Select Components for Installation
Install Requirements |
The Domino Mailbox Archiver Agent is installed on the computer
from which the Domino Server resides. (This computer is referred to as the
Client computer in this install procedure.) Verify that the computer in which you wish to install the software satisfies the minimum requirements specified in the following:
General
Before You Begin
|
1. |
Place the software
installation disc for the Unix platform into the disc drive. You can also install the product using a disc drive mounted on another computer on the network.
|
|
2. |
The product banner and other information is displayed.
Press Enter to continue. |
|
3. | Read the license agreement. Type y and press Enter to continue. | |
4. |
Enter the number corresponding to the setup task you want to perform. NOTES
|
Please select a setup task you want to perform
from the list below: Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software. 1) Install data protection agents on this computer 2) Advance options 3) Exit this menu Your choice: [1] |
5. |
If your computer is 32-bit, press Enter. If your computer is 64-bit, see Install Unix Agents on 64-bit Platform for step-by-step procedure. |
This machine supports both 32 bit and 64 bit
binaries. By default, we will install 32 bit binary set that has full support for
all the modules included in this package. Please note that 64 bit binary set
currently only support limited modules. 1) All platforms (32 bit) 2) FS and MA only (64 bit) Your choice: [1] |
6. | This prompt is displayed only when you are installing on
AIX, HP-UX, Linux, or Solaris computers.
Press Enter to continue NOTES
|
Certain Calypso packages can be associated
with a virtual IP, or in other words, installed on a "virtual machine" belonging
to some cluster. At any given time the virtual machine's services and IP address
are active on only one of the cluster's servers. The virtual machine can
"fail-over" from one server to another, which includes stopping services and
deactivating IP address on the first server and activating the IP
address/services on the other server.
You now have a choice of performing a regular Calypso install on the physical host or installing Calypso on a virtual machine for operation within a cluster. Most users should select "Install on a physical machine" here. 1) Install on a physical machine 2) Install on a virtual machine 3) Exit Your choice: [1] |
7. |
If you have only one network interface, press Enter to accept the default
network interface name and continue.
If you have multiple network interfaces, enter the number corresponding to the network interface that you wish to use as default, and then press Enter to continue. NOTES
|
We found one network interface available on
your machine. We will associate it with the physical machine being installed,
and it will also be used by the CommServe to connect to the physical machine.
Note that you will be able to additionally customize Datapipe Interface Pairs
used for the backup data traffic later in the Calypso Java GUI. Please check the interface name below, and make connections if necessary: Physical Machine Host Name: [angel.company.com] |
8. |
Specify the client name for the computer.
Press Enter to accept the default name and continue, or |
Please specify the client name for this machine. It does not have to be the network host name: you can enter any word here without spaces. The only requirement is that it must be unique on the CommServe. Physical Machine Client name: [angel] |
Select Components for Installation |
9. | Enter the number corresponding to the CVGxLndmIDA
module.
A confirmation screen will mark your choice with an "X". Type "d" for Done, and press Enter to continue. NOTES
|
Install Calypso on
physical machine client.company.com Select the Calypso module that you would like to install
[ ]
1) Media Agent [1301] [CVGxMA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2 |
Base Software Installation |
||
10. |
If you wish to install the agent software for restore only, enter Yes and press
Enter to continue. See
Installing Restore Only Agents for
more information. Otherwise, accept no, press Enter to continue. |
Do you want to use the agents for restore only without consuming licenses? [no] |
11. |
Type the appropriate number to install the latest software scripts
and press Enter to continue. NOTES
|
Installation Scripts Pack provides extra
functions and latest support and fix performed during setup time. Please specify
how you want to get this pack. If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. 1) Download from the software provider website. 2) Use the one in the installation media 3) Use the copy I already have by entering its unix path Your choice: [1] 2 |
12. |
Enter Yes to download and install the latest service packs and post packs from the software provider. NOTES
Press Enter to continue. |
Keep Your Install Up to Date - Latest Service
Pack
Latest Service Pack provides extra functions and latest support and fix for the packages you are going to install. You can download the latest service pack from software provider website. If you decide to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. Do you want to download the latest service pack now? [no] Press <ENTER> to continue ... |
13. |
Specify the location where you want to install the software.
NOTES
Press Enter to accept the default path and continue, or Press Enter again to confirm the path. |
Please specify where you want us to install
Calypso binaries.
It must be a local directory and there should be at least 98MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso". Installation Directory: [/opt] .. Calypso will be installed in /opt/calypso.
|
14. |
Specify the location for the log files.
NOTES
Press Enter to accept the default path and continue, or Press Enter again to confirm the path. |
Please specify where you want to keep
Calypso log files.
It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files". Log Directory: [/var/log] .. Calypso log files will be created in /var/log/calypso/Log_Files. |
15. |
Indicate whether you would like to launch processes with inherent database
access rights.
Press Enter to
assign a new group, or |
Most of Calypso processes run with root
privileges, but some are launched by databases and inherit database access
rights. To make sure that registry and log files can be written to by both kinds
of processes we can either make such files world-writeable or we can grant write
access only to processes belonging to a particular group, e.g. a "calypso" or a "dba"
group.
We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Calypso processes, all temporary and configuration files will be created with -rw-rw-rw permissions. If you're planning to backup Oracle DB you should use "dba" group. Would you like to assign a specific group to Calypso? [yes] |
16. |
If you indicated Yes in the previous step, you will be prompted for
the group name that must be used to launch processes.
Enter the group name and then press Enter to continue. Press Enter again to continue. |
Please enter the name of the group which
will be assigned to all Calypso files and on behalf of which all Calypso processes
will run.
In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here. Group name: dba REMINDER If you are planning to install Calypso
Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make sure to include
Informix, DB2, etc. users into group "dba". |
17. |
Type a network TCP port number for the Communications Service (CVD) and press Enter.
Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter. NOTES
|
Every instance of Calypso should use a unique set of network ports to avoid
interfering with other instances running on the same machine. The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine. Please enter the port numbers. Port Number for CVD : [8600] Port Number for EvMgrC: [8602] |
18. |
If this computer and the CommServe is separated by a firewall, type Yes and then press
Enter to continue.
For firewall options and configuration instructions, see Firewall Configuration and continue with the installation. If you do not wish to configure the firewall services, type No and then press Enter to continue. |
Is there a firewall between this client and the CommServe? [no] |
19. |
Type the name of the CommServe computer and press Enter to continue.
NOTES
|
Please specify hostname of the
CommServe below. Make sure the hostname is fully qualified, resolvable by the
name services configured on this machine. CommServe Host Name: |
20. |
Enter the username and password information for an external
domain user account or a CommCell user account. This authorizes the installation
of an agent on the CommCell.
NOTES
Click Enter to continue. |
Enter your CommCell user name and password: User Name : Password : Press <ENTER> to continue ... |
Enable Global Filters |
||
21. |
Type the appropriate number for configuring Global Filters for the default
subclient and press Enter to continue.
NOTES
|
Commcell Level Global Filters are set
through Calypso GUI's Control Panel in order to filter out
certain directories or files from backup Commcell-widely. If you turn on the
Global filters, they will be effective to the default subclient. There are three
options you can choose to set the filters.
1) Use Cell level policy Please select how to set the Global Filters for the default subclient? [1] |
Client Group Selection |
||
22. |
Type the number of a Client Group and press Enter.
A confirmation screen will mark your choice with an "X". Type d for done with the selection, and press Enter to continue. NOTES
|
Client Group(s) is currently configured on CommServe
cs.company.com.
Please choose the group(s) that you want to add this client
client.company.com to. The selected group(s) will be marked (X) and can be
deselected if you enter the same number again. After you are finished with the
selection, select "Done with the Selection". [ ] 1) Unix [ ] 2) DR [ ] 3) DKS [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2 |
23. |
Press Enter to continue.
NOTES
|
+---------------------+
IMPORTANT: In addition to installing Calypso on this computer, you will also need to create a Job Schedule for each iDataAgent that has been installed on this client computer. Job Schedules are required to allow the Calypso iDataAgents to perform automated backup and restore operations. Job Schedule creation can be accomplished through the Calypso CommCell Console administration interface. +---------------------+ |
Storage Policy Selection |
||
24. |
Enter the number corresponding to the storage policy through which you want to back up
the File System iDataAgent and then press Enter to continue.
NOTES
|
Please select one storage policy for this IDA from the list
below:
1) SP_StandAloneLibrary2_2 Storage Policy: [3] |
Configure Partitions |
||
25. | The home directory reflects the directory in which the Lotus Notes software is installed. Type the name of home directory for the partition and then press Enter to continue. | Please enter Domino Home
Directory. Notes Home Directory: |
26. | The partition name reflects the name of the computer on
which the software is installed. Type the name of the partition and then
press Enter to continue. NOTES
|
Please enter Domino Partition
Name. Domino Partition Name: |
27. | The data directory reflects the directory in which all databases reside. Type the name of the data directory for the partition and then press Enter to continue. | Please enter Domino Data
Directory. Domino Data Directory: |
28. | Review the information listed on the verification screen
and then press Enter to continue. To change partition information, type no and press Enter. The system returns you to Configure Partitions to enter the partition name again. |
You have entered all
the required information for this partition. Please review it now, and answer "yes", if it is correct:
Domino Partition Name........ your entry
here |
29. | The system asks if you would like to configure another
partition. If you don't want to configure another partition, press Enter; otherwise type yes and press Enter to return to Configure Partitions and configure another partition. |
Configured 1 partition(s)
of Notes so far. Would you like to configure another partition? [no] |
30. | The install program now starts copying the software to the computer. The progress of the operation is displayed. |
..... ..... ..... ..... Successfully copied xx files .......... Successfully installed <package_name>. Press ENTER to continue ... |
Setup Complete |
||
31. |
If this module was the last possible module to install, you are automatically
exited from the program. Otherwise, type the number for the Exit option and then press Enter. Your screen may appear different from the example shown. The installation is now complete. |
1) Proxy FileSystem iDataAgent <= CVGxProxyIDA 2) Oracle iDataAgent <= CVGxOrIDA 3) DB2 iDataAgent <= CVGxDB2 4) Exit this menu Module number: [1] |
Post-Install ConsiderationsGeneral
|