Copyright © Bull SAS 2008

Please note that KVM-Over-LAN is only supported on AOC-SIMSO+

To see Self Help:
01v01-HowTo_Replace_the_AOC_SIMSO_IP_Address.pdf
02v01-HowTo_Create_a_Windows_Computer_Cluster.pdf

-----------------------------------------------------------------------------------
April 7, 2008 Technical State SUPP_TS03

Last Firmware version for AOC-SIMSO+  (any hardware version): ugsim150.bin
	
NIC Support improvement
-----------------------------------------------------------------------------------
November 23, 2007 Technical State SUPP_TS03

Last Firmware version for AOC-SIMSO+  (any hardware version): ugsim148.bin
	"Power Diag" command is OK

If all sensors are disable after a firmware upgrade, 

	1)-Note AOC-SIMSO MAC address and IP address
	2)-Run defaultp.exe 
	3)-Do Power down
	4)-Do Power up
	5)-Re-fill AOC-SIMSO MAC and IP addresses

-----------------------------------------------------------------------------------
October 8, 2007
Last Firmware version for AOC-SIMSO+ hardware version V2 or lower: ugsim131.bin
Last Firmware version for AOC-SIMSO+ hardware version V3 : ugsim145.bin
-----------------------------------------------------------------------------------