ExpressScope
ExpressScope : FAQ729005
- Is JAVA 2 Runtime Environment, Standard Edition 5.0 or later installed in your remote
management PC ?
=> You need to install Java2 Runtime Environment, Standard Edition 1.4.2 or later in
your management PC. You can download the latest JRE (Java Runtime Environment) at:
http://java.sun.com/j2se/
- Is the network cable properly connected to the Management LAN port ?
=> Check whether the LAN cable is connected to the Management port.
- Is a firewall or a gateway configured to limit the communication with the Internet ?
=> A firewall or a gateway may be set to limit the communication with the
Internet. Connect the LAN cross-over cable directly to the management PC and see if
the issue is resolved. Make sure again whether a firewall or a gateway is limiting the
communication with the Internet.
- Is the DHCP function enabled ?
=> If you enable the DHCP function in the environment where DHCP is not supported,
you will not be able to communicate with the BMC. To resume the communication, start
EXPRESSBUILDER, select [Tool]-[System Management]-[Set System management
Parameters]-[Configuration], and configure network settings, such as IP addresses.
=> You may clear all the BMC settings and use the default IP addresses to communicate
with the BMC. Go to the next page for the tip: ?I forgot my user name and password for
remote management and Command Line Interface.?
Documentation Utilisateur