============================================================================= Intel(R) Server Compute Blade SBXD132 Baseboard Management Controller (BMC) Update Release Notes ============================================================================= INTEL Enterprise Platform & Services Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: October 22, 2007 TO: Intel SB-HE customers SUBJECT: SBXD132 BMC Update ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2007 Intel Corporation. ============================================================================= ABOUT THIS RELEASE ============================================================================= Release :BMC_36A Version :1.10 ============================================================================= Overview ============================================================================= This diskette will update the Baseboard Management Controller (BMC) firmware and sensor data records (SDRs) only. It will not affect any device drivers. 1. Limitations - If there is an error in loading the BMC firmware or SDRs retry loading the software by repeating the instructions in IMPORTANT INSTALLATION and SETUP NOTES/Procedures. 2. Enhancements - IPMI 3. Level of Recommendations and Prerequisites for the update: - BIOS version 1.00, or later, must be installed prior to installing this ISMP firmware update. - A full tape backup should be completed and verified prior to running this, or any other system upgrade. - RAID configuration should be saved to a diskette: see the "Hardware Maintenance Manual" for more details. 4. Dependencies - N/A ============================================================================= Change History ============================================================================= Baseboard Management Controller Version 1.10 - Added support for Power Executive including power measurement and capping - Fixed Cold Reset Error after flash - Fixed intermittent false 0.9V errors Baseboard Management Controller Version 1.07 - Fix Serial Over LAN (SOL) not going ready Baseboard Management Controller Version 1.06 - Fixed SOL corruption when stopping and starting the SOL session - Eliminate Erroneous hard drive errors on BSE3 Baseboard Management Controller Version 1.04 - Added support for quad-core CPUs - Fixed an intermittent flash "hang" problem - Fixed Fuel Gauge to report memory DIMM numbers (Watts) from tables on AC cycle or out of box insertion rather than from EEPROM-stored values Baseboard Management Controller Version 1.03 - Various Fixes for Power Executive Baseboard Management Controller Version 1.01 - Various Fixes for Power Executive Baseboard Management Controller Version 1.00 - Original Release ============================================================================= IMPORTANT INSTALLATION and SETUP NOTES/Procedures ============================================================================= To use this diskette, perform the following steps: a) Make sure BIOS version 1.00, or later, is installed. b) Make sure your system is powered down. c) Insert the diskette in the diskette drive. d) Power on your system to boot from diskette drive. If your system does not boot from the diskette, use POST/BIOS setup utility to configure the diskette drive as a boot device. e) Once your system boots, a ramdrive will be created, the appropriate files will be copied to this ramdrive and the BMC update firmware update will execute automatically. f) When the update completes, remove the diskette from the drive and restart the system. SBCE CMM Web GUI Update ********** REQUIRED: MAKE SURE THE BLADE IS POWERED OFF AND ALL BLADES ********** ********** ARE DISCOVERED BEFORE FLASHING ********** 1) To install the Baseboard Management Controller (BMC) firmware from the Chassis Management Module (CMM) web interface, perform the following steps: a) Open a Web browser. In the address or URL field, type the IP address or host name of the CMM to which you want to connect. The Enter Network Password window opens. Note: The CMM defaults to DHCP. If a DHCP host is unavailable, the CMM assigns a static IP address of 192.168.70.125. b) Type your user name and password in the Enter Network Password window. c) Select a timeout value, in minutes, in the field provided. If your browser is inactive for that number of minutes, the CMM logs you off the Web interface. d) Click Continue to start the session. The browser opens the System Health page, which gives you a quick view of the system status. e) In the navigation frame, click Firmware Update under Blade Tasks, select the Target blade slot number, then click Browse. f) Switch to the drive and directory containing the unpackaged files. Navigate to the PKT file you want to update, named as: BCBTxxy.PKT (Where xx = build ID, and y = revision.) g) Click Open. The file (including the full path) appears in the box beside Browse. h) To begin the update process, click Update. A progress indicator opens as the file is transferred to temporary storage. A confirmation page opens when the file transfer is completed and the Integrated System Management Processor has been restarted. ***Note: To cancel this process at any point, click Cancel*** 2) In Case of a failed SBCE CMM Web GUI Update flash a) Only one blade can be in kernel mode in a chassis at one time. b) The CMM has known issues if a flash fails. The easiest way to recover is to: 1) Pull the failed blade from the chassis 2) Reset the CMM 3) Reinsert the failed blade 4) Retry the flash on the failed blade after the blades have all been discovered. ============================================================================= Unattended Mode ============================================================================= This update utility does not support unattended installations. ============================================================================= Support Web Site ============================================================================= http://www.intel.com ============================================================================= REFERENCE MATERIAL ============================================================================= Intel(R) Server Management Module SBCECMM: User's Guide Intel(R) Server Compute Blade SBXD132: Installation and User's Guide This guide may be found on the support resource CDs, the Intel Business Link support site, or may be obtained from your Intel support representative. [END OF RELEASE NOTES]