Go to main contents page

Power Cords

As the equipments are moved very often, the standards admit the flexible power cords type.

But the DPS 7000 (family) and DPS 9000 (RPM 2, Jupiter, TAxxx) are delivred with a shielded power cord type. See Figure A.

So in the connection module, the braid (shield) must be connected with a jumper on the border of PE wire (yelow-green). See Figure B.

Figure A: Braid-protected cable

Figure B: Screening continuity

Important: According to the safety standards in force, it is essential to isolate the jumper and the protective braid in the connection module. The colour of this isolating material must be grey or transparent.

Go to main contents page