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 2. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 3. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 4. SAP datafile restores from Commcell GUI fails 5. SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 6. Oracle Snap Restore fails if incremental tape backup is run after the Snap. 7. Snap revert operation failing on Solaris client when mount point is in root directory. 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Predictor for Continuous Data Replicator, CommCell Console, Media Explorer, CommNet Browser, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32980 | MediaAgent, | 1. Hardware snap creation will get failed if more than 2 filers configured in array management screen. Special Note: In New XCLI installation on VSA proxy scenario use below registry key to avoid reboot to set XCLI tools path. "'iDataAgent\XCLI_BINARY_LOCATION'" and set the value to install path of xcli example: "C:\Program Files (x86)\XIV\GUI10" |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32951 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, MediaAgent, | 1. Recalls on Exchange Mailbox Archiver stubs fail after upgrading CC and MA from 8.0 to 9.0 2. Index restore crashes during virtual server incremental backups 3. Fix for Virtual server iDA point in time restores from snap backups 4. createIndex sometimes fails with index moved between different MA machine architectures 5. image level iDA file browse fails on sparc solaris 64 bit media agent 6. Browse enhancements for exchange mailbox archiver agent to show all stubs within a given time range. 7. Archiver jobs fails after upgrading CS and MA to 9.0 and when data was erased through Browse prior to upgrade. 8. Initial backups might fail going to upgraded MA from 8.0 to 9.0 with grid store enabled and index cache server configuration. |
| 32949 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32945 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, MediaAgent, | 1. DDB reconstruction fails. 2. DDB simulation tool hangs when multiple simulations are attempted in parallel on the same machine. 3. NAS iDA backups to a tape drive on a NetApp file server are failing in the archive index phase with an error indicating "an internal software error occurred". Failure happens when using ONTAP 7.3.3 and IPv6 is not configured on the MediaAgent. 4. Dedup backups to dedup storage policy may stop working with the error: "Failed to start a transaction" 5. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 6. Auxcopy process may crash intermittently when dedup read ahead feature is active 7. DeDup Reconstruction job may fail in the [Add Records] phase. 8. Auxiliary Copy operation from DeDup enabled storage policy copy may fail if look ahead read is enabled. 9. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. |
| 32936 | Continuous Data Replicator, Media Explorer, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, | 1.. Added NFS Snap Protect support for Solaris Local Zone. 2.. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 3.. When mounting a snap do not guarantee space. 4. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32909 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Enable HDS ShadowImage differential resynch for HDS SnapProtect. Special Note: To enable the fix in this update, create the following DWORD value under the EventManager section of the Client registry: CVHDS_USE_DELETED_SHADOWIMAGE and set the value to 1. 2. Unmount is reported as failed from HDS Snap Engine even if it is successful. Special Note: Stop the services before applying this update |
| 32856 | CommCell Console, | 1. Commcell Console may reset the high water mark value to 1 if it is set to more than 1000. 2. Added ability to view the admin job history for tape catalog jobs. 3. Saving job history results from commcell console as xls or csv shows commvault.dialog.JobIdRenderer$JobIdClass@1ae13c0 in the job id column 4. FileSystem Agent with File System Archiver driver installed has two job options which are shown on the backupset property dialog. These options are "Preserve File Access Time" and "Check Archive bit during backup". Current setting for these two job options is to always default them to on, when classical scan is selected. Changing this behavior such that user can now edit these options. 5. Enable “Archive Files per BFS” when “Protect Backup Recovery Area” or “Backup ArchiveLog” is selected. 6. Instance properties dialog for SAP for Oracle iDA may not come up in GUI. 7. Cancel button on login page when SSO is being attempted may not work 8. When viewing Job History from the client node level,backup history table columns and values are mismatched. 9. Array Credentials dialog does not come up on the instance properties. 10. Commcell Console does not retain Job Controller columns selection. 11. Changing client properties may incorrectly reset the property to inherit settings from client group 12. GUI freezes when doing a push firewall from clientgroup level 13. Use special icon for the MUSIC,LIBRARIES,PICTURES,DESKTOP,DOCUMENTS and VIDEOS folder in the content browse dialog. 14. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 15. Enhancement to support ROMS license. 16. Web Console Restore does not return data after Commserver services are recycled. 17. GUI may freeze when you move between Client node and Exchange Compliance Archiver node multiple time. |
| 32762 | CommNet Browser, CommCell Console, | 1. GUI may cause an exception while browsing the commnet node after performing an "import from pod cell" operation 2. GUI may cause an exception when launching "commcell export" after performing an "import from pod cell" in case deconfigured clients exist that are hidden. 3. More clear default schedule name for "Import from podcell" import schedules. 4. Import from Podcell: Enhancement to work across a firewall Special Note: To use "Import from Podcell" across a firewall, first add the Commserve as a new client by right clicking the client node and adding the Commserve. Then configure the firewall settings for that Commserve client. In the "Import from Podcell" screeen, choose the new third option where a client can be selected. Choose the client name of the Commserve. Note: This also requires updates: TO BE ADDED!!!!! 5. Reboot option for Remove Updates is not supported and should be disabled 6. De-Configured client do not show up in client group if the "Hide De-Configured Clients" is selected. 7. Enable Find via Web Client 8. Unix Lotus Notes find and restore of mails are failing 9. When we try to create a schedule using French GUI, OK button is not clickable. 10. Subclient level data not getting updated when instance info of username/password/vcenter name is changed. 11. Browse For Datastore says "Password Cannot Be Empty" 12. "Find and Recover" from Outlook Add-In not working if the client date format is in a non US locale, User will get Application init error popup message box and find and recover window will not launch |
| 32719 | External Data Connector, | 1. Discovered Netbackup exported media are not shown in the media information report 2. Support Pre-deployment survey for external data collector. Special Note: Refer to online document External Data Connector Pre-Deployment Survey. 3. Support for TSM version 6.1.3 4. Fix for Fastpass discovery job running CVForeignHandler.exe module at 100% CPU. 5. Vsa snap mining provider and mining changes. 6. Support for TSM 6.2. 7. Support for the migration of TSM Enhanced Schedules. 8. Support for Tsm output files with unix format. |
| 32695 | DB2 iDataAgent, Documentum iDataAgent, SAP for Oracle, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, Oracle iDataAgent, | 1. MySql restore fails with library load error 2. Log Restore by LSN range fails on HP-UX IA64 3. SAP/Oracle restore fails from tape copy of snap data. |
| 32638 | Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, UNIX File System iDataAgent, | 1. archiveIndex not starting on MAs Incremental backups fail in ArchiveIndex phase when there is nothing to backup. 2. Ifind goes to pending with loss of control for lotus Idas on linux-x64. 3. Taskbar icon to show status of currently running backups and information about previous backups. 4. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 5. Laptop backup progress indicator isn't showing throughput or amount of transferred data. 6. Adds File Archiver support for new Ibrix FS. 7.) Reason why new jobs cannot be scheduled was not passed to backup tray utility 8.) More information displayed on backup tray utility 9.) Name of the current file wasn't shown in backup tray utility on UNIX 10.) Total file count was not set on UNIX 11.) Final job status was not passed to backup tray utility |
| 32539 | Base0 Client, | 1. Fibre Channel card not detected on Solaris OS setup with multiple Fibre Channel cards. |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32499 | NDMP Remote Server, | 1. NAS iDA dedup rate is not good when using compression with dedup. 2. Restore from NetApp NDMP job appears to hang. Problem occurs when the file server requests a read from a past offset. |
| 32468 | CommCell Console, | 1. SRM Exchange Physical Devices view shows every physical disk on the machine. 2. For the File System backup agent, on the subclient properties window, the File Filters pane on the SRM Options tab may be activated even though the File Level Analytics checkbox is not checked. 3. For the File System backup agent, on the subclient properties window, the File Filter pane on the SRM Options tab for Creation Time works in the opposite way as the File Filter for Modification Time or Access Time. 4. For the File System backup agent, on the subclient properties window, the File Filter pane on the SRM Options tab for User Name or Group Name may not work with spaces. 5. 1Touch Linux: In response file Configuration screen logged in user is not getting populated it shows as dummy-user. 6. Following issues with 1-touch are fixed. 8. Unable to edit "Ethernet Device" properties. 7. Dates are not listed in sorted order. 8. Crashing EvMgrS when choosing data paths for SAP MAXDB node. 9. For Active Directory iDA, user is unable to select attributes from multiple objects for restore at the same time. 10. No way to stop loading What's New in Java Commcell Console if there no no internet connection. 11. In Capacity License Usage chart, the percentage shows bogus number when there are 6 or more digits. 12. Cannot associate any Security group for "defaultBackupSet" of Virtual Server Agent 13. Enhance browse and restore to span across cycles and subclients for Exchange Mailbox Archiver 14. Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level. 15. Remove the "Summary "Tab from the Client Comupter groups properties Firewall config tab in GUI. 16. Commcell Lockdown option for clients will show only if client is CS or MA. |
| 32384 | UNIX File System iDataAgent, Data Classification Enabler, | 1. DC Performance Enhancements Special Note: This update will rebuild DC Databases for all volumes linux_9.0.0B84_31906 and hp_9.0.0B84_31907 are pre-requisites |
| 32316 | SRM UNIX File System Agent, UNIX File System iDataAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, | 1. NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" 2. Unix File system backup is slow. 3.. The UNIX File System backup will not backup data of a symbolic link when it is a sub-client, the "Expand symbolic links of subclient content" is checked, the symbolic link located in the root directory and it is linked with a relative path started with non-path delimiter symbols ('.' or '/'). 4. This update enables reporting of multipath devices and file system configured on multipath device mapper. |
| 32297 | MediaAgent, | 1. New media are not detected after adding the media to the magazine for some libraries. |
| 32245 | Base0 Client, | 1. Added support to host DC database on a central non monitored volume. |
| 32234 | Base0 Client, | 1. Net app images for some languages have incorrect images for applet launch page |
| 32196 | Continuous Data Replicator, | 1. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. 2. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. Fix for installing CDR on sol2.9 |
| 32134 | CommCell Console, | 1. 9.0 Build SP1 PostgreSQL iDA----> We should not drop the tables If we check the option (Don't import to server) 2. When restore Oracle control file and data and selecting "Reset Database" on restore -> Advanced -> Options tab, the following error message is displayed: "Cannot select both "NO CATALOG" and "Reset Database". 3. Enable VSS option not showing on windows 7 32 bit OS 4. Unable to do Point-in-time restores between two cycles for SQL agent. |
| 32117 | Informix iDataAgent, Sybase iDataAgent, DB2 iDataAgent, Documentum iDataAgent, SAP for Oracle, Oracle iDataAgent, | 1. DB2 agent restores all log files with the matching sequence number. 2. Oracle, DB2, Informix and Sybase Backup/Recovery support for Dedupe with Variable content alignment(VCA). |
| 32031 | MySQL iDataAgent, | 1. Failure in recurring log restore when only single db is restored. |
| 31873 | CommCell Console, | 1. Script created by "save as script" during "Import from Pod Cell" may fail to create the schedule on the source. 2. When saving the export schedule as a script, the 'Import from Pod cell' wizard may exit prematurely without asking all questions. 3. Allow relative time selection for "import from pod cell" captures. 4. Outlook Add-In Find and Recover may fail to launch. 5.. The option 'Create a New Snapshot copy ' is not available for a Storage Policy using a NAS Attached Library. 6.. "Run backup copy" operation is missing in SP level for a Primary copy which is created with NAS attached library. 7. Multiple fixes to support Snap protect for NAS IDA 15. Remove "Use proxy" of subclient snap protect operations for NAS NDMP snap protect feature. 8. Show only "Netapp" snap engine in the Available Snap Engine drop down list for NAS NDMP Snap protect feature 9.. SnapProtect feature should not be available for celerra or any filers other than NetApp. 10.. In Array management window, NetApp is default Snap Vendor 11.. Remove "Use Source if proxy unreachable" of subclient snap protect operations for NAS NDMP snap protect feature. |
| 31870 | Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Oracle offline backups with Lightsout script fails in csh environment. |
| 31868 | Media Explorer, Continuous Data Replicator, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, MediaAgent, | 1. CVMA or CVFSSnap may crash while running clariion backups. 2. CVMA crashes when the registry key SYMAPI_HOME_DIR is not created in Unix platforms. 3. HDS Snap cleanup fails with the error "Replication group not found". 4. Clariion Snap/Clone jobs may go to pending with error "Failed to get device array info from device path" 5. Clariion snap and clone jobs do not use the device mapper pseudo device path when Linux native MPIO is installed. 6. After running SRM Analysis on NDMP client, some of the files with no extension are not reported properly by SRM Reports. 7. During a Nas backup, if the Job Manager service goes down for some reason, nasbackup continues backing up data. nasBackup should detect this condition and fail the backup phase with a relevant pending reason. 8. XIV snapshot mount operation on a VM (hosted on ESX server) fails. 9. Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete. 10.. Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 11. VmWare backup copy job fails with error "Failed to get device list" while mounting Clariion Disk 12. Added snap engine support for LSI OEM Disk Arrays with VMWare. 13. Enhancement to support VMWare for HDS snap engine 14. Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit." 15. Unable to run successful VSA SnapProtect backups in some cases when the ESX server has huge number of disks. 16.. Added required support in addition to others for NAS Snap Protect. 17.. Add support for Snap Protect to the NetApp NAS iDA. |
| 31825 | Base0 Client, | 1. Linux 1-Touch GUI does not save the disk information after mapping is done |
| 31818 | UNIX File System iDataAgent, | 1. 1-Touch restore GUI screens are garbled. 1-Touch restore fails if CS and MA are on different servers. |
| 31806 | Base0 Client, | 1. Laptop Backup install support for unix install |
| 31797 | CommCell Console, | 1. Updated help content for CommCell Console |
| 31761 | Pre-PostInstall, Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Resource Pack, Resource Pack Limited, Resource Pack Internal, File Archiver for UNIX Agent, UNIX File System iDataAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Fixed a condition where Install and Uninstall Software could fail without reason. 2. Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID. Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. 3.. Unable to recall stub files after deleting the subclient. 4.. Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store. 5.. In certain cases, creation of storage policy pointing to a global deduplication policy fails. 6. Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console 7. SRM FLA Filters are not working when User Name or Group Name contains spaces. 8.. Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. 9. NAS Backup is failing in round-robin scenario 10. Stubbing fails during Turbo FS incremental job if files were renamed or deleted. 11. Support for 1Touch ResponseFile configuration. 12. EvMgrC does not start after installing 9.0 SP1. |
| 31737 | Content Store, MediaAgent, Media Explorer, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, File Archiver for UNIX Agent, UNIX File System iDataAgent, Base0 Client, | 1. Send Log Files operation from CommServ console when run on Unix clients does not gather galaxy log files. 2. Enhanced File System IDA to support archiving. 3. Enhanced File System IDA to support archiving. 4.. EvMgrC failing to start on Mac OS X. |
| 31679 | UNIX File System iDataAgent, | 1. AIX 1-Touch backup job is failing with message "The MAC address is not set or incorrect in NIM Master for this client." Special Note: The standard Ethernet Network adapter must be available on the 1-Touch client machine and configured to be able access 1-Touch boot server (NIM Master machine). All EtherChannel adapters must be configured with interface number higher than any standard Ethernet Network adapter. The NIM Master must be configured with Network resource for network of that standard Ethernet Network adapter on NIM Client machine. After 1-Touch recovery the machine will be reboot to finalize the configuration. 2. Added new YCP GUI support. 3. Enhanced 1-Touch recovery via response file created during the backup. |
| 31660 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Enhancement to allow end users to browse via Web console 2. QSDK crashes on running multiple On Demand Backups from command line. |
| 31649 | Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, UNIX File System iDataAgent, | 1. Job management from mobile devices. 2. Taskbar icon to show status of currently running backups and information about previous backups. |
| 31610 | CommNet Browser, CommCell Console, | 1. New Images for Netapp OEM 2. Disable or hide VSS metadata option from job options 3. Help link may not work for advanced discover dialog of external data connector for TSM 4. Enhancement to support SharePoint Database backup and restore of individual sites. 5.. Exchange database subclient may have duplicate content if a configuration change is canceled. 6.. snapvault and snapmirror support Help URL 7.. Enhancements to support 1-Touch Response file One touch restore file changes 1.Export of file to local disk 2.Editing restore File |
| 31570 | Base0 Client, | 1. cvlaunchd leaks memory |
| 31566 | Base0 Client, | 1. SDR may restart processing from the beginning in case of network errors instead of from the point where the error occurred. |
| 31563 | CommNet Browser, CommCell Console, | 1. Help may not work correctly for "License Usage" tab for "License Administration" dialog 2. Enhancement to allow end users to browse via Web console 3. Laptop Backup push install support for Windows/Unix/Mac 4. Enhancement to allow setting machine owners on the client properties 5. From the client property dialog, user should be able to associate a backup set with a subclient policy. 6. Enhancement to allow exchange mining from VSA snaps 7.. Enabled "Software Compression" option for NAS |
| 31499 | SAP for Oracle, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Predictor for Continuous Data Replicator, CommCell Console, Media Explorer, CommNet Browser, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, MediaAgent, | 1. Backup might fail when too many jobs are run. 2.. GXHSMService crashes during service shutdown or service restart. 3.. Support unix intermediary media agents for pod cell imports. 4.. Fixes folder deletion warning during deconfiguration of Dell DX6000 and other Object based cloud library mount path. 5. Automatic schedule support for laptop and desktop backup. |
| 31447 | Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Fixes occasional CvMountd crash on Unix MediaAgents. 2. Enhancement to allow exchange and sharepoint mining from VSA snaps 3.. Support for laptop and desktop backups Fix for cluster upgrades for missing DB package rows. Support for Unix Turbo File System |
| 31444 | MediaAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, File Archiver for UNIX Agent, Base0 Client, Oracle iDataAgent, Media Explorer, SAP for Oracle, | 1. Backups might fail for certain iDAs when staging index cache location is enabled. 2. PostgreSQL iDA Table level restores are failing 3. UpdateIndex might fail with error "Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover" when several backup jobs start running simultaneously. 4. Backup job might fail with error "Loss of control process archiveIndex.exe" when several backup jobs start running simultaneously. 5. Fix for browse failure when a job fails over between multiple datapaths and Index Cache Server is configured. 6. To remove use exact index option and for the system to automatically choose what index to use. 7. TurboFS backups and restores sometimes fail. |
| 31425 | Content Store, UNIX File System iDataAgent, Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, File Archiver for UNIX Agent, | 1. GXHSMService dumps core during service shutdown. 2. Enhanced File System IDA to support archiving. |
| 31353 | CommCell Console, | 1. Scheduling of "Review set Activity report" may give error "Please select a webServer". 2. New option in Commcell configuration report to show index cache content information Special Note: This update needs to be installed with the update form 07469 3. SRM enterprise storage aggregate report might show inappropriate tooltip. 4. In subclient properties for the File System agent, SRM Options tab, the File Filters for User Name and Group Name may not work if they have single backslashes. 5. Under a Unix client, Storage Devices node, Volume Groups in the General section of a single storage device may display incorrect information. 6. User name string text change in TSM instance Property dialog 7. Remove the exclusive constraint of 'Embed the recall link into body' and 'Leave Behind Message Body' Archiving Rules for Exchange Mailbox Archiver. 8. Creation of new subclient for Exchange Database agent does not show available proxies for Snap Protect 9. Exact index option is no longer supported and is removed from the gui GUI update for SRM support for NAS NDMP Agent. 10.. GUI update for SRM support for NAS NDMP Agent. 11.. Enhancement to allow archiving on file system agent 12.. Exchange Database restore failing with 'No Backup data' found 13.. Add/Remove Software option is missing for Logical Clients 14.. Gui Changes related to Laptop Backup 28.. Ability to add additional subclient content when the client or backupset is associated with subclient policy. 15.. Ability to define user specific content such as my documents, my videos, my music to subclient content. 16.. Redesigned automatic scheduler options 17.. Install update support for Automatic scheduler 18.. Added new Automatic scheduler option "stop task if battery mode begins" 19.. Do not show disk space usage option for install update schedule. 20.. Snap Backup and archiving option for File system cannot be selected together. 21.. Data Class Set should be disabled for windows and unix File Systems |
| 31336 | Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, | 1. Lotus Notes Document agent restores and Data MIgrator recalls are failing on domino 64 bit running on AIX64 . |
| 31327 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Job Pending reason is not correct when client side dedup backup is
attempted to an upgraded 8.0 DDB.
2. Restores from re-encrypted copy may fail if the Auxilliary copy operation
was performed using a Unix MediaAgent with 'Optimize for concurrent LAN
Backups' option turned off.
3. Backup might fail when too many jobs are run.
4. Enables the "Variable Content Alignment" feature
5.. SQL transaction log backup may fail with error "The control process for the
previous phase is still running. PID [ |
| 31283 | Base0 Client, | 1. Adding VCS specific scripts required for installation. |
| 31222 | CommCell Console, | 1. ESX Browse tab should not be available for Xen and Hyper V 2. When there is no Capacity License available the chart does not show the correct license usage. 3. Text changes to the commcell export/import GUI 4. Enable Intermediatory media agent option in 'Import from pod cell' option 5. Other miscellaneous fixes for 'Import from podcell' feature. 6.. Add Variable Content Alignment option on the Client properties. 7.. Should be able to browse the client during a mount operation for the "List Snaps" feature from the copy and Array Management nodes. 8.. Show the Option "Mark Files Read Only" on Cloud Libraries. 9. Not able to enable SILO on a new SP created after upgrade to an 80 MA. 10. On an upgraded CS, a storage policy copy pointing to an older DDB can incorrectly still have store reconstruction options set. 11.. Deduplication policy should not be created with an invalid DDB path. 12.. Enhancement to allow backup of Deduplication database. 13. Tape catalog save as script may fail to save the script. 14. Admin job history ->resubmit, Schedules->edit operation fails for tape catalog job. 15. Tape catalog job types can now be selected when getting the admin job history. 16. Catalog option at drive level for stand alone tape showed even if a media was already cataloged. |
| 31209 | SAP for Oracle, DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, UNIX File System iDataAgent, External Data Connector, Media Explorer, Base0 Client, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, MySQL iDataAgent, PostGres iDataAgent, | 1. Fixes CVForeignHandler.exe crash during EDC discovery phase. 2. GXHSMService crashes during recalls on a host with only VM (no PM) installed. 3. EDC Discovery on 5.1 NBU server (hpux) failed with error "Netbackup services are not running". 4. Sometimes Discovery job fails on machines where date format is different from mm/dd/yyyy or media server is not client on the Master server Special Note: This update MUST be installed along with update with form id 07678 5. EDC support for IBM TSM 6. File permissions on ORASBT.log is getting reset on restricted environments. Special Note: set registry key sSKIPRESETORASBTLOGPERMS to Yes under OracleAgent/.properties. 7.. Discover job merge failure when XML files are collected with decoupled database capture. 8.. Hide TSM admin passwords in logging. 9.. JPR for incorrect login/password. 10.. Unix Netapp NFS Snap protect support SILO DDB restore fails to restore DDB files. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 11.. Support for decoupled method of EDC TSM discovery using outputs of TSM commands run. 12.) Integrated install and File System IDA with Unix VERITAS Cluster. 13.) Enhanced File System IDA to support archiving. 14.) SILO DDB backup fails to backup DDB files. |
| 31175 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. Improves HPUX dedup backup performance. |
| 31146 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Predictor for Continuous Data Replicator, CommCell Console, CommNet Browser, Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, MediaAgent, Media Explorer, | 1. Silo Archival job may fail with missing chunk error. 2. Data size in Silo shown in Storage Policy Copy Properties and Storage Policy Report does not include the size of volumes processed by Silo Disk Cleanup. 3. Size of Dedupe DB is shown incorrectly in the Storage Policy report. 4. New option in Commcell configuration report to show index cache content information Special Note: This update needs to be installed with the GUI update form 07496 5. Notify GUI Server Developers: Item [^10] missing from cvEncode. should not be visible in GUI. 6. Restore/Auxilliary Copy jobs may not progress when Silo Retrieval job gets interrupted. 7. SILO Archived DDB is not removed from disk. 8. Jobs may fail to query CommServe Version string from Media Agent when CommServe is under heavy load. 9. Enhancement to support Dell DX Object Storage Platform and HDS HCP. Special Note: Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data. Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file. |
| 31140 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Base0 Client, | 1. Ability to run snap backup from qcommand followed by movement to tape job 2. qcommand.log may log passwords when using qoperation execscript command with password inputs 3.. QSDK.log log login credentials at default logging level. |
| 31123 | Base0 Client, | 1. Installation of Filesystem Agent Fails on Freebsd 7/8 amd64 |
| 31094 | MySQL iDataAgent, | 1. MySQL backup goes into pending state |
| 30975 | CommCell Console, | 1. Differential backup option for MySQL has been removed as it is no longer supported. 2. Full VM Restore fails to get the password if Override default selection option is unchecked for restores to clients earlier than 9.0 3. Browse and restore from client and agent level is not showing appropriate dialog for CDR 4. Virtual Machine summary details are not displayed when reached from either the client node under client groups, or from the client in the client list. 5. Changes to Notes DB/DOC/DM configuration may not get saved. 6. Exception when clicking on "Advanced" button for EDC discovery 7. In Billing Configuration, associating Billing Departments to Virtual Server entities is not saved. 8. Master server Name is not same as EDC Instance Name. 9. Sybase subclient may fail to save database if number of selected databases are higher than 150. 10. Enhancement to customize the "Recovered Items" folder name during "Find and Recover" operations from Outlook Add-In. |
| 30962 | MediaAgent, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, Base0 Client, Media Explorer, | 1. Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails. 2. Mount of the HDS snap is failing on partitioned device. 3. Snap reverts fixes for HDS Snap Engine. 4. Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) |
| 30939 | Content Store, | 1. Fix to create site in ContentStore when a previous site with the same name has been deleted. |
| 30931 | MySQL iDataAgent, | 1. Invalid bin log (data) path specified in Instance creation causes data loss. |
| 30926 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, | 1. QSDK crashes on running multiple On Demand Backups from command line. |
| 30902 | MySQL iDataAgent, | 1. Database names with special characters have problems in backup/restore operations. Special Note: 1. We don't support database names containing single quotes. |
| 30870 | Sybase iDataAgent, | 1. Sybase database discovery hangs for instance with many databases. |
| 30775 | UNIX File System iDataAgent, | 1. The mountpoint list does not come in a scrollable window. |
| 30660 | SAP for MaxDB, Continuous Data Replicator, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, | 1. Backup with Flash Recovery Area fails intermittently. 2. Mark Restore job status to pending if encountered any errors. 3. Oracle 11GR2 Table Restore fails with Tablespace not self contained error. |
| 30645 | Novell OES Groupwise DataBase iDataAgent, Novell OES File System iDataAgent, | 1. Out of disk space error while restoring files from NetWare 5.1 to OES Linux. |
| 30641 | MediaAgent, | 1. ScanScsiTool was missing from 32-bit Media Agent Package on Linux. |
| 30600 | CommNet Browser, CommCell Console, | 1. Subclient property dialog shows scroll bar on a low resolution screen 2. A. When Capacity License is over capacity, the RESET button stays enabled even after clicking it many times. B. License Usage chart always show "1000sed" in the footer even though the actual usage is over 100%. 3. Browse between different Timezone changes the date back a day and an hour. 4. Column values for Find results of LN Doc maybe mismatched when some o the values are empty 5. Browse from webUI for emails shows the meta data folder 6. Exception while opening License admin screen after applying capacity based license. 7.. Performing Restore after Find from Outlook addin throws exception 8.. Find and Recover does not honor client selection in Browse window 9.. The banner image for commcell console for Simpana Express is cut off |
| 30527 | Lotus Notes Database iDataAgent, Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, Media Explorer, Base0 Client, Resource Pack, | 1. Two library were missing from CVGxBase0 package. |
| 30506 | UNIX File System iDataAgent, | 1. Linux 1-Touch backup fails on systems having multipath devices configured. Special Note: 1] Install this update on the client before taking 1-Touch backups (required only on systems containinng multipath disks) 2] Use the bootcd during restore that contains this update. |
| 30505 | Content Store, Base0 Client, | 1. Need the ability to add/modify notes when Attribute search print lists are displayed in the SAP GUI Special Note: 1) The update will contain a .war file, this should be uploaded to the content server using the web UI provided by apache-tomcat (you may need to enable user-access for this through conf/tomcat-users file. 2) After the new war file is uploaded, restart apache |
Update No. |
Installed On |
Description |
| 34713 | CommCell Console, | 1. Browse backup data may not show the drive names on the table |
| 34691 | CommCell Console, | 1. Skip answers and continue "Import From Pod Cell" job if source CS is offline. 2. Resubmission of import job does not preserve the option consume license. 3. Resubmission of import job fails with error Validation of dump directory failed. 4. For ROBO, even if the remote Commserve is online, the CCM job is forced to be saved as script rather than registering the schedule on the remote Commserve directly. 5. Billing configuration does not retain settings and Commcell Console freezes 6. "Find" option in "Erase Data by Browsing" feature of Exchange mailbox/public folder agents shows find window in minimized state. It will be always on the task manager unless we close the Erase Data by Browsing window. 7. Erase data by browse rollback. 8. 1.While creating a new FS subclient, the SnapProtect checkbox in the Snap tab is checked by default. 2.Getting error message when trying to create storage policy using the existing global deduplication storage policy. 9. GUI Hangs when Last Sunday Monthly schedule is selected. 10. Unable to view restore schedule. |
| 34680 | Base0 Client, | 1. DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2. Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3. Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34661 | CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 2. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. 3. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 4. Supports Conversion of 8.0 version of DDB to 9.0 version. 5. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34599 | CommCell Console, | 1. Add Snap Protect support for Equallogic Arrays that have a separate interface for management and data. 2. Add multiple Data Readers support for NAS Subclients when SNAP is Enabled. Special Note: 1. If a dedicated management network interface is configured on Equallogic array, enter the management IP address in "Name" field when adding the array in array management. Otherwise this field should be left blank. The control host field will be used for Data interface as it is used today. |
| 34585 | UNIX File System iDataAgent, Base0 Client, Pre-PostInstall, Resource Pack, CommNet Browser, Resource Pack Internal, Resource Pack Limited, CommCell Console, | 1. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 2. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 3. SILO backup job goes to pending due to scan failure. 4. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 5. Directories specified in the exceptions list not being backed up. 6. FileSystem Backup Jobs pending with error code [82:156] 7. Failed files are not added into next incremental backup. 8. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 9. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 10. Media Agents goes offline intermittently due to registry permission issues. 11. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Base0 Client, | 1. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Base0 Client, | 1. Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2. CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34538 | Base0 Client, Resource Pack, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. 2. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 3. DB2 snap multistream restores may get stuck trying to detect SCSI devices 4. Snap Protect backup fails when HDLM multipath is configured on Linux. 5. Adding support for agile addressing on HP-UX |
| 34526 | Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34512 | CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34488 | CommCell Console, | 1. Remove GUI Options for Data Classification for Exchange 2. Unable to submit Restore Job from EZ Operations wizard 3. Unable to convert a Schedule to Automatic Schedule 4. 1.Chinese character can not be used as schedule name. 2.Schedule configuration which was created with chinese character name was lost after creating a schedule with english name. 5. Enforced minimum throttling value to 256 Kbps 6. Browse for Content on AIX and Solaris file system agents show folders like "Desktop, Documents, Movies, Pictures, Videos" 7. Express install is not showing eval token licenses correctly in 9.0 8. For VMware, File level and disk level restore should show Linux clients also part of destination clients. |
| 34485 | UNIX File System iDataAgent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34451 | Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Resource Pack, Base0 Client, CommNet Browser, Resource Pack Internal, Resource Pack Limited, CommCell Console, | 1. Simpana startup script failure 2. Simpana startup script failure 3. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 4. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 5. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3. Firewall related binaries are not packaged for 64bit platforms 4. Tunnels may not failover in cluster firewall environment |
| 34380 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. 13. Fix for updating baseline of SP1a on GUI 14. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 15. Fix for removing numbered update, that has an update number partially matching with another package 16. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 17. Partial enhancements for RemoveUpdates to expire old updates. 18. Added support in update installer to wait for sidb process. |
| 34352 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 6. Support SnapProtect for VMAX Symmetrix Array. 7.. Unmount failing during Oracle RMAN Snap to tape backup. 8.. Mount of SAP/Oracle backup volumes failing. 9.. Snap is failing on Linux when file system mounted using device name /dev/dm-*. 10. Snap mount operation failing. 11. Snap operation failing on multipath devices on Linux platform. 12. Snap mount failing on SuSE 11 |
| 34351 | CommNet Browser, CommCell Console, | 1. Default provisioning policy in the Provisioning tab for SP copy properties needs to be removed and Sna-RAID-DP to be selected by default. 2. While New Snapshot copy creation, the source copy panel is disable and nothing is selected. This doesn't let the user save any changes to the copy. 3. If user changes Catalog Profile settings on media agent properties, the user should be warned about copying existed indices to the index cache server. 4. Enhancement 5. Restore Enhancements for VMware. 6. Changed text to "Default time range for Outlook Add-In Find and Recover" in Browse Recovery Options dialog in Control Panel 7. Commcell firewall configuration may get reset when properties are changed |
| 34327 | UNIX File System iDataAgent, Base0 Client, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 4. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 5. Support for switch database mode GUI option for Oracle snap restores 6. SAP restore Job progress fix for multi-stream restores |
| 34317 | Base0 Client, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34266 | CommCell Console, | 1. Install Updates from CS level does not contain clients that are in the restore only/released state 2. SAP Oracle and Oracle: Open DB is ignored in case of Partial restores SAP Oracle:For Control file only restore does not need Data or Log to be selected. Oracle RAC: Atleaset one instance for restore needs to be selected by entering non-zero value for Streams 3. Unable to create SRM Reports Schedule Policy due to "Invalid Schedule Pattern" error. 4. Laptop Backup Web UI 5. MA side deduplication option is not saving at instance window for SAP Maxdb and Informix 6. Job controller not refreshing in Commcell Console 7. Enhancement to add a link on the Capacity screen to point to Books Online license administration. 8. "Next Job On" column shows incorrect value for automatic schedules and schedule policies 9. Enhancement to optionally skip catalog phase for snap backup 10. Enhancement to default SQL agent settings for higher performance |
| 34176 | CommNet Browser, | 1. In scheduled Load Report the legend sometimes overlaps the chart in PDF format. 2. Localization fixes 3. After upgrading to 9.0 CommNet, sometimes Data Protection Activity and Data Growth report schedules fail to run. 4. Updated CommNet Browser Japanese translations. 5. In CommNet Browser, the User Preference setting of Timeout Enabled is not getting saved. 6. When trying to Schedule a Data Protection Growth Report in CommNet using the predict option, the Schedule wizard does not launch. |
| 34108 | RootOfCPUFolder, | 1. Added support for recording unix group/other user's access 2. Added support for 64bit installs via reduced/native packages 3. Custom package creator to not show all OEM brands. |
| 34100 | Base0 Client, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Base0 Client, | 1. Restores may fail from Variable Content Alignment enabled backups. 2. Dedupe not working for Synthetic Full backups 3. DB2 Backup fails with library load error on AIX. |
| 34042 | CommCell Console, | 1. Cannot reconfigure a unlicensed media agent. 2. Display warning on commcell console during login when capacity license is exceeded. 3. Deconfigured Clients are still visible even when we select "Hide Deconfigured Clients" option from the Control Panel->UserPreferences 4. Out of Place restore from Find Window for LNDOC does not restore the db title and as a result the db could not be opened 5. Enhancement to show the estimated baseline size on Deduplication tab of Storage Policy Copy Properties and on the warning message when sealing the deduplication store. 6. Duplicate resource pools may be shown on the Provisioning tab of the Storage Policy Copy properties dialog. 7. SnapType is always displayed as 'Primary' for vault and mirror in the snap details while viewing the snaps. |
| 34028 | CommCell Console, | 1. Added an option to have a check box “Include Capacity Usage” to display the License Capacity Usage information in the License Summary report. |
| 34000 | CommCell Console, | 1. Job Delay Reason error code hyperlink to point to correct mini brand 2. Commcell console does not allow selection of restore only exchange MB agents 3. Schedule are wrong when exception of "WeekDays" or "Days" are added to weekly schedule. 4. "Select item with attachment(s) only" option may not work for public folder archiver Special Note: if the subclient is already created with any rules, clear all the archiving rules before applying the patch. For the new subclients it will work fine. 5. Backup Job Details window shows wrong "VM Backup Level" while Backup job is running 6. When viewing the Backup history from client or CS Level, the GUI does not refresh properly to display the jobs. |
| 33984 | Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33906 | Base0 Client, | 1.. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 2.. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. 3.. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. |
| 33878 | Base0 Client, | 1. Special characters in the data cause SRM Data Collection jobs to fail. 2. Enhancement for VSA restore changes. Support for additional parameters during restore. 3. createIndex sometimes fails with index moved between different MA machine architectures 4. End User Search capability for Outlook Add-In Users 5. Read Ahead NAS backup options may not be available after upgrade to 9.0 6. Capacity Usage table is currently not available in License Summary Report 7. Browse fails after upgrading Media agent to 9.0 8. Commcell console does not allow selection of restore only exchange MB agents 9. Server side changes for enhanced VSA restores. |
| 33848 | CommCell Console, | 1. Unable to reset credentials for job results directory for windows clients 2. FTP server information for download updates does not need to be shown to the user. 3. Enhancement to support network throttling from MediaAgent node |
| 33827 | CommNet Browser, CommCell Console, | 1. Calendar display issue in french console while viewing schedules. 2. Updated Japanese translations 3. Exporting media from the location node in the GUI may fail. 4. Push Firewall Configuration option is not available from MediaAgents node 5. Fast version is getting saved in DB with incorrect value. 6. Delete cache content Dialog does not show the correct icon 7. Name Management Dialog in Control Panel does not show correct icon 8. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect: GUI Usability enhancements. 9. Client Group selection from install software screen looks distorted. |
| 33787 | CommCell Console, | 1. Snap to Tape Proxy drop down not visible on subclient properties 2. Enhancement to disable GUI option of 'Reboot Client' in 'Install Updates' job using a configuration parameter 3. CommCell Gui Navigation Window does not show up even after "Reset Windows Layout" |
| 33701 | CommCell Console, | 1. Advanced options in restore screen not opening since its throwing null pointer exception. 2. Discovery on one subclient was causing content of other subclient to be lost in case the VM is marked for Deletion. 3. Fast version mismatch in CI engine properties. 4. Read ahead processes in Advanced Backup Options for Bluearc may not be visible after upgrade to 9.0 5. In License Dialog Capacity Usage tab, add up the Enterprise and Core values to show a Total bar. |
| 33645 | CommCell Console, | 1. New client icons for Virtual Machines that are not backedup. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33590 | CommCell Console, | 1. VSA instance creation for VMWare defaults should be modified to select "vCenter" by default. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 3. When viewing the Backup history from client or CS Level, the GUI does not refresh properly to display the jobs. 4. While creating new SQL server subclient, the proxy list is empty 5. Capacity Usage table is currently not available in License Summary Report 6. Exchange DB subclients are not visible 7. Enhancement to support network throttling Special Note: The minimum value for throttling is 128kbps. |
| 33585 | CommCell Console, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. CVD may crash on a busy firewalled setup 2. Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels. 3. sBindToInterface registry setting didn't work with hostnames (only with IPs) 4. Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks 5. Persistent tunnels were prebinding to the wrong IP on roaming laptops 6. Log browse across firewalls may hang if SSL is in use 7. CVD trying to do name to IP resolution every second 8. Log browse across firewalls may hang if SSL is in use 9. CVD trying to do name to IP resolution every second 10. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 11. Fix for CVD service not coming up sometimes. 12. Automatic scheduled jobs would not run after failing to get the job status. 13. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33569 | Base0 Client, | 1. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 2. Fix for copying servicepack.ini of unix SP 3. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 4. Copy software fails to update installer files. 5. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33504 | CommCell Console, | 1. New Images for snapvault and snapmirror. 2. Enhancement to support NetApp SnapVault and SnapMirror 3. NetApp Snap Protect Changes 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 5. Branding changes |
| 33443 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33416 | CommCell Console, | 1. Disable reports entry point for DC GUI 2. Updated Japanese translations Special Note: Localization Strings. |
| 33406 | Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Command line support for creating VSA subclient 3. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 4. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 5. Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. MySql restore fails with library load error 2. SAP/Oracle restore fails from tape copy of snap data. 3. DB2 Snap Backup fails while accessing online logs files. 4. CvMountd may crash if the network is slow 5. Utilize multiple streams during restore from Snap and Sanp Backup Copy. 6) Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. |
| 33306 | CommNet Browser, CommCell Console, | 1. New features support for Express Commcell 2. Unable to submit Restore Job from EZ Operations wizard 3. Enhancement to show Resource Pool information in Copy Properties dialog 4. Enhancement to show Resource Pool information in Media Information Report |
| 33303 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33247 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33193 | CommCell Console, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 2. Error 'Invalid Patch install Path' is displayed when user tries to change or check settings in properties for some clients. 3. Creation of Storage Policy fails if Dedup or SnapProtect license is not present in the Commserve. 4. Snap to Tape proxy drop down is not visible on the SnapProtect panel for VSA Subclient properties. |
| 33151 | Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33134 | CommCell Console, | 1. Restore from Outlook Add-in fails with Security exception 2. Restore from Outlook Add-in using "Unconditionally Overwrite targets in their original location" fails 3. Use special icon for the MUSIC,LIBRARIES,PICTURES,DESKTOP,DOCUMENTS and VIDEOS folder in the content browse dialog. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33090 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33077 | CommCell Console, | 1. Enhancement to add CommCell Console support for Dell DX Object Storage Platform and HDS HCP. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. When adding a new subclient to a client, schedule policy associations display incorrectly if a schedule policy already in use on the client is selected from the Backup Schedule dialog. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect |
| 33072 | RootOfCPUFolder, | 1. 1.custom package creation for oracle/db2 ida's on s390 platform 2. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | Base0 Client, | 1. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 2. Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete. 3. Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 4. Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit." 5. Add support for Snap Protect to the NetApp NAS iDA. 6. Added NFS Snap Protect support for Solaris Local Zone. 7. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 8. When mounting a snap do not guarantee space. 9. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 10. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 11. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 12. SAP datafile restores from Commcell GUI fails 13. SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 14. Oracle Snap Restore fails if incremental tape backup is run after the Snap. 15. Snap revert operation failing on Solaris client when mount point is in root directory. 16. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Base0 Client, CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32949 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32856 | CommCell Console, | 1. Commcell Console may reset the high water mark value to 1 if it is set to more than 1000. 2. Added ability to view the admin job history for tape catalog jobs. 3. Saving job history results from commcell console as xls or csv shows commvault.dialog.JobIdRenderer$JobIdClass@1ae13c0 in the job id column 4. FileSystem Agent with File System Archiver driver installed has two job options which are shown on the backupset property dialog. These options are "Preserve File Access Time" and "Check Archive bit during backup". Current setting for these two job options is to always default them to on, when classical scan is selected. Changing this behavior such that user can now edit these options. 5. Enable “Archive Files per BFS” when “Protect Backup Recovery Area” or “Backup ArchiveLog” is selected. 6. Instance properties dialog for SAP for Oracle iDA may not come up in GUI. 7. Cancel button on login page when SSO is being attempted may not work 8. When viewing Job History from the client node level,backup history table columns and values are mismatched. 9. Array Credentials dialog does not come up on the instance properties. 10. Commcell Console does not retain Job Controller columns selection. 11. Changing client properties may incorrectly reset the property to inherit settings from client group 12. GUI freezes when doing a push firewall from clientgroup level 13. Use special icon for the MUSIC,LIBRARIES,PICTURES,DESKTOP,DOCUMENTS and VIDEOS folder in the content browse dialog. 14. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 15. Enhancement to support ROMS license. 16. Web Console Restore does not return data after Commserver services are recycled. 17. GUI may freeze when you move between Client node and Exchange Compliance Archiver node multiple time. |
| 32762 | CommNet Browser, CommCell Console, | 1. GUI may cause an exception while browsing the commnet node after performing an "import from pod cell" operation 2. GUI may cause an exception when launching "commcell export" after performing an "import from pod cell" in case deconfigured clients exist that are hidden. 3. More clear default schedule name for "Import from podcell" import schedules. 4. Import from Podcell: Enhancement to work across a firewall Special Note: To use "Import from Podcell" across a firewall, first add the Commserve as a new client by right clicking the client node and adding the Commserve. Then configure the firewall settings for that Commserve client. In the "Import from Podcell" screeen, choose the new third option where a client can be selected. Choose the client name of the Commserve. Note: This also requires updates: TO BE ADDED!!!!! 5. Reboot option for Remove Updates is not supported and should be disabled 6. De-Configured client do not show up in client group if the "Hide De-Configured Clients" is selected. 7. Enable Find via Web Client 8. Unix Lotus Notes find and restore of mails are failing 9. When we try to create a schedule using French GUI, OK button is not clickable. 10. Subclient level data not getting updated when instance info of username/password/vcenter name is changed. 11. Browse For Datastore says "Password Cannot Be Empty" 12. "Find and Recover" from Outlook Add-In not working if the client date format is in a non US locale, User will get Application init error popup message box and find and recover window will not launch |
| 32638 | CommCell Console, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, UNIX File System iDataAgent, | 1. archiveIndex not starting on MAs Incremental backups fail in ArchiveIndex phase when there is nothing to backup. 2. Ifind goes to pending with loss of control for lotus Idas on linux-x64. 3. Taskbar icon to show status of currently running backups and information about previous backups. 4. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 5. Adds File Archiver support for new Ibrix FS. 6.) More information displayed on backup tray utility 7. Name of the current file wasn't shown in backup tray utility on UNIX 8. Total file count was not set on UNIX 9. Final job status was not passed to backup tray utility 10. Reason why new jobs cannot be scheduled was not passed to backup tray utility |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32526 | UNIX File System iDataAgent, Base0 Client, | 1. NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" 2. Unix File system backup is slow. 3. The UNIX File System backup will not backup data of a symbolic link when it is a sub-client, the "Expand symbolic links of subclient content" is checked, the symbolic link located in the root directory and it is linked with a relative path started with non-path delimiter symbols ('.' or '/'). 4. This update enables reporting of multipath devices and file system configured on multipath device mapper. 5. DC Support with Turbo FS Agent. |
| 32468 | CommCell Console, | 1. SRM Exchange Physical Devices view shows every physical disk on the machine. 2. For the File System backup agent, on the subclient properties window, the File Filters pane on the SRM Options tab may be activated even though the File Level Analytics checkbox is not checked. 3. For the File System backup agent, on the subclient properties window, the File Filter pane on the SRM Options tab for Creation Time works in the opposite way as the File Filter for Modification Time or Access Time. 4. For the File System backup agent, on the subclient properties window, the File Filter pane on the SRM Options tab for User Name or Group Name may not work with spaces. 5. 1Touch Linux: In response file Configuration screen logged in user is not getting populated it shows as dummy-user. 6. Following issues with 1-touch are fixed. 6. Unable to edit "Ethernet Device" properties. 7. Dates are not listed in sorted order. 8. Crashing EvMgrS when choosing data paths for SAP MAXDB node. 9. For Active Directory iDA, user is unable to select attributes from multiple objects for restore at the same time. 10. No way to stop loading What's New in Java Commcell Console if there no no internet connection. 11. In Capacity License Usage chart, the percentage shows bogus number when there are 6 or more digits. 12. Cannot associate any Security group for "defaultBackupSet" of Virtual Server Agent 13. Enhance browse and restore to span across cycles and subclients for Exchange Mailbox Archiver 14. Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level. 15. Remove the "Summary "Tab from the Client Comupter groups properties Firewall config tab in GUI. 16. Commcell Lockdown option for clients will show only if client is CS or MA. |
| 32245 | Base0 Client, | 1. Added support to host DC database on a central non monitored volume. |
| 32234 | Base0 Client, | 1. Net app images for some languages have incorrect images for applet launch page |
| 32134 | CommCell Console, | 1. 9.0 Build SP1 PostgreSQL iDA----> We should not drop the tables If we check the option (Don't import to server) 2. When restore Oracle control file and data and selecting "Reset Database" on restore -> Advanced -> Options tab, the following error message is displayed: "Cannot select both "NO CATALOG" and "Reset Database". 3. Enable VSS option not showing on windows 7 32 bit OS 4. Unable to do Point-in-time restores between two cycles for SQL agent. |
| 31873 | CommCell Console, | 1. Script created by "save as script" during "Import from Pod Cell" may fail to create the schedule on the source. 2. When saving the export schedule as a script, the 'Import from Pod cell' wizard may exit prematurely without asking all questions. 3. Allow relative time selection for "import from pod cell" captures. 4. Outlook Add-In Find and Recover may fail to launch. 5. The option 'Create a New Snapshot copy ' is not available for a Storage Policy using a NAS Attached Library. 6. "Run backup copy" operation is missing in SP level for a Primary copy which is created with NAS attached library. 7. Multiple fixes to support Snap protect for NAS IDA 8. Remove "Use proxy" of subclient snap protect operations for NAS NDMP snap protect feature. 8. Show only "Netapp" snap engine in the Available Snap Engine drop down list for NAS NDMP Snap protect feature 9. SnapProtect feature should not be available for celerra or any filers other than NetApp. 10. In Array management window, NetApp is default Snap Vendor 11. Remove "Use Source if proxy unreachable" of subclient snap protect operations for NAS NDMP snap protect feature. |
| 31825 | Base0 Client, | 1. Linux 1-Touch GUI does not save the disk information after mapping is done |
| 31806 | Base0 Client, | 1. Laptop Backup install support for unix install |
| 31797 | CommCell Console, | 1. Updated help content for CommCell Console |
| 31761 | Pre-PostInstall, CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, UNIX File System iDataAgent, Base0 Client, | 1. Fixed a condition where Install and Uninstall Software could fail without reason. 2. Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID. Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. 3. Unable to recall stub files after deleting the subclient. 4. Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store. 5. In certain cases, creation of storage policy pointing to a global deduplication policy fails. 6. Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console 7. SRM FLA Filters are not working when User Name or Group Name contains spaces. 8. Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. 9. NAS Backup is failing in round-robin scenario 10. Support for 1Touch ResponseFile configuration. 11. EvMgrC does not start after installing 9.0 SP1. |
| 31737 | UNIX File System iDataAgent, Base0 Client, | 1. Send Log Files operation from CommServ console when run on Unix clients does not gather galaxy log files. 2. Enhanced File System IDA to support archiving. 3. Enhanced File System IDA to support archiving. 4. EvMgrC failing to start on Mac OS X. |
| 31660 | Base0 Client, | 1. Enhancement to allow end users to browse via Web console 2. QSDK crashes on running multiple On Demand Backups from command line. |
| 31649 | UNIX File System iDataAgent, CommCell Console, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. Job management from mobile devices. 2. Taskbar icon to show status of currently running backups and information about previous backups. |
| 31610 | CommNet Browser, CommCell Console, | 1. New Images for Netapp OEM 2. Disable or hide VSS metadata option from job options 3. Help link may not work for advanced discover dialog of external data connector for TSM 4. Enhancement to support SharePoint Database backup and restore of individual sites. 5. Exchange database subclient may have duplicate content if a configuration change is canceled. 6. snapvault and snapmirror support Help URL 7. Enhancements to support 1-Touch Response file One touch restore file changes 1.Export of file to local disk 2.Editing restore File |
| 31570 | Base0 Client, | 1. cvlaunchd leaks memory |
| 31563 | CommNet Browser, CommCell Console, | 1. Help may not work correctly for "License Usage" tab for "License Administration" dialog 2. Enhancement to allow end users to browse via Web console 3. Laptop Backup push install support for Windows/Unix/Mac 4. Enhancement to allow setting machine owners on the client properties 5. From the client property dialog, user should be able to associate a backup set with a subclient policy. 6. Enhancement to allow exchange mining from VSA snaps 7. Enabled "Software Compression" option for NAS |
| 31499 | Base0 Client, CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, | 1. Backup might fail when too many jobs are run. 2. GXHSMService crashes during service shutdown or service restart. 3. Support unix intermediary media agents for pod cell imports. 4. Fixes folder deletion warning during deconfiguration of Dell DX6000 and other Object based cloud library mount path. 5. Automatic schedule support for laptop and desktop backup. |
| 31447 | CommCell Console, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, Base0 Client, | 1. Notify GUI Server Developers: Item [^10] missing from cvEncode. should not be visible in GUI. 2. Enhancement to support Dell DX Object Storage Platform and HDS HCP. Special Note: Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data. Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file. 3. Fixes occasional CvMountd crash on Unix MediaAgents. 4. Enhancement to allow exchange and sharepoint mining from VSA snaps 5. Support for laptop and desktop backups Fix for cluster upgrades for missing DB package rows. Support for Unix Turbo File System |
| 31425 | UNIX File System iDataAgent, Base0 Client, | 1. GXHSMService dumps core during service shutdown. 2. Enhanced File System IDA to support archiving. |
| 31353 | CommCell Console, | 1. Scheduling of "Review set Activity report" may give error "Please select a webServer". 2. New option in Commcell configuration report to show index cache content information Special Note: This update needs to be installed with the update form 07469 3. SRM enterprise storage aggregate report might show inappropriate tooltip. 4. In subclient properties for the File System agent, SRM Options tab, the File Filters for User Name and Group Name may not work if they have single backslashes. 5. Under a Unix client, Storage Devices node, Volume Groups in the General section of a single storage device may display incorrect information. 6. User name string text change in TSM instance Property dialog 7. Remove the exclusive constraint of 'Embed the recall link into body' and 'Leave Behind Message Body' Archiving Rules for Exchange Mailbox Archiver. 8. Creation of new subclient for Exchange Database agent does not show available proxies for Snap Protect 9. Exact index option is no longer supported and is removed from the gui GUI update for SRM support for NAS NDMP Agent. 10. GUI update for SRM support for NAS NDMP Agent. 11. Enhancement to allow archiving on file system agent 12. Exchange Database restore failing with 'No Backup data' found 13. Add/Remove Software option is missing for Logical Clients 14. Gui Changes related to Laptop Backup 14. Ability to add additional subclient content when the client or backupset is associated with subclient policy. 15. Ability to define user specific content such as my documents, my videos, my music to subclient content. 16. Redesigned automatic scheduler options 17. Install update support for Automatic scheduler 18. Added new Automatic scheduler option "stop task if battery mode begins" 19.. Do not show disk space usage option for install update schedule. 20.. Snap Backup and archiving option for File system cannot be selected together. 21.. Data Class Set should be disabled for windows and unix File Systems |
| 31329 | Base0 Client, CommCell Console, Resource Pack, Resource Pack Limited, Resource Pack Internal, CommNet Browser, | 1. Enhancement to support Dell DX Object Storage Platform and HDS HCP. |
| 31327 | Base0 Client, | 1. Job Pending reason is not correct when client side dedup backup is
attempted to an upgraded 8.0 DDB.
2. Restores from re-encrypted copy may fail if the Auxilliary copy operation
was performed using a Unix MediaAgent with 'Optimize for concurrent LAN
Backups' option turned off.
3. Backup might fail when too many jobs are run.
4. Enables the "Variable Content Alignment" feature
5. SQL transaction log backup may fail with error "The control process for the
previous phase is still running. PID [ |
| 31283 | Base0 Client, | 1. Adding VCS specific scripts required for installation. |
| 31222 | CommCell Console, | 1. ESX Browse tab should not be available for Xen and Hyper V 2. When there is no Capacity License available the chart does not show the correct license usage. 3. Text changes to the commcell export/import GUI 4. Enable Intermediatory media agent option in 'Import from pod cell' option 5. Other miscellaneous fixes for 'Import from podcell' feature. 6. Add Variable Content Alignment option on the Client properties. 7. Should be able to browse the client during a mount operation for the "List Snaps" feature from the copy and Array Management nodes. 8. Show the Option "Mark Files Read Only" on Cloud Libraries. 9. Not able to enable SILO on a new SP created after upgrade to an 80 MA. 10. On an upgraded CS, a storage policy copy pointing to an older DDB can incorrectly still have store reconstruction options set. 11. Deduplication policy should not be created with an invalid DDB path. 12. Enhancement to allow backup of Deduplication database. 13. Tape catalog save as script may fail to save the script. 14. Admin job history ->resubmit, Schedules->edit operation fails for tape catalog job. 15. Tape catalog job types can now be selected when getting the admin job history. 16. Catalog option at drive level for stand alone tape showed even if a media was already cataloged. |
| 31209 | UNIX File System iDataAgent, Base0 Client, | 1. GXHSMService crashes during recalls on a host with only VM (no PM) installed. 2. Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails. 3. Mount of the HDS snap is failing on partitioned device. 4. Snap reverts fixes for HDS Snap Engine. 5. Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) 6.. Hide TSM admin passwords in logging. 7.. JPR for incorrect login/password. 8.. Unix Netapp NFS Snap protect support SILO DDB restore fails to restore DDB files. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 9.) Integrated install and File System IDA with Unix VERITAS Cluster. 10.) Enhanced File System IDA to support archiving. 11.) SILO DDB backup fails to backup DDB files. 12.. Discover job merge failure when XML files are collected with decoupled database capture. |
| 31175 | Base0 Client, | 1. Improves HPUX dedup backup performance. |
| 31140 | Base0 Client, | 1. Ability to run snap backup from qcommand followed by movement to tape job 2. qcommand.log may log passwords when using qoperation execscript command with password inputs 3. QSDK.log log login credentials at default logging level. |
| 31123 | Base0 Client, | 1. Installation of Filesystem Agent Fails on Freebsd 7/8 amd64 |
| 30975 | CommCell Console, | 1. Differential backup option for MySQL has been removed as it is no longer supported. 2. Full VM Restore fails to get the password if Override default selection option is unchecked for restores to clients earlier than 9.0 3. Browse and restore from client and agent level is not showing appropriate dialog for CDR 4. Virtual Machine summary details are not displayed when reached from either the client node under client groups, or from the client in the client list. 5. Changes to Notes DB/DOC/DM configuration may not get saved. 6. Exception when clicking on "Advanced" button for EDC discovery 7. In Billing Configuration, associating Billing Departments to Virtual Server entities is not saved. 8. Master server Name is not same as EDC Instance Name. 9. Sybase subclient may fail to save database if number of selected databases are higher than 150. 10. Enhancement to customize the "Recovered Items" folder name during "Find and Recover" operations from Outlook Add-In. |
| 30926 | Base0 Client, | 1. QSDK crashes on running multiple On Demand Backups from command line. |
| 30600 | CommNet Browser, CommCell Console, | 1. Subclient property dialog shows scroll bar on a low resolution screen 2. A. When Capacity License is over capacity, the RESET button stays enabled even after clicking it many times. B. License Usage chart always show "1000sed" in the footer even though the actual usage is over 100%. 3. Browse between different Timezone changes the date back a day and an hour. 4. Column values for Find results of LN Doc maybe mismatched when some o the values are empty 5. Browse from webUI for emails shows the meta data folder 6. Exception while opening License admin screen after applying capacity based license. 7. Performing Restore after Find from Outlook addin throws exception 8. Find and Recover does not honor client selection in Browse window 9. The banner image for commcell console for Simpana Express is cut off |
Update No. |
Installed On |
Description |
| 34715 | Documentum iDataAgent, SAP for MaxDB, Oracle iDataAgent, SAP for Oracle, | 1. Sap/Oracle command line backup may fail intermitently. |
| 34714 | MediaAgent, | 1. Backup and reconstruction of Deduplication Database may fail. |
| 34681 | Media Explorer, Base0 Client, | 1. Restore Enhancements for VMware. 2. Documentum restores fail after installing SP1b 3. CVMA occasionally crashing on index cleanup |
| 34680 | Media Explorer, Base0 Client, | 1.) DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2.) Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3.) Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34661 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Media Explorer, Base0 Client, MediaAgent, | 1. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 2.. Supports Conversion of 8.0 version of DDB to 9.0 version. 3.. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34646 | MediaAgent, | 1. When CS and MA are different machines, Tape Catalog job may cause a CVMountd crash. 2.. Robo offline source CS import via MA may fail to copy dumps to GRC cell. 3. Enhancement for Dell disk array configuration. |
| 34639 | Documentum iDataAgent, Oracle iDataAgent, | 1. Oracle control file restore fails with error "Database not in STARTED mode". |
| 34636 | Documentum iDataAgent, DB2 iDataAgent, | 1. DB2 log manager stops archiving logs when previous Log retrieval fails. 2. DB2 Backup fails when performance satistics is enabled with registry key. |
| 34610 | File System NDMP Restore Enabler, MediaAgent, | 1.. Customer backs up their data using a Unix MediaAgent. Customer content indexes data using a Windows MediaAgent. Customer does a compliance search, selects a file to restore and this kicks off a restore. This restore completes successfully, the data ends up in the location where it's supposed to, but the compliance search gui reports the operation failed with an X in a red circle. In short everything seems to work, but it's reporting failure. 2.. Power restores for NAS data fail if a firewall is active between the webserver and the commserver. 3.. Restore to windows of files located in very deep directories fail if the full path of the filer exceeds 256 characters. 4.. Content Indexing jobs for large NetApp backups are failing. |
| 34585 | UNIX File System iDataAgent, Image Level iDataAgent, Image Level ProxyHost iDataAgent, Media Explorer, Base0 Client, | 1. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 2. SILO backup job goes to pending due to scan failure. 3. Directories specified in the exceptions list not being backed up. 4. Failed files are not added into next incremental backup. 5. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 6. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 7. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Media Explorer, Base0 Client, | 1.. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2.. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Base0 Client, | 1.) Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2.) CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34542 | Media Explorer, Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, | 1. Media Agents goes offline intermittently due to registry permission issues. |
| 34538 | Serverless Data Manager, Media Explorer, Base0 Client, Resource Pack, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. 2. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 3. DB2 snap multistream restores may get stuck trying to detect SCSI devices 4.) Snap Protect backup fails when HDLM multipath is configured on Linux. 5.) Adding support for agile addressing on HP-UX |
| 34526 | Media Explorer, Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2.. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3.. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34520 | File System Filter Driver, | 1. Solaris File Scan takes longer. 2. Solaris File Scan takes longer. 3. Application writes to an NFSv4 share being monitored by CDR can cause kernel panic. |
| 34512 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Media Explorer, Base0 Client, UNIX File System iDataAgent, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34504 | Lotus Notes Document iDataAgent, Domino Mailbox Archiver Agent, | 1. Received Time show 1970-1-1 8:00:00 in web search GUI when displaying notes mail 2. Restore of Database by Lotus Notes Document iDataAgent corrupts the database on Solaris and AIX platforms 3. Emails are not restored in Inbox on Linux platform |
| 34485 | Image Level iDataAgent, Image Level ProxyHost iDataAgent, UNIX File System iDataAgent, MediaAgent, File Archiver for UNIX Agent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, DB2 iDataAgent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34473 | Media Explorer, MediaAgent, | 1. Restore from NAS auxilliary copy may fail with "no more chunks in last archive file, ending restore." 2. Auxilliary copy for NAS direct attach tape drives using hardware encryption fails with an error reading from the source tape. 3. 1). Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table". 2). Auxcopy may fail with error "Cannot get encryption keys for archive file NNNN", if the source copy is done with encryption and Store-Priming operations. 3). After Commcell Migration, Restore/Auxilliary copy of the migrated data on a local commcell policy (Local Mount Path) may fail. |
| 34451 | Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34413 | Base0 Client, | 1. Failure of cvsnap when device mounted from a solaris local zone 2. Adding support for native VxVM snapshots on Solaris. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Predictor for Continuous Data Replicator, Resource Pack, Base0 Client, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Simpana startup script failure 2. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 3. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 4. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, Media Explorer, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Base0 Client, | 1.. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2.. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3.. Firewall related binaries are not packaged for 64bit platforms 4.. Tunnels may not failover in cluster firewall environment |
| 34380 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Fix for updating baseline of SP1a on GUI 13. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 14. Fix for removing numbered update, that has an update number partially matching with another package 15.. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 16.. Partial enhancements for RemoveUpdates to expire old updates. 17.. Added support in update installer to wait for sidb process. |
| 34352 | Media Explorer, Base0 Client, | 1.. Snap mount operation failing. 2.. Snap operation failing on multipath devices on Linux platform. 3.. Snap mount failing on SuSE 11 4.. Unmount failing during Oracle RMAN Snap to tape backup. 5.. Mount of SAP/Oracle backup volumes failing. 6.. Snap is failing on Linux when file system mounted using device name /dev/dm-*. |
| 34327 | DB2 iDataAgent, Image Level iDataAgent, Image Level ProxyHost iDataAgent, SAP for MaxDB, Continuous Data Replicator, UNIX File System iDataAgent, File Archiver for UNIX Agent, Documentum iDataAgent, SAP for Oracle, Oracle iDataAgent, Base0 Client, Media Explorer, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. Utilize multiple streams during snap backup copy and restore from snap. 4. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 5. Archiver fails in Stubbing phase. 6. Active Directory browse fails to show items after running synthetic full. 7.. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 8.. Support for switch database mode GUI option for Oracle snap restores 9.. SAP restore Job progress fix for multi-stream restores |
| 34317 | Media Explorer, Base0 Client, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34288 | MediaAgent, | 1. iSCSI support for HPEVA and LSI arrays. 2. Exchange Database snap protect job may fail in copy operation on HP EVA or LSI array. |
| 34275 | Documentum iDataAgent, Media Explorer, Base0 Client, Oracle iDataAgent, SAP for Oracle, File Archiver for UNIX Agent, | 1. Image File level restore fails on 32/64-MA if File System is not installed on the MA |
| 34274 | File Archiver for UNIX Agent, | 1.) Errors reported by cxfs_upgrade are now logged and will not cause the archive job to fail after an upgrade. 2.) cxfs_upgrade -f option added to allow manual upgrade of individual files in the case of failures. 3.) Minor fix in usage message. |
| 34187 | Data Classification Enabler, | 1. Communication to DataClassification Service fails when firewall is configured |
| 34108 | RootOfCPUFolder, | 1.. Added support for recording unix group/other user's access 2.. Added support for 64bit installs via reduced/native packages 3.. Custom package creator to not show all OEM brands. |
| 34100 | Media Explorer, Base0 Client, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34097 | DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, File Archiver for UNIX Agent, MediaAgent, Image Level iDataAgent, Image Level ProxyHost iDataAgent, Pre-PostInstall, Resource Pack, Base0 Client, Predictor for Continuous Data Replicator, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 2. DB2 Incremental backup throughput is affected by archive logs inclusion in backup image. Special Note: Please set the following registry key to Yes under Db2Agent/.properties on DB2 client machine. SKIPLOGSINBKPIMG Yes 3. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 4. FileSystem Backup Jobs pending with error code [82:156] |
| 34092 | MediaAgent, Documentum iDataAgent, SAP for Oracle, Oracle iDataAgent, Base0 Client, Media Explorer, | 1. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 2. Snapprotect should pick pre-established bcv mirrors and incrementally establish before splitting the bcv 3. Registry hook to use pre-masked devices during mounting and leave them masked during unmounting for EMC symmetrix Special Note: On proxy machine registry key "nDisableConfigChange" when present under "iDataAgent" and set to 1 uses pre masked BCV for mounting. 4. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server." 5. Snap backups would fail when symmetrix device numbers for source disks exceeds 999 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 8. Mount for raw device may fail on AIX and Sun due to conversion. 9. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 10. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 11. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 12. Support SnapProtect for VMAX Symmetrix Array. |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Media Explorer, Base0 Client, | 1. Dedupe not working for Synthetic Full backups 2. DB2 Backup fails with library load error on AIX. |
| 34007 | MediaAgent, | 1. Fixes issue where application data size displayed is much greater than actual backed up data size, when there are lots of sparse files or Archiver stubs in subclient |
| 33987 | Continuous Data Replicator, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33984 | Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33939 | Sybase iDataAgent, | 1. Support for Sybase backup and restores in a firewalled environment |
| 33906 | MediaAgent, Base0 Client, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. DASH Auxilliary Copy job may go to pending with job pending reason: Cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported. 6.. Content Indexing job read failure from a chunk created by a suspended backup job on a Hardware single instance target. 7.. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. 8.. Prunable data on disk associated with DeDup storage policy may not be removed due to registry lookup failure. 9.. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 10.. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. |
| 33878 | Base0 Client, Media Explorer, SAP for Oracle, | 1. Enhancement for VSA restore changes. Support for additional parameters during restore. 2. End User Search capability for Outlook Add-In Users 3. Read Ahead NAS backup options may not be available after upgrade to 9.0 4. Store additional metadata in index for virtual server agents 5. Capacity Usage table is currently not available in License Summary Report 6. Protected files report show incorrect file size. 7. Virtual Server Agent browse may fail when number of volumes in a virtual machine is greater than 20 8. Exchange Mailbox Archiver stub recalls may fail if user's smtp address has a case change in the middle of a cycle. 9. Browse fails after upgrading Media agent to 9.0 10. Commcell console does not allow selection of restore only exchange MB agents 11. Server side changes for enhanced VSA restores. |
| 33737 | UNIX File System iDataAgent, Data Classification Enabler, | 1. Incremental backups using DC on HP-UX backup all the data. Incremental FS scans with reference time less than the DC DB creation time should fall back to regular scan. 2. UNIX DC install will fail if FS IDA is already installed and patched to SP1a. |
| 33672 | MediaAgent, Base0 Client, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33615 | Media Explorer, Base0 Client, Image Level iDataAgent, Image Level ProxyHost iDataAgent, | 1. Backup of Image Level on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow 2. CVD crashes when I try to detect Volumes with Volume Explorer. The issue happens wnen there is an extra folder under /dev/rdsk. 3. Restore of 3TB volume with 90 percent of the capacity used is found to be corrupted after restore. 4. Failure to detect all devices using volume explorer on redhat6.0. |
| 33585 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Media Explorer, Base0 Client, | 1. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 2. Fix for CVD service not coming up sometimes. 3. Automatic scheduled jobs would not run after failing to get the job status. 4. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33578 | Lotus Notes Database iDataAgent, | 1. Restore All Version of database for Lotus Notes Database iDataAgent fails on UNIX platforms |
| 33569 | Base0 Client, | 1.. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 2.. Copy software fails to update installer files. 3.. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33531 | Domino Mailbox Archiver Agent, | 1. Unnecessary persistent recoveries are kicked off on cluster Domino nodes.
CvlnDMHook log not getting rolled over.
Special Note:
Domino server need to be restarted after applying the update.
Registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\AvoidInvalidRecalls" needs to be set to prevent persistent recoveries during stubbing. Valid values for this key are 0 or 1. An optional registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\StubbingDelay" defines time in seconds, after stubbing, during which persistent recoveries will not be allowed. Absence of this key will default the value to 120 seconds (2 minutes). This update contains logs rollover functionality along with the resolution to prevent unnecessary persistent recovery. Following are the registry keys for configuring log roll over: "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\LogFileSize" Defines size in MB. (For eg, if user set its value to 10, maximum size of log file will be 10MB). If key is not present the size will default to 5 MB. "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\NumLogFiles" Defines number of files to keep for roll over (History). Absence of key defaults this number to 5. With the default values of the keys, system will maintain a total of 25 MB size of logs. The log files will have "_n" appended to the original file name with cvlnDMHook.log_1 being the latest rolled over log file. All the above-mentioned registry keys are DWORD values. For Unix platforms, log roll over registry keys are following parameters in notes.ini file: CvLogFileSize and CvNumLogFiles. Behavior and valid values for these parameters are same as above mentioned Windows registry values. |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33486 | MediaAgent, | 1. Backup Copy of Virtual Server Snap fails in mounting of snap |
| 33443 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33411 | UNIX File System iDataAgent, | 1. AIX 1-Touch backup failing on a systems with disabled Volume Groups.
2. AIX 1-Touch backup failing when NIM network is used with Gigabit
Ethernet-SX PCI-X Adapter
Special Note:
The 1-touch backup will fail when one or more in-active volume is
present. To get successful 1-Touch backup, use the following registry to
skip the inactive volume groups.
Registry path :
/etc/CommVaultRegistry/Galaxy/ |
| 33406 | Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Base0 Client, | 1. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 2.) Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 3.) Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | DB2 iDataAgent, File Archiver for UNIX Agent, MediaAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Media Explorer, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. DB2 Snap Backup fails while accessing online logs files. 3. CvMountd may crash if the network is slow 4. Utilize multiple streams during restore from Snap and Sanp Backup Copy. 5. Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. 6. Random file-level restore failures from Image backups on AIX. |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33205 | External Data Connector, | 1. Vsa snap mining provider and mining changes. 2.. Support for TSM 6.2. 3.. Support for the migration of TSM Enhanced Schedules. 4.. Support for Tsm output files with unix format. 5. VSA Mining client side changes 6. Adds support for VMware Application Level quiescing when using ESX 4.1 and Windows 2008 r2 7. Sometimes discovery process is failing during processing magnetic libraries list |
| 33151 | Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33072 | RootOfCPUFolder, | 1.. 1.custom package creation for oracle/db2 ida's on s390 platform 2.. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | MediaAgent, Media Explorer, Base0 Client, | 1. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 2. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Media Explorer, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32980 | MediaAgent, | 1. Hardware snap creation will get failed if more than 2 filers configured in array management screen. Special Note: In New XCLI installation on VSA proxy scenario use below registry key to avoid reboot to set XCLI tools path. "'iDataAgent\XCLI_BINARY_LOCATION'" and set the value to install path of xcli example: "C:\Program Files (x86)\XIV\GUI10" |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32962 | SAP for Oracle, Media Explorer, Continuous Data Replicator, Base0 Client, | 1.. Added NFS Snap Protect support for Solaris Local Zone. 2.. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 3.. When mounting a snap do not guarantee space. 4. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. SAP datafile restores from Commcell GUI fails 7. SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 8. Oracle Snap Restore fails if incremental tape backup is run after the Snap. 9. Snap revert operation failing on Solaris client when mount point is in root directory. |
| 32951 | Base0 Client, Media Explorer, MediaAgent, | 1. Fix for Virtual server iDA point in time restores from snap backups 2. createIndex sometimes fails with index moved between different MA machine architectures 3. image level iDA file browse fails on sparc solaris 64 bit media agent 4. Browse enhancements for exchange mailbox archiver agent to show all stubs within a given time range. 5.. Archiver jobs fails after upgrading CS and MA to 9.0 and when data was erased through Browse prior to upgrade. 6. Initial backups might fail going to upgraded MA from 8.0 to 9.0 with grid store enabled and index cache server configuration. |
| 32949 | Media Explorer, Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32945 | Media Explorer, Base0 Client, MediaAgent, | 1. Auxcopy process may crash intermittently when dedup read ahead feature is active 2. DeDup Reconstruction job may fail in the [Add Records] phase. 3. Auxiliary Copy operation from DeDup enabled storage policy copy may fail if look ahead read is enabled. 4. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. |
| 32909 | Base0 Client, | 1. Enable HDS ShadowImage differential resynch for HDS SnapProtect. Special Note: To enable the fix in this update, create the following DWORD value under the EventManager section of the Client registry: CVHDS_USE_DELETED_SHADOWIMAGE and set the value to 1. 2. Unmount is reported as failed from HDS Snap Engine even if it is successful. Special Note: Stop the services before applying this update |
| 32876 | QSnap, | 1. Scripts to create or delete cxbf devices. |
| 32695 | DB2 iDataAgent, Documentum iDataAgent, Oracle iDataAgent, SAP for Oracle, Media Explorer, Base0 Client, | 1. SAP/Oracle restore fails from tape copy of snap data. |
| 32638 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Image Level iDataAgent, Image Level ProxyHost iDataAgent, Media Explorer, Base0 Client, | 1. Adds File Archiver support for new Ibrix FS. 2.) Name of the current file wasn't shown in backup tray utility on UNIX 3.) Total file count was not set on UNIX 4.) Final job status was not passed to backup tray utility 5.) Reason why new jobs cannot be scheduled was not passed to backup tray utility 6.) More information displayed on backup tray utility |
| 32539 | Base0 Client, | 1. Fibre Channel card not detected on Solaris OS setup with multiple Fibre Channel cards. |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32526 | File Archiver for UNIX Agent, UNIX File System iDataAgent, SRM UNIX File System Agent, Base0 Client, | 1. This update enables reporting of multipath devices and file system configured on multipath device mapper. 2. DC Support with Turbo FS Agent. |
| 32499 | NDMP Remote Server, | 1. NAS iDA dedup rate is not good when using compression with dedup. 2. Restore from NetApp NDMP job appears to hang. Problem occurs when the file server requests a read from a past offset. |
| 32384 | UNIX File System iDataAgent, Data Classification Enabler, | 1. DC Performance Enhancements Special Note: This update will rebuild DC Databases for all volumes linux_9.0.0B84_31906 and hp_9.0.0B84_31907 are pre-requisites |
| 32297 | MediaAgent, | 1. New media are not detected after adding the media to the magazine for some libraries. |
| 32278 | External Data Connector, Informix iDataAgent, Sybase iDataAgent, File Archiver for UNIX Agent, DB2 iDataAgent, Image Level iDataAgent, Image Level ProxyHost iDataAgent, Resource Pack Limited, Resource Pack Internal, Predictor for Continuous Data Replicator, Documentum iDataAgent, SAP for MaxDB, Oracle iDataAgent, SAP for Oracle, Continuous Data Replicator, Serverless Data Manager, Pre-PostInstall, Lotus Notes Database iDataAgent, Domino Mailbox Archiver Agent, Lotus Notes Document iDataAgent, MySQL iDataAgent, Base0 Client, UNIX File System iDataAgent, MediaAgent, Media Explorer, Resource Pack, | 1. DDB reconstruction fails. 2. Two library were missing from CVGxBase0 package. 3. GXHSMService dumps core during service shutdown. 4. ScanScsiTool was missing from 32-bit Media Agent Package on Linux. 5. Move tape_tool from Media Explorer package into Resource Pack (CVGxRP) for all Unix. 6. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 7. DDB simulation tool hangs when multiple simulations are attempted in parallel on the same machine. 8. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 9. Sybase database discovery hangs for instance with many databases. 10. In browse and restore, when parent directory is selected for restore, checking for delimiter in the path is throwing exception and also when we get data from multiple archive files, calling initgroups second time throws an error. 11. Invalid bin log (data) path specified in Instance creation causes data loss. 12. Fix for copying servicepack.ini of unix SP 13. MySQL backup goes into pending state 14. Improves HPUX dedup backup performance. 15. NAS iDA backups to a tape drive on a NetApp file server are failing in the archive index phase with an error indicating "an internal software error occurred". Failure happens when using ONTAP 7.3.3 and IPv6 is not configured on the MediaAgent. 16. DB2 agent restores all log files with the matching sequence number. 17. Enhancement to allow marking backup files as read only for cloud devices that supports retention locking. 18. Enhancement to support Dell DX Object Storage Platform and HDS HCP. 19. Lotus Notes Document agent restores and Data MIgrator recalls are failing on domino 64 bit running on AIX64 . 20. Enhanced File System IDA to support archiving. 21. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. 22. SDR may restart processing from the beginning in case of network errors instead of from the point where the error occurred. 23. Dedup backups to dedup storage policy may stop working with the error: "Failed to start a transaction" 24. Discovered Netbackup exported media are not shown in the media information report 25. Support Pre-deployment survey for external data collector. Special Note: Refer to online document External Data Connector Pre-Deployment Survey. 26. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 27. Snap creation may fail for HP EVA based SnapProtection feature, if source volume UUID and WWN values are different. 28. Unmap of the snapshot/clone may fail if the host group with multiple FC initiator ports configured on HP EVA or LSI storage array. 29. Failure in recurring log restore when only single db is restored. 30. Index restore crashes during virtual server incremental backups 31. Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get array info. Please enter array info from Array Management" 32. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 33. Support for TSM version 6.1.3 34. Command line support for creating VSA subclient 35. Oracle, DB2, Informix and Sybase Backup/Recovery support for Dedupe with Variable content alignment(VCA). 36. Add support for Snap Protect to the NetApp NAS iDA. 37. Special characters in the data cause SRM Data Collection jobs to fail. 38. CDR may not be able to return to replication if a pair is aborted, permissions of some files are changed on destination and the pair is restarted again. Fix for installing CDR on sol2.9 39. Fix for Fastpass discovery job running CVForeignHandler.exe module at 100% CPU. 40. Laptop backup progress indicator isn't showing throughput or amount of transferred data. 41. Log Restore by LSN range fails on HP-UX IA64 42. Install updates on solaris2.8/2.9 |
Update No. |
Installed On |
Description |
| 34715 | Oracle iDataAgent, | 1. Sap/Oracle command line backup may fail intermitently. |
| 34714 | MediaAgent, | 1. Backup and reconstruction of Deduplication Database may fail. |
| 34681 | Base0 Client, Media Explorer, | 1. Restore Enhancements for VMware. 2. Documentum restores fail after installing SP1b 3. CVMA occasionally crashing on index cleanup |
| 34680 | Media Explorer, Base0 Client, | 1.) DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy. 2.) Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected. 3.) Backup jobs with Client-side Deduplication may fail if client is behind a firewall. 4. Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled. |
| 34661 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, MediaAgent, | 1. Intermediately job manager service hangs while trying to start jobs to lot of unreachable client across firewall. 2.. Supports Conversion of 8.0 version of DDB to 9.0 version. 3.. Fixes the issues with the installation of updates for DDB engine while the DDB backup is in progress. |
| 34646 | MediaAgent, | 1. When CS and MA are different machines, Tape Catalog job may cause a CVMountd crash. 2. Robo offline source CS import via MA may fail to copy dumps to GRC cell. 3. Enhancement for Dell disk array configuration. |
| 34639 | Oracle iDataAgent, | 1. Oracle control file restore fails with error "Database not in STARTED mode". |
| 34610 | MediaAgent, | 1.. Customer backs up their data using a Unix MediaAgent. Customer content indexes data using a Windows MediaAgent. Customer does a compliance search, selects a file to restore and this kicks off a restore. This restore completes successfully, the data ends up in the location where it's supposed to, but the compliance search gui reports the operation failed with an X in a red circle. In short everything seems to work, but it's reporting failure. 2.. Power restores for NAS data fail if a firewall is active between the webserver and the commserver. 3.. Restore to windows of files located in very deep directories fail if the full path of the filer exceeds 256 characters. 4.. Content Indexing jobs for large NetApp backups are failing. |
| 34585 | UNIX File System iDataAgent, Base0 Client, Media Explorer, | 1. Scan on large file system takes longer when multiple streams/readers configured for the sub-client. 2. SILO backup job goes to pending due to scan failure. 3. Directories specified in the exceptions list not being backed up. 4. Failed files are not added into next incremental backup. 5. File system scan phase not reporting error when disk space is not sufficient to process all collect files. 6. UNIX File System backup job reported as "completed with errors" when Galaxy files don't exists or directory can't be open with access permission error. 7. In case of laptop backups, job results directory will not be backed up. |
| 34569 | Base0 Client, Media Explorer, | 1.. Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes" 2.. Throttling configuration may cause creation of routes in a client's FW config toward itself |
| 34548 | Base0 Client, | 1. Commserver services may be unresponsive due to unresolvable client names in firewall configuration. 2.) CVFWD may overlook a change in ipconfig, which will result in loss of connectivity for roaming laptops. |
| 34542 | Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, | 1. Media Agents goes offline intermittently due to registry permission issues. |
| 34538 | Base0 Client, Resource Pack, Media Explorer, | 1. Unable to detect/configure devices through Library & Drive Configuration tool on an AIX MediaAgent using LPAR. 2. Simpana may attempt to communicate with SCSI devices that have been disconnected or are in error state on HP-UX. 3. DB2 snap multistream restores may get stuck trying to detect SCSI devices 4.) Snap Protect backup fails when HDLM multipath is configured on Linux. 5.) Adding support for agile addressing on HP-UX |
| 34526 | Media Explorer, Base0 Client, | 1. Enhancement to optionally skip catalog phase for NAS snap backup 2.. Data Retention Forecast and Compliance Scheduled Reports may not show any data 3.. Upgraded backup schedules may not have correct catalog server option 4. Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. |
| 34512 | Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, | 1. Enhancements to the wild card content functionality for file system agents 2. Support for Non-Interactive Restore recovery for Windows. |
| 34485 | UNIX File System iDataAgent, MediaAgent, Base0 Client, | 1. Support for Linux file level restores to Linux Image iDA. |
| 34473 | Media Explorer, MediaAgent, | 1. Restore from NAS auxilliary copy may fail with "no more chunks in last archive file, ending restore." 2. Auxilliary copy for NAS direct attach tape drives using hardware encryption fails with an error reading from the source tape. 3. 1). Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table". 2). Auxcopy may fail with error "Cannot get encryption keys for archive file NNNN", if the source copy is done with encryption and Store-Priming operations. 3). After Commcell Migration, Restore/Auxilliary copy of the migrated data on a local commcell policy (Local Mount Path) may fail. |
| 34451 | Base0 Client, | 1. File System backup intermittently does not report failed files and correct job status. |
| 34407 | RootOfCPUFolder, | 1. Fixes issues that a rollback of a failed install could also remove some common binaries used by existing subsystems. |
| 34395 | RootOfCPUFolder, | 1. While creating custom package, Service pack and loose updates in the DVD should be packaged only for user selected subsystems.If user specifies linux-glibc2.3, Current behavior packages complete linux SP and loose updates. Enhanced to copy only for linux-glibc2.3 |
| 34392 | Resource Pack, Base0 Client, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Simpana startup script failure 2. Simpana startup script failure 3. When you run install of any driver ida to an existing instance on Unix and if install fails for any reason, the services of instance will not come up saying "failed to load driver" even though driver install was not successful and rolled back. 4. Unix Galaxy services are ignoring group and umask settings provided during installation. Special Note: When running application IDAs (for example Oracle IDA), make sure Simpana installed with appropriate group or permissions for others is set to read-write-execute. 5. Simpana services may not start after SP1b installation if 33614 was installed ahead of SP1b. |
| 34390 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, Base0 Client, | 1.. cvfwd may crash or leak memory when bombarded by incoming SSL tunnel connection requests 2.. Can't install Galaxy on a 64-bit HP PA-RISC firewalled machine 3.. Firewall related binaries are not packaged for 64bit platforms 4.. Tunnels may not failover in cluster firewall environment |
| 34380 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, | 1. Added support to install updates on x64 FreeBSD 7. 2. Fix for installing additional auto updates on solaris 3. Support for installing updates on LNDMAgent. 4. Install update for another applicable package 5. Fix for update install on solaris2.8 and 2.9. 6. Fix for installing updates on solaris 2.8/2.9 Fix for customized ls command in environment. 7. Fix for unalias command failure Improved loading cxbf driver on aix 8. Fixed handling of updates when a loose update obsoletes an update in a service pack. 9. Update install support for Oracle iDataAgent and DB2 iDataAgent on linux s390. Update install fix for "Prevented By" updates. 10. If an update is installed in two different attempts once for each platform, Removeupdates fails while uninstalling it for the second package. Example, if a patch is installed on IDA first and then MA, RemoveUpdates removes the patch from MA but loses ability to remove from IDA. RemoveUpdates of an update will now succeed if no binaries were installed during the installation of update. 11. Update for Galaxy.tmpl was failing in addstartup scripts on sourcemage distribution as the runlevel directory is different. Added new runlevel directory 12. Fix for updating baseline of SP1a on GUI 13. Fix for installing Galaxy script along with a driver update. Script will patch cvsnap and linux_cxbf.rc to driver location. Added support for patching cvpkgchg. 14. Fix for removing numbered update, that has an update number partially matching with another package 15.. Lower number update may fail to install on new package if higher number update is already installed on existing package. Update installer may fail to identify stopped serives incase of long simpana install path. Update installer may add more entries in registry of PostGres as package id partially matches with update number Added code make registry enries for Laptop project 16.. Partial enhancements for RemoveUpdates to expire old updates. 17.. Added support in update installer to wait for sidb process. |
| 34352 | Base0 Client, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" 6. Support SnapProtect for VMAX Symmetrix Array. 7.. Unmount failing during Oracle RMAN Snap to tape backup. 8.. Mount of SAP/Oracle backup volumes failing. 9.. Snap is failing on Linux when file system mounted using device name /dev/dm-*. 10.. Snap mount operation failing. 11.. Snap operation failing on multipath devices on Linux platform. 12.. Snap mount failing on SuSE 11 |
| 34327 | Oracle iDataAgent, UNIX File System iDataAgent, Base0 Client, Media Explorer, | 1. DC was not always informed when files were being stubbed or unstubbed. 2. Restore of RAW device is failing with error 22 when VCA is enabled. 3. * Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected. * Fix for cvMountd crash in Aix MA 4. Archiver fails in Stubbing phase. 5. Active Directory browse fails to show items after running synthetic full. 6.. Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle. 7.. Support for switch database mode GUI option for Oracle snap restores 8.. SAP restore Job progress fix for multi-stream restores |
| 34317 | Base0 Client, Media Explorer, | 1. Service restart on client might falsely show missing updates for SP1a in CommCell Console. 2. 1.Install Software for Unix clients was not installing updates that were part of the DVD 2.New registry key on the client to indicate whether there are updates available for install. |
| 34275 | Base0 Client, Oracle iDataAgent, Media Explorer, | 1. Image File level restore fails on 32/64-MA if File System is not installed on the MA |
| 34108 | RootOfCPUFolder, | 1.. Added support for recording unix group/other user's access 2.. Added support for 64bit installs via reduced/native packages 3.. Custom package creator to not show all OEM brands. |
| 34100 | Base0 Client, Media Explorer, | 1. Stub Recalls may fail with error "Skipping retrieval as data is erased" for data which has not been erased. |
| 34097 | Oracle iDataAgent, MediaAgent, Base0 Client, Pre-PostInstall, Resource Pack, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. During AIX File System backup, clBackup parent process is not exiting and taking too much CPU. 2. Backup failures with network errors, when backing up files with large extended attributes. Special Note: Backing up extended attributes will be skipped for files with attributes size greater than buffer size. 3. FileSystem Backup Jobs pending with error code [82:156] |
| 34076 | RootOfCPUFolder, | 1. The service pack installation on content server ida fails while shutting down the apache tomcat server throwing error unable to find JRE_HOME. |
| 34060 | Base0 Client, | 1. "qlist lastjob " does not perform as supposed to. 2. qoperation merge, qoperation capture commands are no longer supported. 3. QScript execution may fail if the input parameters are not quoted by single quotes. |
| 34059 | Base0 Client, Media Explorer, | 1. Restores may fail from Variable Content Alignment enabled backups. 2. Dedupe not working for Synthetic Full backups 3. DB2 Backup fails with library load error on AIX. |
| 34007 | MediaAgent, | 1. Fixes issue where application data size displayed is much greater than actual backed up data size, when there are lots of sparse files or Archiver stubs in subclient |
| 33984 | Base0 Client, | 1. qlogin may crash after an upgrade from 8.0 to 9.0 |
| 33906 | MediaAgent, Base0 Client, Resource Pack, Media Explorer, Resource Pack Internal, Resource Pack Limited, | 1. Enhancement to allow marking backup files as read only for cloud devices that supports retention locking. 2. Enhancement to support Dell DX Object Storage Platform and HDS HCP. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 6. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 7. DASH Auxilliary Copy job may go to pending with job pending reason: Cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported. 8. Content Indexing job read failure from a chunk created by a suspended backup job on a Hardware single instance target. 9.. When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors. 10.. Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy. 11.. Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled. 12.. Prunable data on disk associated with DeDup storage policy may not be removed due to registry lookup failure. |
| 33878 | Base0 Client, Media Explorer, | 1. Special characters in the data cause SRM Data Collection jobs to fail. 2. Enhancement for VSA restore changes. Support for additional parameters during restore. 3. End User Search capability for Outlook Add-In Users 4. Read Ahead NAS backup options may not be available after upgrade to 9.0 5. Store additional metadata in index for virtual server agents 6. Capacity Usage table is currently not available in License Summary Report 7. Protected files report show incorrect file size. 8. Virtual Server Agent browse may fail when number of volumes in a virtual machine is greater than 20 9. Exchange Mailbox Archiver stub recalls may fail if user's smtp address has a case change in the middle of a cycle. 10. Browse fails after upgrading Media agent to 9.0 11. Commcell console does not allow selection of restore only exchange MB agents 12. Server side changes for enhanced VSA restores. |
| 33672 | MediaAgent, Base0 Client, Media Explorer, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 3. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33628 | Base0 Client, | 1. Script to change UNIX group and access permissions of galaxy folders/files after install. Special Note: This update is used in conjunction with update 33614. Without the additional update, Simpana will not honor the changes made by the script when new directories or files are created in the Simpana directory trees during the normal course of backup operations |
| 33615 | Base0 Client, Media Explorer, | 1. Backup of Image Level on AIX failed:Read from snap failed, check your cache settings. Snap possibly deleted due to cache overflow 2. Failure to detect all devices using volume explorer on redhat6.0. |
| 33585 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, | 1. CVD may crash on a busy firewalled setup 2.) Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels. 3.) sBindToInterface registry setting didn't work with hostnames (only with IPs) 4.) Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks 5.) Persistent tunnels were prebinding to the wrong IP on roaming laptops 6.) Log browse across firewalls may hang if SSL is in use 7.) CVD trying to do name to IP resolution every second 8. Log browse across firewalls may hang if SSL is in use 9.) Backups through firewall may become unresponsive 10. 8.0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS 11. Fix for CVD service not coming up sometimes. 12. Automatic scheduled jobs would not run after failing to get the job status. 13. Support for network throttling. Special Note: The minimum value for throttling is 128kbps. |
| 33569 | Base0 Client, | 1. CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates. 2. Fix for copying servicepack.ini of unix SP 3.. Copying updates/packages from GUI might fail on CommServe cache due to permission issues. 4.. Copy software fails to update installer files. 5.. Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases |
| 33511 | Base0 Client, | 1. Db2 instance configuration fails if instance owner is NIS user. Special Note: 1) Complete the agent install from media and say no to "Do You want relink DB2 with galaxy". This will complete DB2 Agent installation. 2) After successful installation, install this update and run Db2_install.sh to relink DB2 with simpana. |
| 33443 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33406 | Base0 Client, | 1. Install Update jobs fail to update the database when there are many additional updates |
| 33399 | Base0 Client, | 1. Add support for Snap Protect to the NetApp NAS iDA. 2. Command line support for creating VSA subclient 3. Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 4.) Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. 5.) Making command line apis thread safe |
| 33366 | RootOfCPUFolder, | 1. Installer to detect correct ServicePack level when ServiePack is using alphanumeric such as SP1a. |
| 33337 | RootOfCPUFolder, | 1. CommVault EULA updated. |
| 33314 | Oracle iDataAgent, MediaAgent, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, | 1. MySql restore fails with library load error 2. Add support for Snap Protect to the NetApp NAS iDA. 3. SAP/Oracle restore fails from tape copy of snap data. 4. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 5. DB2 Snap Backup fails while accessing online logs files. 6. CvMountd may crash if the network is slow 7. Utilize multiple streams during restore from Snap and Sanp Backup Copy. 8. Skip Oracle Snap Integrity check on source based on client registry key. Special Note: 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. 9. Random file-level restore failures from Image backups on AIX. |
| 33272 | Base0 Client, | 1. Added support for NetApp |
| 33268 | RootOfCPUFolder, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33247 | Base0 Client, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. 2. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33151 | Base0 Client, | 1. osc_config.xml file under the job results folder is not included in Send Log files zip bundle. 2. EvMgrC service may crash when View Logs or SendLogFiles operation attempted on a Unix client. |
| 33124 | RootOfCPUFolder, | 1. Fail the package installation code if silent install through push tries to install 32 bit package over 64 bit existing installation |
| 33123 | RootOfCPUFolder, | 1. After the install of LotusNotes Database IDA on AIX64, some updates might fail to install with crc mismatch errors. Issue was noticed with update aix_9.0.0B84_32361. |
| 33072 | RootOfCPUFolder, | 1.. 1.custom package creation for oracle/db2 ida's on s390 platform 2.. Update for DMLN was failing when there are multiple entries in notes.ini. Fixed in installer to remove previous entries if any, before adding new one. |
| 33070 | RootOfCPUFolder, | 1. New custom package creator for unix native package(RPM/Solaris/SD-UX/Darwin/APT) |
| 33028 | MediaAgent, Media Explorer, Base0 Client, | 1. Restore job may go to pending with JPR "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value". 2.. Added NFS Snap Protect support for Solaris Local Zone. 3.. Snap Protect operation deletes the source OS devices when Snap Engine layer couldn't find newly mapped LUN of snap. 4.. When mounting a snap do not guarantee space. 5. EMC Symmetrix Snap Backup job fails with "Failed to get array info" Special Note: Please have some fake username and password set in array credentials along with this diag update 6. Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1 Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/... 7. "Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. 8.) Oracle Snap Restore fails if incremental tape backup is run after the Snap. 9.) Snap revert operation failing on Solaris client when mount point is in root directory. 10. SAP datafile restores from Commcell GUI fails 11.) SAP archive log restores from Commcell GUI is not allowed when database in the open mode. 12. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 33005 | Pre-PostInstall, Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32997 | RootOfCPUFolder, | 1. upgrade from 8.0.0 fails when firewall present |
| 32980 | MediaAgent, | 1. Hardware snap creation will get failed if more than 2 filers configured in array management screen. Special Note: In New XCLI installation on VSA proxy scenario use below registry key to avoid reboot to set XCLI tools path. "'iDataAgent\XCLI_BINARY_LOCATION'" and set the value to install path of xcli example: "C:\Program Files (x86)\XIV\GUI10" |
| 32966 | Base0 Client, | 1. First stage of 1-Touch recovery does not detect Emulex NIC. solution :After booting with the 1-Touch restore using bootcd, open second terminal try a modprobe on be2net and ensure that be2net.ko driver gets loaded properly. example: modprobe be2net |
| 32951 | Base0 Client, Media Explorer, MediaAgent, | 1. Recalls on Exchange Mailbox Archiver stubs fail after upgrading CC and MA from 8.0 to 9.0 2. Index restore crashes during virtual server incremental backups 3. Fix for Virtual server iDA point in time restores from snap backups 4. createIndex sometimes fails with index moved between different MA machine architectures 5. image level iDA file browse fails on sparc solaris 64 bit media agent 6. Browse enhancements for exchange mailbox archiver agent to show all stubs within a given time range. 7. Archiver jobs fails after upgrading CS and MA to 9.0 and when data was erased through Browse prior to upgrade. 8. Initial backups might fail going to upgraded MA from 8.0 to 9.0 with grid store enabled and index cache server configuration. |
| 32949 | Base0 Client, Media Explorer, | 1. Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. |
| 32945 | Base0 Client, Media Explorer, MediaAgent, | 1. DDB reconstruction fails. 2. DDB simulation tool hangs when multiple simulations are attempted in parallel on the same machine. 3. NAS iDA backups to a tape drive on a NetApp file server are failing in the archive index phase with an error indicating "an internal software error occurred". Failure happens when using ONTAP 7.3.3 and IPv6 is not configured on the MediaAgent. 4. Dedup backups to dedup storage policy may stop working with the error: "Failed to start a transaction" 5. Dedup reconstruction will fail if MediaAgent package is not installed on the Commserve. 6. Auxcopy process may crash intermittently when dedup read ahead feature is active 7. DeDup Reconstruction job may fail in the [Add Records] phase. 8. Auxiliary Copy operation from DeDup enabled storage policy copy may fail if look ahead read is enabled. 9. Synthetic full backups done using DASH Read Optimized may not be restorable in certain cases. |
| 32638 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, UNIX File System iDataAgent, | 1. archiveIndex not starting on MAs Incremental backups fail in ArchiveIndex phase when there is nothing to backup. 2. Ifind goes to pending with loss of control for lotus Idas on linux-x64. 3. Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. 4. Laptop backup progress indicator isn't showing throughput or amount of transferred data. 5. Adds File Archiver support for new Ibrix FS. 6.) More information displayed on backup tray utility 7.) Name of the current file wasn't shown in backup tray utility on UNIX 8.) Total file count was not set on UNIX 9.) Final job status was not passed to backup tray utility 10.) Reason why new jobs cannot be scheduled was not passed to backup tray utility |
| 32534 | Base0 Client, | 1. CvNetchk binary is not packaged for 64bit platforms |
| 32526 | UNIX File System iDataAgent, Base0 Client, | 1. NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" 2.. Unix File system backup is slow. 3.. The UNIX File System backup will not backup data of a symbolic link when it is a sub-client, the "Expand symbolic links of subclient content" is checked, the symbolic link located in the root directory and it is linked with a relative path started with non-path delimiter symbols ('.' or '/'). 4. This update enables reporting of multipath devices and file system configured on multipath device mapper. 5. DC Support with Turbo FS Agent. |
| 32297 | MediaAgent, | 1. New media are not detected after adding the media to the magazine for some libraries. |
| 32245 | Base0 Client, | 1. Added support to host DC database on a central non monitored volume. |
| 32234 | Base0 Client, | 1. Net app images for some languages have incorrect images for applet launch page |
| 32117 | Oracle iDataAgent, | 1. Oracle, DB2, Informix and Sybase Backup/Recovery support for Dedupe with Variable content alignment(VCA). |
| 31870 | Oracle iDataAgent, | 1. Oracle offline backups with Lightsout script fails in csh environment. |
| 31868 | Media Explorer, Base0 Client, MediaAgent, | 1. After running SRM Analysis on NDMP client, some of the files with no extension are not reported properly by SRM Reports. 2. During a Nas backup, if the Job Manager service goes down for some reason, nasbackup continues backing up data. nasBackup should detect this condition and fail the backup phase with a relevant pending reason. 3. XIV snapshot mount operation on a VM (hosted on ESX server) fails. 4.. Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete. 5.. Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. 6. Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit." 7.. Unable to run successful VSA SnapProtect backups in some cases when the ESX server has huge number of disks. 8.. Added required support in addition to others for NAS Snap Protect. 9.. Add support for Snap Protect to the NetApp NAS iDA. |
| 31825 | Base0 Client, | 1. Linux 1-Touch GUI does not save the disk information after mapping is done |
| 31806 | Base0 Client, | 1. Laptop Backup install support for unix install |
| 31761 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, UNIX File System iDataAgent, Base0 Client, Media Explorer, | 1. Fixed a condition where Install and Uninstall Software could fail without reason. 2.. Unable to recall stub files after deleting the subclient. 3.. Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store. 4.. In certain cases, creation of storage policy pointing to a global deduplication policy fails. 5. Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console 6.. SRM FLA Filters are not working when User Name or Group Name contains spaces. 7.. Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. 8. NAS Backup is failing in round-robin scenario 9. Stubbing fails during Turbo FS incremental job if files were renamed or deleted. 10. Support for 1Touch ResponseFile configuration. 11. EvMgrC does not start after installing 9.0 SP1. |
| 31737 | MediaAgent, Media Explorer, UNIX File System iDataAgent, Base0 Client, | 1. Send Log Files operation from CommServ console when run on Unix clients does not gather galaxy log files. 2. Enhanced File System IDA to support archiving. 3.. Enhanced File System IDA to support archiving. 4.. EvMgrC failing to start on Mac OS X. |
| 31660 | Base0 Client, Media Explorer, | 1. Enhancement to allow end users to browse via Web console 2. QSDK crashes on running multiple On Demand Backups from command line. |
| 31649 | UNIX File System iDataAgent, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, | 1. Job management from mobile devices. 2. Taskbar icon to show status of currently running backups and information about previous backups. |
| 31570 | Base0 Client, | 1. cvlaunchd leaks memory |
| 31499 | Base0 Client, Resource Pack, Resource Pack Limited, Resource Pack Internal, Media Explorer, MediaAgent, | 1. Backup might fail when too many jobs are run. 2.. GXHSMService crashes during service shutdown or service restart. 3.. Support unix intermediary media agents for pod cell imports. 4.. Fixes folder deletion warning during deconfiguration of Dell DX6000 and other Object based cloud library mount path. 5. Automatic schedule support for laptop and desktop backup. |
| 31447 | Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, Base0 Client, Media Explorer, | 1. Fixes occasional CvMountd crash on Unix MediaAgents. 2.. Enhancement to allow exchange and sharepoint mining from VSA snaps 3.. Support for laptop and desktop backups Fix for cluster upgrades for missing DB package rows. Support for Unix Turbo File System |
| 31444 | MediaAgent, Base0 Client, Oracle iDataAgent, Media Explorer, | 1. Backups might fail for certain iDAs when staging index cache location is enabled. 2. PostgreSQL iDA Table level restores are failing 3. UpdateIndex might fail with error "Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover" when several backup jobs start running simultaneously. 4. Backup job might fail with error "Loss of control process archiveIndex.exe" when several backup jobs start running simultaneously. 5. Fix for browse failure when a job fails over between multiple datapaths and Index Cache Server is configured. 6. To remove use exact index option and for the system to automatically choose what index to use. 7. TurboFS backups and restores sometimes fail. |
| 31425 | UNIX File System iDataAgent, Base0 Client, | 1. GXHSMService dumps core during service shutdown. 2. Enhanced File System IDA to support archiving. |
| 31327 | Media Explorer, Base0 Client, | 1. Job Pending reason is not correct when client side dedup backup is
attempted to an upgraded 8.0 DDB.
2. Restores from re-encrypted copy may fail if the Auxilliary copy operation
was performed using a Unix MediaAgent with 'Optimize for concurrent LAN
Backups' option turned off.
3. Backup might fail when too many jobs are run.
4.. Enables the "Variable Content Alignment" feature
5.. SQL transaction log backup may fail with error "The control process for the
previous phase is still running. PID [ |
| 31283 | Base0 Client, | 1. Adding VCS specific scripts required for installation. |
| 31209 | Oracle iDataAgent, UNIX File System iDataAgent, Base0 Client, Media Explorer, | 1. GXHSMService crashes during recalls on a host with only VM (no PM) installed. 2. File permissions on ORASBT.log is getting reset on restricted environments. Special Note: set registry key sSKIPRESETORASBTLOGPERMS to Yes under OracleAgent/.properties. 3) Integrated install and File System IDA with Unix VERITAS Cluster. 4) Enhanced File System IDA to support archiving. 5) SILO DDB backup fails to backup DDB files. 6. Discover job merge failure when XML files are collected with decoupled database capture. 7. Hide TSM admin passwords in logging. 8. JPR for incorrect login/password. 9. Unix Netapp NFS Snap protect support SILO DDB restore fails to restore DDB files. Special Note: 1. We do not support NFS exports exported using alias names from the NetApp file server. For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported. The export name on the filer should be the same as the storage path on the filer. eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree 2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume are supported. 3. Use only the short name for the filer while mounting NFS exports from the filer. Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. |
| 31175 | Base0 Client, Media Explorer, | 1. Improves HPUX dedup backup performance. |
| 31146 | Base0 Client, Pre-PostInstall, Resource Pack, Resource Pack Limited, Resource Pack Internal, MediaAgent, Media Explorer, | 1. Silo Archival job may fail with missing chunk error. 2.) Data size in Silo shown in Storage Policy Copy Properties and Storage Policy Report does not include the size of volumes processed by Silo Disk Cleanup. 3.) Size of Dedupe DB is shown incorrectly in the Storage Policy report. 4.) New option in Commcell configuration report to show index cache content information Special Note: This update needs to be installed with the GUI update form 07496 5. Notify GUI Server Developers: Item [^10] missing from cvEncode. should not be visible in GUI. 6. Restore/Auxilliary Copy jobs may not progress when Silo Retrieval job gets interrupted. 7. SILO Archived DDB is not removed from disk. 8. Jobs may fail to query CommServe Version string from Media Agent when CommServe is under heavy load. 9. Enhancement to support Dell DX Object Storage Platform and HDS HCP. Special Note: Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data. Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file. |
| 31140 | Base0 Client, | 1. Ability to run snap backup from qcommand followed by movement to tape job 2.. qcommand.log may log passwords when using qoperation execscript command with password inputs 3.. QSDK.log log login credentials at default logging level. |
| 31123 | Base0 Client, | 1. Installation of Filesystem Agent Fails on Freebsd 7/8 amd64 |
| 30962 | MediaAgent, Base0 Client, Media Explorer, | 1. Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails. 2. Mount of the HDS snap is failing on partitioned device. 3. Snap reverts fixes for HDS Snap Engine. 4. Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) |
| 30926 | Base0 Client, Media Explorer, | 1. QSDK crashes on running multiple On Demand Backups from command line. |
| 30826 | Base0 Client, Media Explorer, Oracle iDataAgent, | 1. Backup with Flash Recovery Area fails intermittently. 2. Mark Restore job status to pending if encountered any errors. 3. Oracle 11GR2 Table Restore fails with Tablespace not self contained error. 4. Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID. Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. |
| 30641 | MediaAgent, | 1. ScanScsiTool was missing from 32-bit Media Agent Package on Linux. |
| 30527 | Base0 Client, Resource Pack, Media Explorer, | 1. Two library were missing from CVGxBase0 package. |
Products in Germany are not distributed using the "QNet" brand.
In Deutschland werden keine Produkte der Marke QNet mehr vertrieben.