System Requirements - SRM UNIX File System Agent

System Requirements Supported Features  

The following requirements are for the SRM UNIX File System Agent for UNIX file system.

Operating System

Processor

AIX

AIX 6.1 64-bit

Power PC (Includes IBM System p)

AIX 5.3 32-bit and 64-bit with technology level 7 (or higher) and runtime library xlC.rte 8.0.0.0 or higher

Note that all AIX platforms support Logical Partitions (LPAR).

Power PC (Includes IBM System p)

HP-UX

HP-UX 11i v3 (11.31)

Itanium

HP-UX 11i v3 (11.31)

PA-RISC

HP-UX 11i v2 (11.23)

PA-RISC

HP-UX 11i v2 (11.23)

Itanium

HP-UX 11i v1 (11.11) with a minimum of OS patch level of December 2008 patch bundle or higher (contact Hewlett Packard to obtain the patch)

PA-RISC

Linux

Debian

Debian 5.x with glibc 2.7.x

Intel Pentium, x64 or compatible processors

Mandriva

Mandriva Linux 2009 with glibc 2.9.x

Intel Pentium, x64 or compatible processors

Red Hat Enterprise Linux/CentOS

Red Hat Enterprise Linux/CentOS 4.x with a minimum of glibc 2.3.4

Intel Pentium, Itanium, x64 or compatible processors

SuSE Linux (SLES)

SuSE Linux 10.x with glibc 2.4.x

Intel Pentium, Itanium, x64 or compatible processors

Ubuntu

Ubuntu 9.04

Intel Pentium, x64 or compatible processors

Ubuntu 8.10

Intel Pentium, x64 or compatible processors

Solaris

Solaris 9

Sparc5 or higher recommended

Solaris 10.x with a minimum of SunOS (Sparc) Patch 119963-14

Sparc5 or higher recommended

Cluster - Support

The software can be installed on a Cluster if clustering is supported by the above-mentioned operating systems.

For information on supported cluster types, see Clustering - Support.

Hard Drive

220 MB minimum of hard disk space for software

100 MB of additional hard disk space for log file growth

20 MB of temp space required for install or upgrade (where the temp folder resides)

Memory

16 MB RAM minimum required beyond the requirements of the operating system and running applications

Swap space = 2*RAM size

Solaris Zones/Containers Support

Data Protection of data residing on global and non-global zones is supported.

For a comprehensive list of supported components, see Unix Virtualization.

AIX LPAR/WPAR Support

Data protection on Logical Partitioning (LPAR) and Workload Partitioning (WPAR) is supported.

Peripherals

DVD-ROM drive

Network Interface Card

Miscellaneous

Network

TCP/IP Services configured on the computer.

The operating system must have been installed with at least the user level software option selected.

The SRM UNIX File System Agent for UNIX File System support the file system types listed in the following table:

Supported File System(s)

SRM UNIX File System Agent name

Extent 2 File System (ext2)Linux
Extent 3 File System (ext3)Linux
Extent 3 File System (ext4)Linux
Hierarchical File System (HFS)HP-UX
Journal File System (JFS)AIX
Journal File System 2 (JFS2)AIX
Reiser File System (reiserfs)Linux
Unix File System (UFS)Solaris
VERITAS File System (VxFS)HP-UX, Solaris, AIX
Virtual File Allocation Table (VFAT)Linux
'X' File System (XFS)Linux
Zettabyte File System (ZFS)Solaris

SELinux

If you have SELinux enabled on the client computer, create the SELinux policy module as a root user before performing a backup. The SELinux Development package must be installed on the client.

To create an SELinux policy module, perform the following steps as user "root":

  1. Create the following files in the /usr/share/selinux/devel directory:
File Name Content of the File
<directory>/<file_name>.te

where:

<directory> is /usr/share/selinux/devel

<file_name> is the name of the Unix file, created to save the policy module statement. It is a good idea to use the same name for policy module and the file.

For example: When you are creating a policy module for backup_IDA application, you can use the following file name: backup_IDA.te

 

 The content of the file should be as follows:

policy_module(<name>,<version>)

##############################

where:

<name> is the name of the policy module. You can give any unique name to the policy module, such as a process or application name.

<version> is the version of the policy module. It can be any number, such as 1.0.0.

For Example: While creating a policy module for the backup_IDA application, you can use the following content.

policy_module(backup_IDA,1.0.0)
<directory>/<file_name>.fc

where:

<directory> is /usr/share/selinux/devel

<file_name> is the name of the Unix file, created to save the policy module statement. It is a good idea to use the same name for policy module and the file.

For example: When you are creating a policy module for backup_IDA application, you can use the following file name: backup_IDA.fc

 

 The content of the file should be as follows:

Note that the following list of files is not exhaustive. If the process fails to launch, check /var/log/messages. Also, if required, add it to the following list of files.

/opt/<software installation directory>/Base/libCTreeWrapper.so -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libCVMAGuiImplgso -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libdb2locale.so.1 -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libdb2osse.so.1 -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libDb2Sbt.so -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libdb2trcapi.so.1 -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libDrDatabase.so -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libIndexing.so -- gen_context(system_u:object_r:texrel_shlib_t,s0)

/opt/<software installation directory>/Base/libSnooper.so -- gen_context(system_u:object_r:texrel_shlib_t,s0)

 
  1. Create the policy file from command line. Use the following command. Ensure that you give the following commands in the /usr/share/selinux/devel directory.

[root]# make backup_IDA.pp

Compiling targeted backup_IDA module

/usr/bin/checkmodule: loading policy configuration from tmp/backup_IDA.tmp

/usr/bin/checkmodule: policy configuration loaded

/usr/bin/checkmodule: writing binary representation (version 6) to tmp/backup_IDA.mod

Creating targeted backup_IDA.pp policy package

rm tmp/backup_IDA.mod tmp/backup_IDA.mod.fc

[root]# semodule -i backup_IDA.pp

[root]#

  1. Execute the policy module. Use the following command:

[root]# restorecon -R /opt/<software installation directory>

SELinux is now configured to work with this application.

DISCLAIMER

Minor revisions and/or service packs that are released by application and operating system vendors are supported by our software but may not be individually listed in our System Requirements. We will provide information on any known caveat for the revisions and/or service packs. In some cases, these revisions and/or service packs affect the working of our software. Changes to the behavior of our software resulting from an application or operating system revision/service pack may be beyond our control. The older releases of our software may not support the platforms supported in the current release. However, we will make every effort to correct the behavior in the current or future releases when necessary. Please contact your Software Provider for any problem with a specific application or operating system.

Additional considerations regarding minimum requirements and End of Life policies from application and operating system vendors are also applicable