SuperTrak-EX-Series For Linux RedHat AS/ES/WS 4.0 Update 4 
                   Driver Version 2.9.0.16 

1. [INTRODUCTION]

1.34 File List

rhel40u4.img:     The floppy disk image file used to install Linux 
              Redhat AS/ES/WS 4.0 Update 4 with SuperTrak-EX-Series Driver, these drivers 
              support Linux kernel 2.6.9-42.EL, kernel 2.6.9-42.ELsmp and 
              kernel 2.6.9-42.ELhugemem.

readme.txt :  This file

1.2 How to make floppy

1.2.1 On DOS-based PC:
	Running "rawrite.exe" and according to prompt to extract image file
	to floppy.

1.2.2 On UNIX/LINUX-based PC:
	running command "dd if=imagefilename of=floppydevicename bs=10k" to
	copy image file to floppy.
	Note: 
	    imagefilename --- the disk image file name that you want to copy.
	    floppydevicename --- the floppy device name, on linux OS that name
	should be "/dev/fd0".


2. [How to Install]

!!!NOTE: If you want to use SuperTrak-EX-Series card with SATA hard disk in Enclosure SS1100/SS4100, you should connect these enclosure to SuperTrak-EX-Series card's 
   slot one by one in sequence. If not, these enclosure will be not controlled
   correctly.
	
2.1 RedHat installation.

2.1.34 New OS Installation:

   Make a the Driver disk from "rhel40u4.img" by 
the way as section 1.2 described, and insert it to your floppy drive, and 
do the following steps:

   1.) Start the Redhat Install by booting with the installation diskette
       or bootable CD ROM.
   2.) On "Welcome to Red Hat Linux" installation screen, a prompted label 
       "boot:" will appear at the bottom of the screen. If you are installing 
       Red Hat Linux AS/ES/WS 4.0 Update 4, type in "linux dd" (without quotation mark) and then press enter. 
   3.) You will be asked "Do you have a driver disk?". Select "Yes".
   4.) When prompted "Insert your driver disk and press OK to continue", 
       insert the driver diskette in the floppy drive and then select "OK".
   5.) After that, Continue with the installation as normal. 

2.1.2 Install SuperTrak-EX-Series Driver on RedHat exist OS

   Get a floppy for installing all SuperTrak-EX-Series drivers, and insert it 
   to floppy driver, and do the following steps:
   1.) login as root
   2.) run "mount -r /dev/fd0 /mnt/floppy"
   3.) run "cd /mnt/floppy; sh ./install"
   4.) run "cd; umount /mnt/floppy"