Firewall configuration cannot be pushed to clients during push-installs. With this fix, firewall information can be added to xml file generated by save as script before performing push install on client. Additional Instructions Run InstallSoftware from GUI.
Fill in all the required details for job and save it as script.
Add Firewall configuration in xml file InstallFlags tag as follows:
Run the saved script.
Allow firewall configuration to be pushed to client from command line. But do not show firewall configuration in GUI. Additional Instructions Run InstallSoftware from GUI.
Fill in all the required details for job and save it as script.
Add Firewall configuration in xml file InstallFlags tag as follows:
Run the saved script.
Installation of windows clients from Gui might fail .
Fix for de-configured clients to automatically get into decoupled mode to avoid denial of service attack to its CS.
The CVD service may crash when running lot of jobs on that machine.
Additional Instructions Job Registration messages get timed out because of only one thread serving them.
CVD service may not start on XP laptop after a reboot.
CVD of client/Media Agent may crash when it is processing too many jobs at the same time.
CVD service may report as not running during data transfer.
Backup Copy of Virtual Server Snap fails in mounting of snap
Snap Protect jobs using Clariion may hang the system while deleting underlying paths if corresponding powerpath device could not be deleted.
Snap Protect jobs using Clariion on Unix machines may crash when SYMAPI_HOME_DIR is not set.
Snap Protect jobs using Clariion with powerpath may delete all the paths which are not being used, as part of clean up.
VSA snap backup may fail when unable to unmount snap device from local host.
SnapTest tool fails to recognize clariion disk when array credentials are not entered in CS. Additional Instructions 1. Create MULTIPATH_DEV_REMOVE_ATTEMPT_CNT under EventManager and set to a value indicating number of attempts the powerpath device cleanup should be attempted. If not set, the default retry attempt is 10.
2. Create CLARIION_SLEEP_TIME_SECONDS under EventManager and set to a value in seconds indicating after how long the retry should be attempted. If not set, the default retry period is 10 seconds.
Clariion snap backup fails to detect host device path if device contains more than 3 snaps.
VSA Snap backup copy job may not cleanup snapshot devices from the Clariion array.
Clariion snap backups may fail in CX4-960 prepare phase with error "Failed to get clariion device properties"
Clariion snap and clone support for VNX array.
Clariion clone backup job may get stuck while synchronzing the target.
Clariion clone backup job may crash while synchronizing the target.
Setting of firewall and network throttle at client/client group level checks for administrative capability at CS level than agent management at entity level
Require the ability to have "System State" only backup as content for the default subClient of windows SubClient Policy definitions. Additional Instructions None.
Running Qmodify clientgroup qcommand results in "Connection to the Commserver terminated, Relogin required" error
Change version string from '9.0.0(BUILD84) to '9.0 R2'
qlogout audit trail displays 'User log out failed', though logout has been sucessful, if the idle connection to the CS has been deleted
qlogout is audited as admin user in user section irrespective of the user logged out
This fix enables the user to add a media agent to a shared index cache by suspending the running jobs.
After upgrade first schedule run time may be off by one day
After upgrade the schedule start day may be off by one day
Fixes/Enhancements to the Import from Podcell feature. Among them: Importing of libraries; the ability on the GRC to keep track of job changes happening on source.
"Import from pod cell" feature may not ask for mappings related to a cloud library causing imports to fail when data resides on such a library.
In the GRC "Specify New Locations For Dedupe Database" screen, Gui shows duplicated access paths.
In the GRC "Device path answers" screen, the GUI does not auto populate Target media agent for some libraries.
Commcell Migration import may fail when you use the option 'skip data from conflict media' on silo data.
Export GUI dimensions are changed if default export path longer than the size of export text path.
Fixes/Enhancements to the Import from Podcell feature. Among them: Importing of libraries; the ability on the GRC to keep track of job changes happening on source.
Changes to SIDB SimulationGUI as per SIDB Simulation tool enhancements
- Support for existing pre-cooked DDB to start simulation tool.
- Simulates number of connections like real world. Earlier only one connection was possible.
Additional Instructions Note, on Windows 2008 and later, the simulation GUI JAR file needs to be started from command line.
Unable to add a mountpath to disk library when opening library and drive configuration window from "Libraries" node.
Add GUI support to incremental GRC exports
GUI changes to support source driven data aging.
Allow firewall configuration to be pushed to client from command line. But do not show firewall configuration in GUI. Additional Instructions Run InstallSoftware from GUI.
Fill in all the required details for job and save it as script.
Add Firewall configuration in xml file InstallFlags tag as follows:
Run the saved script.
Network Throttle Enhancements
View schedules from the commcell level can show individual schedules for de-configure client, but they are all greyed out and option to delete is also disabled.
Exchange Mailbox iDataAgent 2000, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, Exchange Mailbox iDataAgent 2003, PrimaryCIForExchange, Data Archiver Agent for Exchange 2003, DataArchiver Agent for Exchange
Description
The following problems are fixed in this update.
Exchange Mailbox backup job may fail on a folder with named properties.
Some messages fails to get backed up for certain mailbox on exchange 2007
Incremental backups are backing up large amount of Meta Data
Performance enhancements for pruning phase of DDB reconstruction.
SIDB Simulation tool enhancements:
- Support for existing pre-cooked DDB to start simulation tool.
- Simulates number of connections like real world. Earlier only one connection was possible.
- Inserts Secondary table entries according to the given dedup ratio to simulate the real life operation.
When target device is already mapped for Symmetrix Snap backup, mount fails.
When devices are in sync for Symmetrix and no device groups created, rename fails.
With nDisableConfigChange key present, a target device pre-mapped to proxy is not selected
With nDisableConfigChange key present, if a usable spouse device is not found, the operation should fail immediately.
BCV+TDEV type of device cannot be used as a BCV target
When target device is pre-mapped on proxy, mount fails on proxy.
When devices are synced and no device groups created, rename fails.
Fix for optionally not moving Symmetrix BCV Devices from original Device Groups to CV_PROTECTION_GROUP or the Device Group specified in Array Management properties during snap backup.
Adds support of allowing different device group names on different hosts for the same array.
Symmetrix VMAX snap backup may fail to mount the snap/clone device if the device is discovered after first attempt.
Media Mount Manager Service on MediaAgent may exit ungracefully during VMware ESX mount operation when devices are not visible to the VMware ESX Server
NAS SnapProtect File Scan fails when file paths are longer than 1024 characters.
Enhancement to support EMC Symmetrix TimeFinder/Clone Engine for Snap Management
SnapProtect may fail to mount snap on an a VMAX array when host WWN is part of cascaded initiator group
Support for snapping devices across device groups
Ability to add new target device types at runtime
SnapProtect jobs for vfiler clients with the option to catalog the snapshot fail with error "Failed to create indexing data for snapshots". This update adds support for cataloging vfiler snapshots.
Snapbackup using the NetApp Snap engine may fail during snap creation while trying to get filer credentials. This failure can happen when the application data resides on an NFS export which is mounted on the client using a filer IP address that is an alias for one of its Ethernet interfaces AND the array management entry for the filer is a different IP address. This failure can happen with both physical filers as well as vfilers.
Mounting a snapshot from a Snapvault/Snapmirror copy fails with OC 5.0, with error
"Unable to find device(s) corresponding to clone(s). Possible reasons could be that 1) We are using FC/ISCSI and the FC/ISCSI connection between the host and the filer is not proper 2) The OS didn't find the device corresponding to the clone"
Backup copy/Mount from Vault copy fails with error: [[Failed to create volume clone]
Error returned:[13044][Invalid volume name:]]. Issue occurs when secondary snapshot name contains special characters.
Auxiliary job may go pending with JPR "Error occurred while processing chunk ... Release reservation failed as the specified reservation was not found in the database table"
Garbage collector for SharePoint DataArchiver with EBS provider does not clean up the EBS temporary cache.
SharePoint DataArchiver does not stub published documents.
SharePoint Document backup of aspx files configured on a document library throws an exception to fetch webparts. Additional Instructions Create and set to 1 DWORD registry value dwUseExportApiForAspxFiles for backup under ..\InstanceXXX\MSSharepointDocAgent.
Script to delete containers for users who are not-enabled/deleted Additional Instructions To delete container belonging to ReviewSet/Export/Query Set Type
> qoperation execscript -sn DeleteContainer -si 'UserName' -si 'ContainerName' -si 'ContainerType'
'UserName' -- Owner of the container that needs to be deleted.
'ContainerName' -- Name of the container that needs to be deleted.[excluding the username]
'ContainerType' -- Optional.Default is ReviewSet. Type of the container that needs to be deleted. Can be 1,2 or 3. [1 - ReviewSet ; 2 – QuerySet ; 3 - DownloadSet]
Eg:
1.To delete Review Set [ PEKO(Deleted, 59)@efgz\My ReviewSet ] whose owner is [efgz\PEKO]
Run as : qoperation execscript -sn DeleteContainer -si 'efgz\PEKO' -si 'My ReviewSet' -si 1
2. To delete Query Set [ compuser2@ROBO\My QuerySet] whose owner is [robo\compuser2]
Run as : qoperation execscript -sn DeleteContainer -si 'ROBO\compuser2' -si 'My QuerySet' -si '2'
Skips backup of a duplicate DDB database.
UNIX ONLY :
- AIX snapshot fails, since Snapshot name is more than 15 characters.
- Backup is not converted to live volume when snapshot failed.
- Solaris SPARC support added.
Dedupe database backup when restarted due to corrupt or missing index may miss files. Additional Instructions Under the key "FileSystemAgent", add the entry "bDeleteShadowVolMapEvenIfSnapDeletionFails", type DWORD, value 1 only in the case where the backup keeps restarting because it cannot delete the snapshot created from a previous run of the job and it is imperative to complete the backup even if the old snapshot is left behind
When a vss snapshot operation fails during the snap phase due to any general snapshot creation failure the failure is reported as a loss of control process.
Dedup DB (DDB) backups may fail when the DDB location is on a volume which is mounted as a folder.
Adds support for the VSS open file manager option for the file system iDataAgent on Windows XP.
Adds retry capability to VSS OFM snapshots for all OS's if the current snapshot is deleted mid-job. Additional Instructions While the retry capability for the VSS OFM snapshots defaults to a maximum value of 3 internally, this can optionally be overridden to any positive, non-zero value via the following reg key:
under key: "FileSystemAgent"
create DWORD: "nOFMSnapMaxRetryCount"
with value: any positive, non-zero integer.
Auxcopy process crashes when content indexing LegalHold data
In a non-RMS environment, content indexing of a message with a RMS protected attachment fails, failing the entire job.
Emails CI job is failing with negative value getting pushed as data value.
Push only meta data for files of size greater than 1GB during content indexing
This update is also contains fix for failure which occurred while creating staging file.
Additional Instructions Please specify following registry key at HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\\MediaAgent on MediaAgent machine
Name : bDoNotSkipBigFiles
Type : DWORD (32 bit)
Value : 1048576( document size in KB.)
By specifying above key AuxCopy will only push meta data to CI Server of the documents which are greater than this size when using staging mode.
Auxcopy crashes while parsing an email to extract sender distinguished name for offline content indexing.
Restore from web search console may fail
Auxcopy.exe crashing on media agent causing Content Indexing and Aux copy jobs to fail.
CVD process on a UNIX MediaAgent restarts occasionally.
Prevent a job from getting copied at incorrect offset during restart.
Prevent AuxCopy.exe crash in certain error conditions.
Auxiliary Copy job may keep running at 99%.
Auxiliary Copy jobs from a dedup storage policy copy may randomly fail with user impersonation errors on Windows MediaAgents.
SnapProtect jobs for vfiler clients with the option to catalog the snapshot fail with error "Failed to create indexing data for snapshots". This update adds support for cataloging vfiler snapshots.
Jobmanager may be unresponsive due to high memory usage when an Auxiliary copy job is running.
DDB backup and DDB reconstruction using FS iDA may fail when DDB is hosted on a cluster Media Agent.
Installer crashes when CommServer returned a huge list of subclient and storage policy.
Windows installer in play mode populating the hostname as localhost, the registration of client caused the hostname of CS changed to localhost, eventually brought down the commcell.
Installation of client should fail with correct error message when trying to install with Cvd and EvMgrC ports that were already used by another instance.
Backup of a NAS subclient fails when multiple filters are present.
Extra error logging during network errors for better troubleshooting.
Commserve synchronization with CommNet server may fail with connectivity errors when the CommServer is synching with multiple Commnet Servers.
Nas backup converts Incr/Diff backup jobs to Full if intermediate cache is enabled.
Add support for OSSV agent movement to tape.
NasBackup continues to run even after failure in initialization of update index. Additional Instructions If index cache is shared between MediaAgents, in case of multiple data paths, then for NAS NDMP it is required to have job results directory in network share that is accessible between these MediaAgents.
NAS iDA Incremental and Differential backup get converted to Full if intermediate cache is enabled Additional Instructions If index cache is shared between MediaAgents, in case of multiple data paths, then for NAS NDMP it is required to have job results directory in network share that is accessible between these MediaAgents.
Making software more resilient of incorrectly set local hostname.
Restoring large number of email messages from Find operations might fail with job registration timeouts.
Alert email token may appear truncated.
Add support for Open System Snap Vault event generation.
After upgrade to 9.0, Alert Token is no longer being populated correctly in the alert, and nor is the file containing the restored files attached to the email.
Alerts not creating description in Windows Event viewer correctly when exceeding X number of Characters under description field.
A potential memory leak in EvMgrS when send log files operation is run.
When adding external group the browse window may show blank
EvMgrs memory may increase when logging in to Commserve
CommServe, SharePoint iDataAgent, SQL Server iDataAgent, SRMSQLAgent
Description
The following problems are fixed in this update.
Using the option "Disable Log Consistency" in subclient properties SQL Settings cause differential job to go to pending.
SQL non Full backups hang if subclient has multiple databases.
Ability to specify any databases to be use as Ondemand backup via a registry key to be kick off using commandline. Additional Instructions 1. From the CommCell Browser, navigate to Client Computers.
2. Right-click the <Client> and then click Properties.
3. Click the Registry Key Settings tab.
4. Click Add
5. In the Name filed, type <InstanceName>_<SubclientName>_OnDemandFilePath
6. In the Location list, type MSSQLAgent
7. In the Typle list, select REG_SZ
8. In the Value field, type the fully qualified path of the database list file.
For example: C:\DatabaseListFile.txt
9. Click OK.
SQL Backups do not appear to honor conversion rule sometimes.
EvMgrs crashes during restore of single db when SQL services are stopped on source SQL instance.
SQL restore is not impersonating proper user configured at the instance level.
Database state is not reflected in the restore dialog during single db restore.
The databases that gets deleted from SQL Server are not automatically removed from default SC.
Support for OnDemand subclient for FFG backups
When databases are online and user runs restore with "Recover Only" option then backend will
skip the recover only option but for FFG restore db will be online and only one FG will be offline in this
scenario we have to run the Recover Only even if db is online.
CVD on CS crashes during diffrential backup of readonly database.
CommServe, File System iDataAgent for Windows, Web Server
Description
The following problems are fixed in this update.
End user browse from web interface- When browsing for Recent Items , results are not coming up , same is working in compliance search
Backend support to delete all items in the reviewset
If an user is added to DL, he is able to see the mails sent to that DL which were content indexed before he was added.
Review Sets in Web Search Server application, which crossed their retention period become missing in 9.0 after migrating from 8.0 to 9.0
FAST query logs does not show up in default log level
Customer deconfigured clients, but some subClients still show in GUI as configured. Additional Instructions qoperation execscript -sn DeconfigureAgent -si client_name [-si IdataAgent]
Enhancement to allow changing the subClients/backupsets/instance/agents/clients associations to a storage policy's secondary copy via command line. (Previously this was only possible from GUI) Additional Instructions Usage :
run the following command from Base using qlogin
qoperation execscript -sn QS_modifySubclientAssociationsForCopy -si ''e=enable|e=disable'' -si ''sp=storage policy namename'' -si ''c=copyname'' [-si ''cl=clientname''] [-si ''a=AgentName''] [-si ''i=instanceName''] [-si ''b=backupsetName''] [-si ''s=subClientName'']'
here
1)enable or disable , storage policy name , copyname -- these are compulsory options and sequence is must
2)client name must appear after copy name
3) after client name (agent , instance , backupset all are choice parameters but child entity can not come befor parent entity ) some of the combinations possible
.enable|disable storage policy name, copy name, client name
.enable|disable storage policy name, copy name, client name , agent
.enable|disable storage policy name, copy name, client name , instance
.enable|disable storage policy name, copy name, client name , backupset
.enable|disable storage policy name, copy name, client name , subclient
.enable|disable storage policy name, copy name, client name , agent , instance
.enable|disable storage policy name, copy name, client name , agent , backupset
.enable|disable storage policy name, copy name, client name , agent , subclient
.enable|disable storage policy name, copy name, client name , agent , backupset , subclient
.enable|disable storage policy name, copy name, client name , agent , instance, subclient
.enable|disable storage policy name, copy name, client name , agent , instance,backupset , subclient
the entity hierarchy must be maintained client->agent->instance->backupset->subclient
for example the following command is invalid
.enable|disable storage policy name, copy name, client name , agent ,backupset ,instance , subclient
as backupset should not be given before instance
Up Button is disabled for the topmost folder as it is no longer needed.
Comments do not have create time or modified time values on upgraded entry. In such a case - time must not be displayed in the web UI.
Email (Exchange/Lotus notes) browse support introduced.
Restore to client functionality added from browse results.
In advanced search options multi group criteria was not honored.
Enhancement to display a disclaimer or agreement dialog before login.
Find Support provided from browse in web client
Resizing the Find Dialog Dynamically based on the Combo Box selected especially for Between and Before fields
Backup Time range support in Find Dialog
Facility to create review set at run time while adding Items to Reviewset from Browse
Proper error message if permissions not available for Restore to Client operation from web client
When browsing / drilling down through browse results incorrect results appear due to Polling
Right click Download option will automatically restore and download the item
Up Button is removed (MR:60919)
Fix for tab title showing as "Unknown" is fixed for for linux clients (Browse / Find) results
Download option would not ask for confirmation
Honour time selection correctly when performing Find operation
Support for additional restore options
Emails with empty subject lines will be have "No subject" in the Subject column
If we open browse results where we have more results that cannot be viewed with out scrolling down, then after scrolling down a bit, by selecting one or more items and do restore, then the selection gets cleared and scroll goes back to top.
Localization update pack for Japanese
Removed unnecessary logging.
Ability to turn on and off Lemmetization from the Search admin page
Additional Instructions This update will need web server related update to make the setting work from web client admin site.
Laptop Backup Web UI
Date Time Format displayed for languages like English (Australia) is not displayed correctly as per the the region. Additional Instructions The date time format is displayed as per regional language setting used in browser options when visiting web client.
Fix to support login from IPhone/IPad Native App
Support for smart filters and groups at review set and legal hold. Filters can be created by sender name or path
Support for searching Legal Holds
Downloaded files have the original names.
Fixes to support processing of 200,000 items as part of content director policy
Lotus Notes eMail search results have empty "from" column in the search result page when viewed in emails view.
Option to remove applied refinements is more intuitive
Auto filling the domain Name if domain Name is entered in the username text box
Fix for Find similar option not working
Spacing between buttons on toolbars/dialogs may not be proper. Additional Instructions To enable filtering and grouping feature, run the following command from (command prompt by navigating to install folder\base folder) on any machine inside your commcell:
qoperation execscript -dbn DM2 -c 'client Name' -sn UpdateSettingValue -si 'ALLOW_RESULTS_GROUPING' -si 'TRUE'
'client Name' -- client name of the Webserver machine
Enhancements to support mobile apps
Using the iPhone/iPAD application with Single Sign On enabled we receive the following [please check comcell connectivity] Additional Instructions For full functionality, update 35947 must also be installed.
Improve performance of Web Search Client.
The advance search option to change language does not work when the web client is installed in non english OS or if the selected language in browser options is other than English,
Improve performance of Web Search Client.
The advance search option to change language does not work when the web client is installed in non english OS or if the selected language in browser options is other than English,
Resource and image extensions converted to PNG format.
Duplicate columns are displayed in the search results page
Foreign language support for webclient
Duplicate columns are displayed in the search results page
Skip invalid archive files while submitting for restore
Show restore status of items accurately
Searches do not return accurate results when criteria is specified in the discovery tab
Current selection is lost when search hits are downloaded via browser
Spelling correction in job action message.
Fix for Preview in web search client of lotus notes emails gets rendered as HTML, which is not readable.
CommCell Console, Outlook Add-In Client, Web Server
Description
The following problems are fixed in this update.
Updated help content for CommCell Console
When changing Sub-Client policy content, filters may get erased.
When clicking on the Add/Remove button in the toolbar -> Upgrade software, the client computers node does not display the list of clients when we expand it(As all the clients are of same version as CommServe). If we leave all boxes unchecked and hit OK, an Upgrade job is launched containing every client.
Firewall configuration cannot be pushed to clients during push-installs. With this fix, firewall information can be added to xml file generated by save as script before performing push install on client. Additional Instructions Run InstallSoftware from GUI.
Fill in all the required details for job and save it as script.
Add Firewall configuration in xml file InstallFlags tag as follows:
Run the saved script.
"Enable SnapProtect" option missing in Chinese console.
Find feature for VM's via WebConsole.
Unable to view the Contents inside the folder, if the folder name is numerical.
QSNAP option is not applicable for UNIX DDB subclients.
In the GRC "Specify New Locations For Dedupe Database" screen, Gui shows duplicated access paths.
In the GRC "Device path answers" screen, the GUI does not auto populate Target media agent for some libraries.
Commcell Migration import may fail when you use the option 'skip data from conflict media' on silo data.
Export GUI dimensions are changed if default export path longer than the size of export text path.
Performing "Recover Current selected " for Exchange Mailbox Archiver may fail to restore data
No updates will be installed if older version of Sharepoint Archiver is present on the machine.
Enhancement to allow DAG Master Client creation to discover member servers by querying child domain instead of parent domain
Unable to discover the databases using a DAG Client.
ExtiDBBackup.exe is not starting on the exchange 2003 server.
Exchange integrity check in snap protect jobs may time out when verifying large databases. Additional Instructions Timeout has been substantially increased to 24 hours max wait time per EDB file being checked, however, if this is still not enough, a reg key can be used to override it to a higher time period, lower time period or disabled altogether if time necessary for completion is unknown. To create the key, create the following value:
under the section key "MSExchangeDBAgent", create DWORD "nIntegCheckMaxWaitHours" and set to one of following values:
0 = disable all waiting, backup will infinitely wait for all checks to complete with no timeout to the livelyness check.
1+ Non zero value = Max time (in HOURS) to wait for each individual file to complete an integrity check.
Exchange 2010 DAG backups losing subclient contents.
There's no proper JPR for integrity check failure for exchange database VSS backup. Additional Instructions Database discovery for DAG was protected from re-accessing by this update. There's only one backup job on a DAG client could conduct database discovery at the same time. When one job is discovering, the other job which is going to discover must wait for the first job finishing its discovery. The wait time could be configured through the following registry key on each DAG member server:
Name: DiscoverWaitTime
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\InstanceXXX\MSExchangeDBAgent
Type: DWORD
Value: Seconds
Default Value: 300(seconds)
Exchange 2007 DB backup discovery is finding Storage groups from another cluster virtual group.
Member servers cannot found if there're Chinese characters in AD when configuring exchange 2010 DAG client.
Exchange Database backup may time out and fail in cases where there are a large number of databases or subclients for the agent.
The SQL view "CommcellMediaInDrives" may not recognize a media in a drive until manual intervention is performed by for example running a verify media operation.
Client changes for backup of newly added file content.
Prune stubs using stub rule “Prune stubs only after n days” is pruning stubs even if they do not qualify for pruning.
DDB Reconstruction may fail on certain cases from File copy based DDB protection.
Support for filters using only a volume wildcard character.
Stub prune query was using wrong parameter for an Appmanger query.
Reparse point of a Add-On Data Archiver stub is being modified after a Synthetic Full backup.
Windows Local File System Archiver with SP4 will disregard rules when adding new content to a subclient.
DPM client INCR jobs get into Pending due to "UpdateIndex" failures.
Several file scan processes come up from the same job when running under heavy load.
More than 1 backups going to the same DDB store may fail to connect to the DDB.
Incremental Backup jobs may go to pending with error "signature generation failed on client side", if Client Side Signature Cache (CLDB)is enabled and CLDB Folder is part of the subclient Content.
Backup jobs may go to pending with error "Cannot start process SIDB2", if deduplication is enabled and Deduplication DB folders are part of the subclient Content.
CommServe, ResourcePack, Web Server, CommNetServer
Description
The following problems are fixed in this update.
Fix handle leaks for QSDK.exe.
Enhancement to optionally specify the temporary folder which is used during qscript executions.
Additional Instructions The path can by set by the following registry key:
Add a string value called "sSCRIPTSTEMPDIR" under Base and set its value the directory to be used.
If not set, the default temp folder will be used (which in almost all cases is what should be used).
Unable to run the Expired SQL Script using Qscript utility
SharePoint offline mining browse fails with exception "Internal error" and fails to browse details for web applications configured through same port or configured on different zones. Additional Instructions The 9.0 update 34229 is required on CommServe for successful recovery operation of selected items from Offline Mining Browse.
SharePoint Document Browse Data from SQL may list some web application with empty URL.
SharePoint Document Browse Data from SQL fails and logs have no failure reason.
Enhance SnapProtect for NetApp to handle different names for files servers. This enhancement includes supporting multiple interfaces on a single file server using one Array Management entry. This enhancement can be used for VMWare configurations where a public address can be used in array management while the VMWare server using a private network to access NFS exports from the file server. Also handled in this enhancement are handling different names for the same interface including recognizing full qualified names, not fully qualified names, and IP addresses as being the same array.
SnapProtect jobs for vfiler clients with the option to catalog the snapshot fail with error "Failed to create indexing data for snapshots". This update adds support for cataloging vfiler snapshots.
SRM enabled NAS Clients - Not able to update host name on credentials dialog
Clbackup may crash when Quota configuration data output has errors
SRM NAS Data collection for Netapp filer may fail with error 'Cannot insert duplicate key row in object 'dbo.SRMNASNFSShareHistory' with unique index 'SRMNASNFSShareHistory_idx2'". Additional Instructions None
SRM NAS Discovery job fails with error: "Failed to query Data Mover of NFS share"
-When restoring vm to vCenter, too many "Clear Lazy Zero" messages would fill out the vCenter's message panel.
-Possible fix for production data stores getting renamed.
Additional Instructions When restoring over san mode to vCenter the "Clear Lazy Zero" messages will be prevented when both "SAN" transport mode and "THICK" disk provisioning are selected.
Restore of Hyper-V VMS spread across multiple volumes may fail.
Find feature may not return any results when index restore requires to read from more than one media.
Find feature may not return any results when index restore requires to read from more than one media.
Auxiliary copy job may go to pending with JPR 'Failed to retrieve drive pool information.' when the source copy has multiple datapaths.
Restore job JPR does not have the actual media information when source media is unavailable.
JPR for Index Restore job does not show the barcode when required media is not in library
Backup jobs running to standalone library may not use active media in the drive due to JPR "Media in the drive is already assigned. Replace this media."
Restore job fails with JPR "Media is not accessible from data path selected." when using Centera library.
Oracle RAC restore may fail with Job Pending Reason "Failed to retrieve drive pool information." when using multiple nodes.
Auxiliary copy job may failed with Job Pending Reason "Failed to retrieve drive pool information."
Auxiliary Copy may not run using all available streams when reading from shared disk library due to dangling reservations.
Space on disk library may not be freed up due to dangling reservations.
Auxiliary copy job may go to pending with JPR 'Failed to retrieve drive pool information.' when the source copy has multiple datapaths.
Restore job JPR does not have the actual media information when source media is unavailable.
JPR for Index Restore job does not show the barcode when required media is not in library
Backup jobs running to standalone library may not use active media in the drive due to JPR "Media in the drive is already assigned. Replace this media."
Restore of migrated jobs belonging to a copy with encryption and de-duplication enabled may fail with error
"Description: Buffer is encrypted, but cipher has not been instantiated or has not been initialized with a key."
Size criteria set on secondary copy properties in source commcell isn't retained in the destination commcell after migration
CommCell migration of data associated with a deduplication store to the original CommCell in which the store was created might create a new store instead of associating the data with the existing store
Reports might not show correct information regarding the migrated deduplication stores
CommCell Migration export may fail with error
"Sub-client capture request failed"
Adding a filesystem subclient via qmodify schedulepolicy may remove some of the file system associations from the schedule policy. Also we are unable to addition/removal of a clientgroup from a schedule policy.
Commcell migration enhancement: Support migration of ownership of clients while migrating security information.
DataAging job may fail with "Failed to update job histories with database error [xxxx]" error.
Mount media may fail for the Tape Library.
Detect Fujitsu ETERNUS VTL correctly on UNIX.
Send SetScratch command to Fujitsu ETERNUS VTL during mounting media for Aged/Recycled/New Media when the register key DWORD value nDoFujitsuVTLSetScratch under MediaManager section is set to 1.
SQL scripted restores may fail after upgrading CommServe to V9 if input file is in ini file format
DataAging may not give proper JPR when Oracle / SAP cross check fails on client.
Add support for incremental GRC exports
Prevent physical pruning of data on migrated copies from GRC commcell
Source driven data aging for GRC - Support pruning the migrated metadata in the GRC's database according to the job statuses on the source
Commcell Clone change to disable new backups into the mount paths that were created before commcell clone operation. New mount paths have to be created for backups after commcell clone operation.
In rare cases, incorrect volumes may be pruned from disk in case of commcell migrated/ pod cell imported data.
Installing a service pack may fail if a commcell clone was performed.
Disabling DataAging for all GRC copies
CommCell Migration import may fail when a deduplication enabled copy is migrated from a CommCell 1 to CommCell2 and then again to another CommCell 3 from CommCell 2
Commcell Clone operation may fail after a DDB recovery has been done on a Commserve.
Fix for CCM for Changes for DDB backups using FS iDA.
Add support for incremental GRC exports
Prevent physical pruning of data on migrated copies from GRC commcell
Source driven data aging for GRC - Support pruning the migrated metadata in the GRC's database according to the job statuses on the source
Commcell Clone change to disable new backups into the mount paths that were created before commcell clone operation. New mount paths have to be created for backups after commcell clone operation.
In rare cases, incorrect volumes may be pruned from disk in case of commcell migrated/ pod cell imported data.
SAP for MaxDB, SAP for Oracle, Documentum, Oracle iDataAgent
Description
The following problems are fixed in this update.
SAP Agent Log only jobs are not pruned from job history
SAP/Oracle Backups encounters failures with VCA enabled and command line backup of Archive Log backup util_file involving second copy was becoming single stream while continuing with the First copy of the logs.
Oracle Restore fails after Commcell migration.
Oracle Snap backup completes after encountering indexing errors
Oracle ASM snap support for block devices without ASMLIB
Oracle rman backup copy restarts from the beginning without skipping the backup pieces alreday backed up
Oracle backup copy on source fails if the source has block change tracking enabled
Skip oracle archive log volume snap based upon subclient option.
Snap protect support for Oracle RAC databases through Oracle Agent.
Honour "Disable Failover Restore" option during restore.
Oracle RAC Backup fails after upgrading to 11.2.0.2 version. Additional Instructions Please set registry key sUSERMANSENDCMD to Yes on Commserve section on CS.
Oracle IDA does not set Job pending reason when it is not able to login to the database.
Informix IDA does not set Job pending reason when conection to client services can not be established.
Oracle Backup goes to pending if client can not be contacted in 2 minutes.
Update event messages if client cannot be reached during Oracle crosscheck.
Communication delays are possible if FwConfig.txt is changed due to e.g. client group modifications
Connections across FW may be disconnected abruptly with "Try again" error
VM live browse will fail during registration of the virtual machine from hardware snap.
Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table".
Additional Instructions none
SDT PL setup may fail if the client's hostname resolves to 127.0.0.1
DASH Copy enhancement to reduce the chances of out of sync errors between the source side CacheDB and DDB.
In GalaxySCM dialog, status labels for few services were shifted down for foreign languages after applying SP4. Fixing the position of the status labels.
Install Updates will give a success message when a utility gives an error.
Cluster CommServe requires a reboot while installing updates that need SQL services to be stopped.
RemoveUpdates from CommCell Console fails when nothing to remove but the job details does not give a good message
RemoveUpdate fails to remove database update in a case where the obsolete update does not have install.sql
Installing update for Virtual Server iDataAgent fails with timestamp error
Package install fails during 'Installing Servicepack' phase
Installing Service Pack could fail for database patches where a script had to run before a stored procedure.
'SQL Server Agent' resource does not come online after service pack install or uninstall.
Installation of CommServe on cluster physical node using Express DVD fails
Installing update fails with timestamp error for VirtualServer IDA
After Install or Uninstall updates, reboot may be required if stopping SQL service does not free locked files.
Installing DM2WebClient package fails
Installation of updates or service pack can fail with timestamp or version error during package installation or update installation.
Increase wait time for dedup processes to stop during Install/Uninstall of updates.
Installing or Removing virtual server driver update fails
Installation of following fails from ISO
- Installing Service Pack from ISO fails with timestamp error
- Installing packages from ISO fails with error "Failed to install Servicepack"
Occasional failure in Installing or Removing Updates on cluster setups due to crash
SSO may not work after installing updates without restarting web client services again
Installing update fails with timestamp error for TestAutomation package
Commcell GUI patching might fail.
Installing updates on 1-Touch WinPE can fail
Skip installing SnapProtectImport.exe that is part of ResourcePack due to funtionality issues.
DM2 web services may not come up on the machine after installing updates.
After installing/removing updates, Simpana services may not come up properly due to missing files
Following issues could happen after package re-install scenarios:
Installing updates may fail
Simpana binaries remain at RTM version
Simpana services may not come online due to binary mismatch
- Package install fails using July DVD
- Added new binaries [CVManagedUtils.dll, DmWebPartV4.dll, CVManagedLogger.dll] for GAC registrion
Removing binary CVManagedLogger.dll from GAC registrion
Laptop backup utility may not start on machine reboot
- No updates will be installed if older version of Sharepoint Archiver is present
- Abort installation of any DB update failed to install
- No updates will be installed if older version of Sharepoint Archiver is present on the machine.
Copy SnapProtectImport.exe if it is part of any update
Laptop backup system tray icons start on non laptop file system agents.
Text in InstallUpdates window could appear distorted for Portuguese language.
foreign language support for interactive install and remove updates
Skip Timestamp and version check for OSSV packages - OSSV plugin, VSS Enabler for OSSV, SnapVault Open Systems Enabler.
Fixing issue where Aux copy job may log database error events like "Failed to update job info for job [XXXXX] in table [JMJobStreams] for field [compBytes, unCompBytes, writeTime, numFiles, numFolders, numFailures, numSkipped] with error [Error for operation [Update] on table [JMJobStreams]. No rows were affected or no data was returned from the operation.]."
Jobmanager Memory leak fixes.
Clients that were already up-to-Date were included under successful clients list instead of "Already updated"
Push-Install is not working as expected in case of mini brands.
- Package install fails
- DM2 web service may not work properly after installing updates
Updating clients pointing to this unix remote cache might fail with ServicePack missing error.
Localization enhancements for the Simpana gui and Web Console.
No updates will be installed if older version of Sharepoint Archiver is present on the machine.
Remove monikers from options when selecting a directory to restore to
Operation status panels are not hidden properly if another tab showing
User may see a "Invalid Domain Null" error on login dialog in webconsole. Additional Instructions none
SSO from Webconsole Portal for Laptop Backup may not work.
Web Console configuration file is set to log debug information on the server instead of just errors. This could potentially slow down the server and result in large log files.
In the details view of the "Current restore status" panel in Laptop Backups, the "Data protected" fields should instead read "Data restored".
Web Console gui is calculating data sizes using decimal instead of binary KB/MB (dividing by 1000 rather than 1024), resulting in size mismatches shown between the Java console and the Web Console.
When using the Safari browser, the delete buttons in the Laptop Backups manage content dialog only work if you click on the edge of the button.
When your browser session times out while using the Web Console, it is supposed to detect it and redirect you to the login page. Instead, it shows popup error messages whenever you use a function that tries to talk to the server.
When browsing file content an error message saying "Desired Response not received due to unexpected problem on server." is received when client is not reachable.
The CPU usage option is not getting saved for automatic schedules using Web Console.
Unable to load/view schedules from schedule policies using the web console.
Special folders like Desktop, Videos, and Music should not be allowed in content excludes in Laptop Backups.
If you initiate a restore job from Laptop Backups, and an error occurs, no error message is shown to the user.
Backup and restore jobs monitored from the Web Console gui are incorrectly showing 0's for data protected numbers in some cases.
VM Provisioning feature - Web UI
Webconsole enhancements for Laptop2.
Webconsole enhancements for Laptop2.
New feature support for VM Provisioning.
Issue 1: If a laptop goes offline during a backup, the Web Console should show it's job status as "Queued" instead of "Running".
Issue 2: Improved capabilities support in Laptop Backups. Many functions can now be enabled or disabled/hidden using owner capabilities. See the documentation for details.
Issue 3: In restore dialog, the "restore to same folder" should not be enabled unless you are restoring to the original client.
New feature support - VM Provisioning.
Web Console shows all web apps.
When browsing file content an error message saying "UNKNOWN_ERROR" is received when client is not reachable.
The manage content dialog in Laptop Backups allows you to add duplicate items.
Laptop Backups should not allow you to change content while a backup is running.
Web Console Enhancements
Virtual Center Plugin from vcenter gui.
Added more columns to the "Recent jobs" table in Laptop Backups
Disabled "restore to same folder" option when user does not have restore in place capability
Logging in to the web console may fail with the error "Failed to get login context" Additional Instructions Refreshing the browser twice may fix it or else clearing the browser cache fixes it.
VM Renewal time should be validated against the current time instead of the vm creation time.
Retain the url, instead of defaulting to the home page, on session time out.
Added support for viewing/restoring/downloading different versions of a selected file from Laptop Backups
Added more informative error message if you attempt to change the content to back up for a client while a job is running
Fixed issue with navigation links/buttons while browsing backup data from Laptop Backups
Enabled sorting data by column when selecting files to restore in Laptop Backups
Added feature to refine a Find request after results are displayed
Fixed icon on browse button in restore dialog (icon was cut off slightly)
Fixed issue where restore icon is disabled when user has restore rights
Fixed issue when switching between apps within the Web Console
From the Web Console, user is unable to view details for schedules that were not created in the Web Console.
Foreign language support for web console
Adding ability to recover a vm from within vm provisioning interface on the webconsole.
The filename prompted for download through webconsole doesn't match the original name of the file.
Enhancement to support additional languages in web console
VM Plugin does not load if SSO is enabled.
Find feature for VM's via WebConsole.
Unable to view the Contents inside the folder, if the folder name is numerical.
AD backup does not go down when suspending the job.
Offline restore of Active directory object with large attribute goes pending.
Granular AD backup fails for the users who have multi valued attributes with large number of values.
Granular AD restore fails if the object to be restored has attribute memberOf with a large number of values.This happens only for memberof attribute.
External group lookups fail after waiting for 20 seconds Additional Instructions The default time out value has been now changed to 60 seconds from 20 seconds. If this is not sufficient (typically in case of directories with large list of objects but are hosted on not so powerful hardware) then create a registry key DWORD value under CVD section in the Simpana registry with valuename as 'nPageSearchTimeoutinSeconds' and set its value to the number of seconds desired for the timeout to happen.
Also create a registry key DWORD value under CVD section in the Simpana registry with valuename 'nLDAPclientPageSize' and specify 100 as the number of records to be retrieved in each page search. This can be reduced further based on the performance of the Active Directory server.
The use of these registry keys should be done only after careful scrutiny of the AD environment and consultation with CommVault Support.
SSO from Simpana GUI fails with error "Failed to get properties for user"
AD iDA backup fails when AD user names contain a comma with the following error "Error searching Invalid DN Syntax" during the incremental backup
Vault Tracker export is not working for the IP Library.
Intermittently, the job failed alert set for Vault Tracker are sent twice when the action is aborted and one of the two is sent without failed media list.
Folder based Auto-Discover support for subclient content discovery.
Enable Folder based Auto Discovery Feature. Additional Instructions 1. Make sure that the content for each subclient is not overlapping with other subclients. This should be easier to achieve by naming each subclient with the folder it is backing up.
2.Creating a custom subclient requires some content to be assigned. It is advisable to assign one of the databases matching with subclient content pattern.
Exclude Backup Disabled subclients from capacity usage calculation
Count last backup of NDMP jobs instead of biggest job. Also do not count incrementals.
Capacity usage is different between report and dashboard.
License Capacity Usage report doesn't include EDC jobs with deconfigured, deleted, or activity disabled subclients.
CLA capacity calculation was showing more for following reasons
- was including all backupsets for NDMP agents.
- was including snap protection jobs even after new jobs with snap option disabled are run.
CLA usage will not include DDB jobs.
CLA usage included jobs from Content Indexing servers.
CommServe DR backup jobs may fail after a commcell migration.
Saving DR backup settings may fail with "Failed to save Disaster Recovery Archive Group in CommServe database" while trying to set the DR backup storage policy after a commcell migration
Additional Instructions This update is to fix migrations going forward - if the issue already happened sql script form no:10860 has to be used to fix the DB
Fix for the following issue: If migrating a client from commcell 1 into commcell 2 and then capturing that same client on commcell 2 and merging it back into commcell 1, the client will get deconfigured.
Lotus notes emails restore status is not updated correctly in the webUI
Staging files are not cleaned up after restoring Lotus Notes Emails
Restores from Web client leaves a lot of restore processes hanging
ExchBackup crashes while archiving more than 100 mailboxes.
Slow throughput for Exchange mailbox backup jobs Additional Instructions To enable new functionality to improve performance please enable this registry key
Name: OptimizeBackup
Location: \MSExchangeMBAgent
Type: DWORD
Value: 1
Mailbox Restore hangs on missing chunks with Skip error option enabled
Exchange 2010 backups are backing up the deleted item retention times multiple times for each folder in the mailbox
Exchange 2010 MB restore is duplicating data even though overwrite or skip option is selected
Backup or Archive fails when CreateProcessSpecificProfile key is turned on
Restore fails when CreateProcessSpecificProfile key is turned on
After upgrading from version 8.0 to version 9.0 a "SRM Actions" alert appears in the alert list window as disabled and cannot be deleted or modified. The alert needs to be properly deleted because it is no longer used.
Fixes a missing dll from the SharePoint Doc package
Sharepoint document agent restores complete with incorrect calendar item metadata.
Sharepoint document agent backup of aspx files configured on a document library throws an exception to fetch webparts. Additional Instructions Enable below registry setting for backup:
InstanceXXX\MSSharepointDocAgent\dwUseExportApiForAspxFiles (Dword) 1
SharePoint DataArchiver migration utility will not migrate MS Word documents.
List Template Web Template, Web Part, Master Page, Solution, and Theme Catalogs are now skipped for stubbing
SharePoint Document Backup using direct database access fails for Views with errors "Failed to get view's properties using webrequest."
SharePoint Document Backup using direct database access fails for Views with errors "View does not exist" or "The operation has timed out".
SharePoint DataArchiver with EBS provider does not archive properly documents with unicode names.
SharePoint DataArchiver EBS Migration tool did not removed columns "Archived" and "Stub" for Libraries with Doc/Docx files only.
During Install of SharePoint DataArchiver with EBS provider there is RegisterExternalStorage.exe failure when Farm is not accessible by the account running install.
SRM NAS Data Collection Job may fail with error "Cannot insert duplicate key row in object 'dbo.SRMXMLRepNASNFSSharesView' with unique index 'SRMXMLRepNASNFSSharesView_idx1'".
Adds option to configure/deconfigure multiple MediaAgents together for Shared Devices in Library and Drive Config Tool.
Adds OpenStack Object Storage support.
Editing DDR properties for upgraded agents shows "Received error that the File System Data Agent needs to be installed", but the agent is converted to CDR.
Allow run schedule policy for specific entity only.
Enable or disable an alert will remove send notification properties. If a disabled alert is enabled the "Send individual notification for this alert" get disabled. At that point if the alert is enabled and modified to include the "Send individual notification for this alert" option it then disappears once the alert is disabled
Do not allow DDB subclient creation for 8.0 Clients
"Use VSS" option cannot be unselected for File system Archiver agent
User can delete Schedule Policy from the associated entity schedule view.
Feature Support for Virtualize Me:
Improves the ease of configuration of large number of shared mount paths for Shared Disk Libraries.
Afer customer upgraded from v8 to v9 the users who are a member of the DBA group when the click on the Advanced button when editing a job schedule the button goes grey and the advanaced dialog box does not appear. When you does this same operation on the v8 server the advanced dialog box appears.
Wording change for the pop-up while enabling encryption on an Inline Copy.
Sorting on the Free Space Column on a Mount Path of Disk library is not working.
Not showing the correct selections in the Datapath tab of the Advanced Backup options screen.
Media Refresh option should be disabled for DeDup copies.
'Set Media Location' dialog does not expand the media list vertically when screen is resized.
NAS iDA restore to Windows / UNIX client with more than 1 million files fails with error "NdmpRestore::monitorFilerandJobMgr: message processing returned fatal error, exiting".
Content indexing for NAS data fails with error "NRDS_Error: CVDumpParser::getNextCxFileHeader : Unable to read file header"
Selective copies may select jobs in a time period that do not fit the selection criteria. Note: a portion of this fix needs to be enabled - see additional instructions. Additional Instructions This update will only prevent selection going forward - those jobs that already got selected for aux-copy should be manually marked 'Do Not Copy'
In addition, a portion of this fix which is timing related needs to be turned on manually. Follow the following steps to do this:
In the Media manager configuration parameters, there is an option called:
'Wait for scheduler to update the next scheduled backup time before making an auxcopy job selection' - set this to 1 to turn on the fix. This should in general only be performed when advised to do so by the software vendor.
Selective auxcopy configured to pick up last scheduled backup in a time period may erroneously pick up first backup in the time period when the scheduled policy is configured to backup all clients for an agent type. Additional Instructions This update will only fix job selection going forward, for selections that already happened, you need to manually unpick the jobs and pick the correct jobs for selective copy from the GUI.
SharePoint iDataAgent, SQL Server iDataAgent, SRMSQLAgent
Description
The following problems are fixed in this update.
Restore job hangs on a database and eventually fail with error "A previous restore operation was interrupted and did not complete processing on file 'xxx'. Either restore the backup set that was interrupted or restart the restore sequence"
Restores may fail from Variable Content Alignment enabled backups.
Dedupe not working for Synthetic Full backups
De-duplicated synthetic full job for Exchange granular agents took more space on disk.
Dedup effect on NAS iDA is less than 8.0 after the upgrade.
Support for backup of well known folders for computers using non-English Windows OS.
Enable default configuration settings during content indexing jobs
Content indexing job would fail with the reason "Cannot create the heap for storing batch contents."
Additional Instructions Noticed few other issues durign friendly testing which are not yet handled by this form:
staging file invalid handle issue
failure to Close file handle
Failed to submit batch due to content api exception
The issues fixed by this update:
default reg key values
CVD out of memory issue
Backup Monitor tool to honor user credentials from RegisterMe.
Backup Monitor tool fixes for Mac
Monitor Tool doesn’t automatically load to the taskbar during user login.
Backup buttons are not activated (No privileges) before first backup starts.
Flickering at the bottom left hand corner of the progress bar on the monitor tool for mac.
Laptop monitor window focus not on top when clicked
Job type may be missing for VM provisioning jobs
SIDB process gets stuck and remains in that state indefinitely during process exit sometimes.
Typo in CVDiskPerf tool output.
CVD process may exit unexpectedly on certain error conditions.
Adding an option to use physical machine's interface/DIPs for VM backup traffic
New media are not detected after adding the media to the magazine for some libraries.
New media are not detected after adding the media to the magazine for some libraries.
New license support:
-- Dell Snap Management license
-- Subscription Usage Based licenses
Expired license for application error may still occur after a license key with updated expiration date is applied.
Users may receive alerts for unlicensed capacity license feature.
License check fails with Decryption failed in SimValidLicenseCheck
Unable to apply IP Change license file after upgrade to 9.0.
Deconfiguration of Media Agent may fail with DB error due to a dangling association with a disk library.
MediaManager service on CommServe may leak memory when there is a large number of pruning occurring of deduplicated data.
License error may be shown during re-installation of client on replaced hardware.
Backup job may fail with JPR "Mount path does not have enough reserve space" when the current disk library with two or more mount paths reaches the reserve space. Job does not fail over to the other datapath that has enough space.
Load drive request fails with Access Denied error. Additional Instructions Please create registry DWORD bRetryTapeOpenError under MediaAgent section of registry. The presence of the registry itself enables retry, the value does not matter. Please create appropriate entry in .properties file under MediaAgent directory on Unix MAs.
Fix for CCM for Changes for DDB backups using FS iDA.
Core jobs may become pending when total usage of enterprise jobs and core jobs are over capacity limit 100% but still under upper limit 110%.
Increasing MediaAgent limit from 300 to 1000 for enterprise OEMs and 2500 to 3000 for clients on a DBUpgrade
When a license fails to apply due to an IP address mismatch, display the next step to be taken on the error message. The same pop up error message should also be shown on the DR GUI too.
Change the wording in licensing logs that are a part of 'view logs' on a pending job
Enhancement for Dell disk array configuration.
Enhancement for Fujitsu ETERNUS VTL support.
Improves the ease of configuration of large number of shared mount paths for Shared Disk Libraries.
Exchange Mailbox iDataAgent 2000, CommServe, Web Server, Exchange Mailbox iDataAgent 2003, DBUpgrade, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, DataArchiver Agent for Exchange, Data Archiver Agent for Exchange 2003, PrimaryCIForExchange
Description
The following problems are fixed in this update.
A subclient had "dedup" disabled on a subclient. When the backupset that this subclient was part of was associated to a subclient policy, the subclient still behaved as if dedup was disabled, even though the property showed it being "enabled" in the subclient policy definition.
A subclient had "dedup" disabled on a subclient. When the backupset that this subclient was part of was associated to a subclient policy, the subclient still behaved as if dedup was disabled, even though the property showed it being "enabled" in the subclient policy definition.
Enhance the DFM/OC import tool to import the DefaultProvisioningPolicies and DefaultProtectionPolicies associated with a storage service.
AuxCopy fails with job pending reason indicating “Failed to query host information from DFM Server:[hermes] Error returned:[21002][host-list-info-iter-end: Iterator cannot be deleted.]”. Failure occurs when there are a large number of vfilers on the storage server hosts seen by DFM/OC.
Exchange snapbackups on a NetApp filer fail if HTTP is not enabled on the filer because a snapshot is not created within the VSS 10 second timeout period.
Speed up name resolution between the Commcell and the DFM/OC server.
File level recovery support from Snap backup of VM that span multiple datastores.
New feature support for "Virtualize Me".
Fix for retaining VM guid from while performing in place restore of a VM.
Services may go to unknown state when jobs are run against a vCenter that contains VMs on a ESX 3.5 host
Fix for Fastpass discovery to compute capacity license for TSM setup.
Support for auto mounted paths for index cache directory. Additional Instructions Registry key 'EnableAutoMount' under 'EventManager' on unix should mount the path by opening the directory first. The following stat calls will return correct sizes for the folder.
Enhancement in NAS iDA snapshot restore to do snap-restore in case of files and luns restored back to the same file server volume where the snap was taken.
Running parallel Hyper-V VM restores from Snap backup may cause Communication service on MediaAgent to crash.
Virtual server snap restore might fail with a combination of round robin datapath and catalog server configuration.
Simultaneous Hyper-V restore jobs may fail under certain conditions.
Hyper-V backups may complete with errors due to few VMs which are removed from sub client content.
Hyper-V Restores will complete with errors if the backup only contained some VHDs.
Guest Windows 2008 R2 Virtual Machine support for VSA Snap Protect Backup.
vSphere 5.0 support for Virtual Server IDA snap protect backup with VM disk on different datastores.
Exchange Mailbox iDataAgent 2000, Exchange Mailbox iDataAgent 2003, OfflineMiningExDBEndUser, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, DataArchiver Agent for Exchange, Data Archiver Agent for Exchange 2003, PrimaryCIForExchange
Description
The following problems are fixed in this update.
Exchange 2010 public database registration fails for Offline Mining Tool with initialization error -1809
Exchange Offline Mining Tool not showing Unicode characters correctly in the GUI or after restore.
Out of cursors error during Snap Mining operation (Jet error -1013) causes backup of mailboxes to fail.
Folder names with Unicode characters are not being restored proper to PST
DM2 Web Server related registry key may get overwritten with the Commserv name when the CommServe host name change operation happens.
Editing DDR properties for upgraded agents shows "Received error that the File System Data Agent needs to be installed", but the agent is converted to CDR.
Push-install may fail with the mismatch of DVD and winPackages.xml in Base folder.
Push install for Pre-configured clients is successful but changes the clientname of client to HostName.
Simpana user with Agent Management capability was not able to de-configure associated client.
Default behavior to sync up updates in remote caches has been changed to exactly match with CommServe Cache.Current behavior to retain additional updates in remote cache that are not in CommServe is now available with registry key option. Additional Instructions True sync up of remote cache can be disabled by creating registry key "nDisableTrueSyncUp" at below location and set the value to > 0
HKLM\SOFTWARE\CommVaultSystems\Galaxy\InstanceNNN\UpdatesFlags
Name change support for Commnet (QNet) related entries in the registry and database.
Name change support for SRM related entries in the registry and odbc name.
Changing the subclient's Deduplication signature from Media Agent to client or vice versa is not reported correctly in Audit trail report
Selecting "master" group causes perpetual "loading data..." state in "Security" tab from GUI.
E-mail sent from Send Log Files operation will list the recipients multiple times.
Push install by a user with only Install capability fails.
Backup Job Summary Report may not display jobs for some clients though there are some jobs present that satisfy the selected criteria. Additional Instructions None
Scheduled Backup Job Summary Report may fail when Oracle iDA jobs with extended retention are included.
In backup job summary report some jobs may be listed multiple times. Additional Instructions None
Incorrect data written size may be displayed in Job Summary report for Backups after the aux copy job is run.
Job Summary Report for SRM jobs shows 'No Data was found for the selected criteria' though there are some jobs matching with the criteria selected.
In Backup Job Summary report, for each VM, columns Size of Application, Data Written, Data Size Change, Data Transferred on Network, Transfer Time, Throughput, Protected objects, Failed folders, Failed objects show the data related to entire job now to each specific VM.
Restore Job Summary report job goes into pending state with the reason 'Loss of control process scheduleReport.exe' when the Failed/Successful objects selected and XML is chosen as output format.
In Backup Job Summary report, Data Written sizes in Summary table do not match with the corresponding aggregations of Data Written sizes in Detail table.
Job Summary report for Backup jobs for virtual server agent is showing entries with empty client name.
Job Summary Report does not display jobs that completed within configured time range if the start or end time is outside the selected time range.
Job Summary report may include all Virtual Server Agent jobs in the selected time period even though Virtual Server Agent or client is not selected.
Job Summary report may not include Virtual Server Agent jobs even though there are jobs run.
Enables user to select multiple date/time formats for reports.
VMs backed-up by the Virtual Server job will be listed in a spanning row rather than appear as a separate row.
Enhancement for including license tracking summary in License Summary Report.
For NAS NDMP backup jobs though there is no compression/deduplication applied on client side, Network transferred size shown is less than Application size.
Send log files command line utility fails to collect client logs with the error "The input client [] can't be found in the DB, skip.. <>" when net_hostname of client used with -vm switch.
SendLogFiles operation may not extract files when database is included and larger than 2GB.
Fix for EvMgrs crash during Alert notification process when [Save To Disk] option selected in Alert Wizard but no [Location] provided.
Enhancements for Virtual Machine Life Cycle Management
Fix for VMware snap restore when the disk contains an odd number of sectors.
No ability to centrally control FW and OSC config refresh interval
Monitor tool is not showing full size until we register and first backup starts.
Monitor tool is showing "No connection to server" until you close and open after first backup.
Additional Instructions Use OscRefreshIntervalSec and FwPullIntervalSec global parameters to control how often clients pull their FW or automatic schedule configuration from the CS.
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect.
Support for Hyper-V backup for online VMs with Netapp engine.
VMware Snapbackup support for VM's across multiple Datastores.
VMware Snapbackup support for vSphere5.
Tape movement job may fail to get snaps from mirror copy if there is any un-copied jobs on it.
Enable HDS ShadowImage differential resynch for HDS SnapProtect. Additional Instructions To enable the fix in this update, create the following DWORD value under the EventManager section of the Client registry: CVHDS_USE_DELETED_SHADOWIMAGE and set the value to 1.
Unmount is reported as failed from HDS Snap Engine even if it is successful. Additional Instructions Stop the services before applying this update
Exchange Snap backup job fails when same size of the source luns used across the multiple DAG nodes for HDS arrays.
Added support for HDvM 7.0 with HDS VSP Array.
Added support for HDS AMS2000 Copy-on-Write Snapshots.
Add support for HDS AMS COW (old model)
COW based Snapshot support for HDS enterprise Arrays
HDS VSP array support
Dynamic Provision volumes support for COW snapshot / ShadowImage
Selective copies may select jobs in a time period that do not fit the selection criteria. Additional Instructions This update will only prevent erroneous selection going forward - those jobs that already got selected erroneously for aux-copy should be manually marked 'Do Not Copy'
ImportCommServDB utility. Replacement of the ImportCommServDB utility that existed as part of CommNet (QNet) up to release 8.0. Reincarnation in 10.0 and backport to 9.0
Email alerts missing newlines in body and attachment (protected objects) since 9.0 upgrade. Additional Instructions This appears to happen only for emails that contain attached files.
Adding a filesystem subclient via qmodify schedulepolicy may remove some of the file system associations from the schedule policy. Also we are unable to addition/removal of a clientgroup from a schedule policy.
NetBackup DR jobs imported as Administrative jobs are not associated to media properly.
Additional Instructions Install this update along with update 30885.
EDC discovery job might fail while discovering TSM data.
Fix to handle external data collector merging libraries with multiple drive types.
Support for multi streamed jobs during Fast pass discovery.
Discovery job produces the following errors in FDCMgr.log file
Problem Declaring/Preparing/Opening cursor for Cursor IsAppTypeInstalledCS (Batch 1)
[DBErr] SqlState: 42000 NativeError: 313 Line/Row: 2/1
[DBErr] Message: [Microsoft][ODBC SQL Server Driver][SQL Server]An insufficient number of arguments were supplied for the procedure or function dbo.IsAppTypeInstalled.
Automatic schedules may start after being disabled.
Automatic schedules may start even when scheduler activity is disabled
Fixes issues with fastpass Networker discovery failures while collecting large amount of data.
Schedule may disappear from GUI and failed to do job submission.
During the VSA back up-> i.e. Discovery of VM Clients jobs, Connection from the client to CommServe fails and therefore the Pseudo clients are not created. Hence the Job Summary Report with option “Include Protected VM’s” are not displayed.
Promoting a synchronous copy to Primary may hang or cause all copies to not show in the storage policy view. This can occur when there are jobs yet to be copied to the synchronous copy to be promoted.
Add Snap Protect support for Equallogic having a seperate interface for management and data.
Additional Instructions If a dedicated management network interface is configured on Equallogic array, enter the management IP address in "Name" field when adding the array in array management.
Otherwise this field will be left blank.
The control host field will be used for Data interface as it is used today.
* SnapProtect unmount for Equallogic in an MPIO configuration causes an iSCSI disconnect error to be entered in the Equallogic logs.
* Crash in EQL snap engine when dealing with longer vmware device name lists.
Restores from Equalogic Clone based Snap backups for VMware may fail during mount operation.
In an EQL MPIO setup, logging out from iSCSI administrator fails due to device in use error.
Enhancement for ScanSCSITool command line tool to configure the Static Shared Magnetic Library.
Enhancement to allow configure/deconfigure operations on multiple MediaAgents for a given shared device of a Shared Static Library in Library and Drive Config Tool.
Fixes for File Copy method. Additional Instructions none
Increase the timeout value for data transfer completion for HDS cloud libraries.
Fixes to Support DDB Backups with File System iDA and Original File Copy method.
Library or Media Agent deconfiguration may fail with error "Failure during delete operation ..." if it was associated to a storage policy copy that has Media Refresh feature enabled.
Unable to change the local index cache path on any Media Agent if a DR job is running.
Restore/Auxiliary Copy/Data Verification Jobs may fail in certain cases when reading from Hardware Encrypted tapes written by clustered Media Agents and/or by NAS AuxCopy operation.
Jobs going to a DeDup policy may incorrectly go to waiting with JPR: "Object Level Deduplication license for MediaAgent has expired."
Library or Media Agent deconfiguration may fail with error "Failure during delete operation ..." if it was associated to a storage policy copy that has Media Refresh feature enabled.
Unable to change the local index cache path on any Media Agent if a DR job is running.
Restore/Auxiliary Copy/Data Verification Jobs may fail in certain cases when reading from Hardware Encrypted tapes written by clustered Media Agents and/or by NAS AuxCopy operation.
Jobs going to a DeDup policy may incorrectly go to waiting with JPR: "Object Level Deduplication license for MediaAgent has expired."
CommServe, File System iDataAgent for Windows, Web Server
Description
The following problems are fixed in this update.
Laptop Webconsole: When doing an out of place restore from web console, the first level of the folder is getting stripped and only the contents inside it are getting restored.
Searching with SMTP address in Email address field of advance search dialog does not yield all the expected results.
Skip invalid archive files while submitting for restore
Show restore status of items accurately
Fix for timeout issue during report generation for CI jobs
Searches do not return accurate results when criteria is specified in the discovery tab
Added new method to get GUIDs for the members of a group
CommCell Console, Outlook Add-In Client, CommNetBrowser, Web Server
Description
The following problems are fixed in this update.
The commcell console may freeze when selecting a computer in reports when running the console on Mac OSX 64 bit machine
Fixes for File Copy method. Additional Instructions none
Enable Deduplication and Data Storage Policy Tabs for Oracle onDemand Subclient.
Scheduler changes from AM to PM in Japanese GUI
In the Media-in-library view of a tape library, the "Last Write Time" column is sorted as text instead of by date.
Incorrect date sort on "Data on Media" dialog for tapes and mountpaths.
Sorting of drives by 'Drive No.' column in the Master DrivePool view of a tape library incorrectly sorts by text.
On the storage policy configuration wizard, unable to view the full name of MediaAgents in the drop-down list when selecting the Dedup store location.
Not able to delete Primary Snap Copy even if it is not associated with a DFM server.
'Export Media' dialog does not expand the media list vertically when screen is resized.
Enhancement to run DDB backup via File System iDA.
When creating a new subclient, when we are prompted to select a schedule policy it seems that the order of the schedule polices to select from changes each time.
Added/Changed Version String in GUI title and status bar.
cvwebrecall failing with error "Recover failed with error:Cannot connect to EvMgrC" Additional Instructions The following key should be added to the web.config's appSettings tag:
ServerName should be the server name of CAS server that behind the NLB server.
NAS iDA dedup rate is not good when using compression with dedup.
Restore from NetApp NDMP job appears to hang. Problem occurs when the file server requests a read from a past offset.
Content Indexing jobs for multiple archive files will sometimes go to pending with error "Unable to file header for next file".
AuxCopy from a NAS attached tape drive to a MediaAgent resource using software encryption fails with error "The remote end has closed network connection unexpectedly".
Sybase database discovery hangs for instance with many databases.
Sybase backup user needs SA privileges.
DB2/Oracle redirected restores fails on 32bit CommServe
Oracle 11g database backup fails after running cross check as part of data aging.
Add support for Sybase 15.5. Additional Instructions For Sybase 15.5 only on Unix, after installing this update, Syb_Install.sh needs to be run before attempting any Sybase backup or restore on that dataabse
Sybase instance creation fails for Sybase 15.5 with error being reported as unsupported version
Auxiliary Copy may not run using all available streams when reading from shared disk library due to dangling reservations.
Space on disk library may not be freed up due to dangling reservations.
DeDup properties may not show the active store paths if Media Agent was recently re-installed.
Deconfiguring Media Agent from the GUI may fail if it was used for hosting a DeDup DB.
Jobs going to a DeDup policy may incorrectlly go to waiting with JPR: "Object Level Deduplication license for MediaAgent has expired."
Enhancements for Backup using File System iDA.
Fixes for DDB backups using File Copy method. Additional Instructions none
Fixes for File Copy method.
Fixes for File Copy method. Additional Instructions none
MediaManager service may go down unexpectedly during DDR and HP Unix Snap Backups.
Prevent the storage policy being lost when a client is re-registered.
While saving the response file for 1-touch recovery, an user is prompted for username and password though we are logged into the commcell console. Now instead of getting the credentials from user we use a default user populated in the xml file with restore permissions.
Fixes to Support DDB Backups with File System iDA and Original File Copy method.
Currently the temporary cache location used on remote client during upgrade or installation of additional packages is the parent of directory specified under 'Store updates locally' on commcell Gui. User can override the location by making this directory not a sub folder of install folder.
No change in the behavior of updates. Temporary cache used for updates will still be same as the one specified on Gui.
Push install job may go to pending due to software cache locking even though sync is not required for software cache
Install updates using remote cache is not working as expected if we perform delete update cache operation on CS.
CVD logs are filling up fast with virtual server agent installed.
Synchronization of Remote Software Cache is not removing obsolete updates when the cache is changed manually.
Commit cache is failing if there is an install\download job is running for a different remote cache.
Baseline of the client is displayed as up-to-date if the client is installed with higher SP than the cache instead of ahead of cache.
- DistributeUpdates is crashing in the DB Layer
- Download Software should not be allowed while remote cache sync is in progress
- Do not delete Service Pack entries in patchINI table during remote cache syncup. This would fix probable database deadlocks on patchINI table
ServicePack installation is failing with low space on the client.
Correct Job delay reason should be shown if push-updates job for Commserve fails due to cache locking
Remove lock on CommServe or remote cache if the job that created the lock is not running any more.
Added new API to get the remote cache info on a client computer.
Database troubleshooting fix - If a database query is creating a lot of locks which locks out other queries, the query which looks for such locks may take a significant amount of time to run causing other issues.
Active lock detection job created using Dbmaintenace tool may fail to run.
Prune lock detection tables.
DBMaintenance for SRM Database fails with error "failed to insert the table list into the temp table" Additional Instructions None
Additional updates (loose updates) that are tagged as being part of a service pack are not sent to a remote client during updates installation.
- Updates present in cache may not get sent to client during push-update job.
- Sync up of remote cache can fail due to DB errors seen in distributesoftware.log
In some cases CommNet Data Protection summary report shows incorrect information on data aging status [enabled or disabled) for some storage policy copies.
CommNet "Data Protection" "Client Summary" report with option "Exclude those without schedules" selected, comes back that "No Clients meet the selected criteria".
* For SnapProtect NAS IDA, NDMP Copy restores from secondary copies were failing in certain cases.
* Backup to copy from secondary SnapVault copies were not correctly indexing the data.
* Backups to tape were failing if NDMP host name is not the same as NAS client name.
NAS iDA snap protect backup of a subclient with content of multiple qtrees on the same volume may take a long time.
NAS iDA backups with the SRM feature enabled will sometimes fail with and error indicating loss of control process. Error will occurr when there are file system names on the file server which contain spaces.
Incremental backups of NAS IDA get converted to Full when intermediate index cache is enabled.
NAS iDA backups will remain in a running rather than going to pending if there is a failure connecting back to the CommServer before any backup operations are started.
For NetApp NAS Snap Protect backups deleted files are not shown as deleted when browsing backup data.
Restore from multiple archive files tries to restore files from all archive files.
NAS iDA incremental and differential backups sometimes kick off an index restore when it is not necessary. Issue occurs when the index is greater than 2GB.
Snap Protect Restore Enhancements when retaining a number of jobs.
Image Level iDataAgent, CommServe, SAP for MaxDB, ProxyHost iDataAgent, Continuous Data Replicator, Web Server, Oracle iDataAgent, SAP for Oracle, File System iDataAgent for Windows, Documentum
Description
The following problems are fixed in this update.
Documentum Incremental backup goes to pending in prebackup phase.
SAP Oracle RMAN Util interface intermittent crashes for few failure scenarios
Oracle Table browse does not list partitioned tables.
No ability to centrally control FW and OSC config refresh interval
Monitor tool is not showing full size until we register and first backup starts.
Monitor tool is showing "No connection to server" until you close and open after first backup.
Additional Instructions Use OscRefreshIntervalSec and FwPullIntervalSec global parameters to control how often clients pull their FW or automatic schedule configuration from the CS.
Default Library and Drive Pool and Scratch Pool fields in SnapProtectImport created Storage Policies are N/A if a Tape Library is used.
Provision Policy on Primary node should be preserved in new Dataset.
Separate schedules to be created in case of Datasets having members from different filers
Provision Policy on Secondary nodes should either get duplicated with SnapProtect(case insensitive) prefix if not already there, or Default Provision Policy should be attached (create if required) if none is already there.
Show Deleted Items check box for NetApp is not set the same for a browse from the backupset and a browse from the subclient – the backupset browse request correctly has this option not checked for NetApp, but the subclient browse has it checked. So we want to set the subclient browse to behave the same way as the backupset.
"NetApp Snap management (196)" users need capability to run regular backups (Non-Snap). This is not possible right now because, the SnapProtect checkbox while creating and editing subclients is checked and disabled.
Exchange DB restore option shows "Please select a destination computer" if advance is not visited.
Virtual Server Backup Copy job or restore job may fail after changing the ESX server information on the snap protect subclient tab. It will point to old ESX server name.
Enhancement to retain number of job for Snap Copies
Enhancement to not create primary Snap copies by default during Storage Policy creation.
Skip uncompleted capture dump copy from Podcell to GRC.
Pullfiles receiving wrong response while running GRC-Import via Intermediary Media Agent.
GRC-Import should not force overwrite Operation Window, Schedules, Activity Control, Holidays.
After import of new jobs to primary copy they are not getting marked as 'to be copied' jobs in the synchronous auxiliary copies
Image Multistream option may not be visible for windows Image level IDA
Enhancements for DDB Backup using File System iDA.
DDB path change popup should clearly say about the icl_label.txt file to be copied to the new location
Restore may fail as OML verifications after a mount may fail in very specific scenario.
This is a new tool for importing configuration/data from NetApp DataFabric Manager to CommServe
Adding support via new tool for importing configuration/data from NetApp DataFabric Manager to CommServe. Additional Instructions This is a new tool for importing configuration/data from NetApp DataFabric Manager to CommServe
Snap protect import tool fails
to import the last external relationship
to import PMV external relationships with multiple qtrees
Job details screen may not show correct backup size for FS agent's backup job when there are multiple restarts for the job. Additional Instructions For a subclient (which has big size contents), the backup size will be approximated to the closest next chunk boundary and it may show marginally more data size as compared to the actual data size.
Laptop Jobs remain in "queued" state even after the completion of operation window.
Disaster Recovery Backup Alert is sent for killed install software and install update jobs
Adding extra logging to jobmanager service for troubleshooting.
Aux copy job summary report may not show destination media for some jobs.
Aux copy media may not be marked full after successful operation.
Enhancement to throttle the number of simultaneously running Install update jobs.
Install update job gets queued if there is another install update job with conflicting clients is already running.
"Prune Records" phase of DDB Reconstruction job may either fail or stay in running state without any progress when one or more source mountpaths or MediaAgents are offline.
Skip uncompleted capture dump copy from Podcell to GRC.
Pullfiles receiving wrong response while running GRC-Import via Intermediary Media Agent.
Unable to restore commserve database after installing database upgrade package
Migration Options are not saved properly when switched between different property pages
JobManager may crash during service startup
Job registrations may fail with error "Wrong response type received for process registration from jobmanager".
Oracle schedules may be missing Backed up option after upgrade Additional Instructions Note: Make sure when installing the updates 37735 and 37739, please don't start CS services in between. CS services need to be started only after installing both the updates.
Enhancements for DDB Backup using File System iDA.
DeDup Reconstruction job may stay running in Prune Records phase for a long time even though a failure has occurred on the MediaAgent.
Release Reservation operation from the GUI may cause Event Manager service to crash on the CommServe.
Performance enhancement on the CommServer for pruning of data in disk library.
Prunable data from a migrated deduplication-enabled storage policy may not be removed from disk.
DDB recovery job may stay running in Prune records phase without any progress if one of the MediaAgents for the disk library is offline.
DDB Recovery job may go pending in "Prune Records" phase if there is a large number of records to play back on the DeDuplication DB.
DDB Recovery job does not have the correct progress in the "Prune Records" phase.
"Prune Records" phase of DDB Reconstruction job may either fail or stay in running state without any progress when one or more source mountpaths or MediaAgents are offline.
File level restore job hangs when restoring large data set. Additional Instructions This update has to be installed in the computer where the index cache is located (Media Agent)
CVD memory usagae spikes during sharepoint archiver reacalls
Fix Evmgrs crash when trying to schedule multiple jobs.
Fix Evmgrs crash when trying to schedule multiple jobs.
Fixes crash in DM2SPDocRestore.exe when running content indexing on sharepoint 2010
Silo Backups may fail with error message "File system scan failed - there is nothing to back up. A possible cause is that none of the subclient contents exist."
Windows and Laptop iDataAgent honors exceptions to inclusions in filters for files, but not folders.
Windows file system backups using wildcard characters as part of the content may fail to backup files if system state backup is also selected.
Snap movement to tape from proxy fails to backup some files
Unable to recall files from Celerra Archiver in certain cases.
DMNAS filer recalls fails if the filer cannot set offline attributes.
Recalls may fail if sparse attribute is not set on the stub.
Rearchiving happens for NAS Stubs without offline attributes.
Offline attribute is not removed for files recalled from FPolicy share when GXHSM_NAS_REMOVESPARSE_ON_RECALL registry key is set.
Support for using EBS provider as and underlying layer for SharePoint Archiver agent
Multiple jobs may fail on a busy Commserver with error "Failed to get a response in the timeout period from CVD for process registration" and "Failed to get a response in the timeout period from Communications service for process registration"
Fixes the 4GB size limit for the Source Side Dedup DB size and thereby increases local cache lookups.
Disable auto launch of laptop monitor.
Show backup monitor tool icon on the menu bar on top right corner on mac instead of on the dock.
Backup monitor tool start-up changes. Append username to the mutex file used for checking if multiple instances are running.
Laptop enhancements for Ubuntu/Mac.
Ignores adding users as laptop owner when it encounters invalid user profiles.
Fixes the 4GB size limit for the Source Side Dedup DB size and thereby increases local cache lookups.
Laptop Backup Monitor help icon point to a custom documentation link provided by the customer.
Enhancement to allow Source Side Dedup Database(SSDB) to grow upto 128 GB.
Repeated backups in quick succession may fail if client Side dedup is enabled with SSDB.
Oracle schedules may be missing Backed up option after upgrade Additional Instructions Note: Make sure when installing the updates 37735 and 37739, please don't start CS services in between. CS services need to be started only after installing both the updates.
Exchange Mailbox iDataAgent 2000, OWAProxyEnabler, Exchange Mailbox iDataAgent 2003, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, Data Archiver Agent for Exchange 2003, DataArchiver Agent for Exchange, PrimaryCIForExchange
Description
The following problems are fixed in this update.
OWA Recalls may fail if mailbox has non standard name for Top of Information Store
ExTiMBDMArchiving.exe crashes in stub phase of archiver job when some specific message presented.
Stub recall from embedded link may fail with error: Auto discover failed. Additional Instructions The following key should be added to the web.config's appSettings tag:
<add key="CV:AutoDiscoverUrl" value="https://servername/autodiscover/autodiscover.xml" />
Archiving Jobs may fail during stubbing phase.
Recalls from a delegate mailbox for Exchange 2010 Outlook Web Access may fail
Exchange Mailbox Archiver stubbing process may crash while processing very long paths, though the job may still complete successfully.
Enhancement to provide limited support for Public Folder Archiver recalls from Outlook Web Access 2010
"cvowa:deletestub" web.config option is not working as expected. Additional Instructions For Public Folder Archiver recalls from OWA there are some limitations
1) Auto Open after recall is not supported
2) If the public folder database is hosted by a different version of Exchange than the CAS server where OWA was launched, the recall will not be supported.
Support for caching recalls from Outlook and OWA for Exchange 2007 and Exchange 2010
PST recalling was not working when Manage PST stub was not chosen in archive.
Additional Instructions NONE
Outlook Add-In may not load properly when using mailto: function from browser
Outlook 2010 auto open does not work properly when in cached mode.
Offline Archiving Hourly schedule changes. Additional Instructions A new key is being added to schedule Offline Archive operations every nn hours.
Name: AutoLMJobHourlyFreq
Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\Galaxy.Ex2KMBDM.CVEAAddin
Type: DWORD
Value: number of hours between offline archive run attempts.
Details: This key is not created by default. If the key is created then it will override the behavior of registry keys AutoLMJobFreq and AutoLMJobRunTime. It is recommended to use registry key bEnableOfflineArchiveAtStartup in conjunction with this new registry key as the increments for AutoLMJobHourlyFreq will only begin nn hours after Outlook is opened.
Note, there may be some variance in exactly when the offline archive job is kicked off when this registry key is enabled as it may be delayed up to one additional hour past the configured interval.
Emails which are manually marked for archival using Outlook Add-In option 'add selected message to archive list' do not display as stubs after the archive job completes until after Outlook is restarted.
Additional Instructions NONE
The find and recover in outlook fails for a non-admin user on Windows 7 OS with "User SID was not found while looking for profile info".
Enhancement to provide a hidden cache for recalled messages.
ROMS Agent may hang when there are connection issues between server and client.
Enhanced error reporting and added more diagnostic information for troubleshooting.
ROMS queries may not execute when a query times out.
ROMS application attempts to write log file into an invalid directory.
Standardize ROMS diagnostic logging with other Simpana products. Additional Instructions If you want to enable verbose logging on your system, all the following just below the ROMSAgent_ROMSService_ROMSService setting:
True
To turn it off again, change the value to False
Clients with RegisterMe have domain missing in client owner name.
Unable to save Dedup signature generation (Or single instance item) setting specified from qcreate subclient command for Linux FS Ida
System state backup may crash.
After upgrading to 9.0, schedule policy count may have increased on schedule policies for specific IDAs with only client group association
After upgrading to SP3 the EvMgrs.exe process is crashing whenever backup job for oracle is run from Command Line.
Evmgrc may crash during stub recall if request is cancelled.
In the License Summary Report, when Capacity Usage option is selected, values are now always shown in TB. Additional Instructions This requirement is specific to capacity based licensing information.
Virtual Server Backup Copy job or restore job may fail after changing the ESX server information on the snap protect subclient tab. It will point to old ESX server name.
Enhancement to add a V-Sphere plugin for VSA Restores
Commcell configuration report: Text output is missing information for subclient content, retention information and associate schedules even though HTML reports shows them.
Restore from Vault or Mirror copy may fail under certain conditions
Show Locale Name in the GUI Audit report
Support Registration of a client using an AD user from Register Me tool.
Support installation of a client with AD user Credentials.
Media agent name is shown blank in Backup Job Summary report.
Default behavior during clone operation with IBM SVC is modified to wait for the full copy operation to complete before the snap backup job is marked as succesful.
Support for optional Smart clone operation. Additional Instructions To enable Smart clone operation, follow these steps->From the Control Panel > MediaManagement > Service Configuration, change parameter "Perform Smart Clone operation by SnapProtect engine" from 0 to 1.
Error message says data received on the media agent from the client is corrupt when there is loss of network connectivity from client to Media Agent
Enhancement to show owner information in Job Summary Report for DLO Clients
Enhance webconsole to display more job details in job history.
Server support for viewing, restoring, and downloading different versions of a file via Laptop Backups
CommCell Console, Outlook Add-In Client, Web Server
Description
The following problems are fixed in this update.
The VM Lifecycle Policy GUI changes to introduce Advanced options button and moved certain properties.
Virtual Server Backup Copy job or restore job may fail after changing the ESX server information on the snap protect subclient tab. It will point to old ESX server name.
Pre/Post backup process for DR backup fails with error " Remote execute request returned error: [Logon failure: unknown user name or bad password"
Outlook Add-In Find and Recover may hang while trying to start an index restore
Enhance webconsole to display more job details in job history.
Server support for viewing, restoring, and downloading different versions of a file via Laptop Backups
Exchange Snap Mining operations involving incremental snapshot data fail to retrieve associated metadata.
Sharepoint snap mining failed to connect sharepoint database.
Fast pass discovery enhancements to support Windows and Unix file formats collected using pre-deployment survey method.
Fix for fast pass discovery job failure due to incorrect server name during storage policy creation.
Fix for fast pass discovery jobs failing while merging jobs with same start time.
Fixes for Fast pass TSM:
Unix backups are failing after push install, since the contents for default subclients are specified as "Default_Contents". This is being changed to / to let the backups run.
Ambiguity in hourly schedules end time is causing task manager to miss first run. Schedule end time will be set to 86400 to avoid this
EDC discovery failure during database merge due to duplicate hostnames in client list.
Fix for Fast pass discovered TSM job size >2GB was not being handled properly
Enhancement to support process specific profile creation for Public Folder backups.
Additional Instructions Set registry key "MSExchangePFAgent\CreateProcessSpecificProfile" (DWORD) to a non-zero value to create per process profile for public folder jobs.
Fast pass discovery support for EMC Networker
Exchange mailbox restores fail when the smtp address is changed for the mailbox after the backup has happened.
Enhancement to support process specific profile creation and profile re-creation for Public Folder backup and archiver.
Additional Instructions Set registry key "MSExchangePFAgent\CreateProcessSpecificProfile" (DWORD) to a non-zero value to create per process profile for public folder jobs.
Exchange Mailbox restore process may crash while performing an Out of Place restore.
VSA Snap Mining for Mailbox fails with "Failed to initialize External data connector".
Default behavior during clone operation with IBM SVC is modified to wait for the full copy operation to complete before the snap backup job is marked as succesful.
Support for optional Smart clone operation. Additional Instructions To enable Smart clone operation, follow these steps->From the Control Panel > MediaManagement > Service Configuration, change parameter "Perform Smart Clone operation by SnapProtect engine" from 0 to 1.
Support for automounted paths for index cache directory. Additional Instructions Registry key 'EnableAutoMount' under 'EventManager' on unix should mount the path by opening the directory first. The following stat calls will return correct sizes for the folder.
Lotus notes email restores do not update the status correctly
Metadata collection may fail for Linux Ext3 volumes in Xen backup.
Running SRM jobs can crash Media mount manager on Linux media agent
Under certain index cache server configuration ArchiveIndex fails to upload full index to index cache server leading to failure during next incremental jobs.
Fix for updateindex crash under certain disk full conditions.
VM Live Browse crashes CVD on MA when Virtual server Agent is not installed.
HyperV restores on a non exisiting volume may crash.
cvd process memory on the MediaAgent may grow when unbuffered I/O option on the Mountpath is turned on.
Unbuffered I/O is disabled by default internally for write operations.
Added extra logging for unbuffered I/O operations to troubleshoot any failures.
Jobs running to a Dedup Storage Policy may fail due to DDB timeout errors if the user credentials to any of the network mountpaths of the disk libraries are wrong.
SharePoint backup may fail in the case of hard failure during CreateIndex
Index cache from the killed jobs could be in cache for an extended time
Find feature for image level ida like VSiDA.
VSA Snap Protect may fail to take snap
Hyper-V snaps may get deleted during snapcatalog phase or moving to tape phase.
EvMgrC service may crash while discovering Xen VMs.
Media Mount Manager service on MediaAgent may terminate abnormally during VSA snap backup
Support for using SYMAPI package on the client instead of SYMCLI for Snap Backups using Symmetrix array and to invoke the correct version of SYMAPI library.
Enhancements for Virtual Machine Life Cycle Management
Fix for VMware snap restore when the disk contains an odd number of sectors.
Extra (`) character is suffixed after the service pack string in the updates status information window of a client's version information. Additional Instructions Must run Commit Cache operation to synchronize the database after installing this update
Passive CommServ node shows that it requires an update that is obsolete and also not present in CommServe cache.
Updates which are killed and included in the previous service pack are shown as AheadOfCache after installing the current service pack.
Commit cache is failing if there is an install\download job is running for a different remote cache.
Baseline of the client is displayed as up-to-date if the client is installed with higher SP than the cache instead of ahead of cache.
SharePoint iDataAgent, File System iDataAgent for Windows
Description
The following problems are fixed in this update.
SharePoint Database support of individual sites introduced by 9.0 Update 31580 attempts to recover child site prior to parent site.
SharePoint Database restore of individual sites with url path levels similar to original will preserve the object identity (subsite GUIDs) using DWORD registry key bSiteImportRetainObjectIdentity set to 1 under HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\MSSharepointDocAgent.
SharePoint Database Browse Data from On-Demand Backup doesn't show backed up sites. Additional Instructions Backup job should be completed after installing this update and prior to recovery operation. Note:
SharePoint Database support of individual sites introduced by 9.0 Update 31580 is only for SharePoint 2007 and 2010 versions.
SharePoint Database operations now stage data to the job results folder specified in CommCell Console. Additional Instructions The Job Results path must be less than 248 characters.
SharePoint DataBase cannot discover any content when Windows SharePoint Services Search index is corrupted.
Adds Dedup support for Sharepoint Database backups.
SharePoint Database iDA backup fails for Service Application when the application name contains some foreign characters
Machine becomes unresponsive during login/logoff with Image iDA installed. Additional Instructions Size (in KB) that when the bitmap file size is at or below a single write will be used to write the entire bitmap file. When the bitmap file is larger than this size, the 3 individual blocks where a change occurs will be written instead.
Specifies the default size for new volumes:
DefaultPersistSingleWriteSize
Specifies per-Volume size:
PersistSingleWriteSize
DeDuplication enabled storage policy copies to have 'Failover to new store' enabled by default.
Can't select the "Disable RMAN Crosscheck" checkbox in the details tab of the DB instance properties (for Oracle RAC)
Prevent Automatic move operation of Deduplication DB from Commcell Console and provide proper steps for the manual move to avoid corruption.
Show the Incremental Storage Policy option in the Storage policy properties, even if the NetApp Snap Management license is available on the Commserver.
Commcell Import/Export - When new entities are migrated from a source commcell that are not yet mapped to entities in the destination (for example when data from a new mountpath is migrated), an already scheduled import job may go to pending due to missing answers with no way to specify mappings for the new entities. This update allows answering those questions in the control panel so that the job can be resumed.
Unable to perform activity controls on NAS SubClient.
Unable to open property sheet of a DeDuplication enabled storage policy copy when the free space of the associated library is more than 2.1 PB.
Unable to set Network Throttle percentage below 32%
Virtual Center Plugin from vcenter gui.
Oracle Duplicate and Cross machine restores between Redhat and Suse linux machines, the OS version of probable destination clients are being checked for compatibility rather than exact version match.
Fast pass discovery support for EMC Networker
Prevent Automatic move operation of Deduplication DB from Commcell Console and provide proper steps for
the manual move to avoid corruption.
Allow to set the Tape block size to 2048 KB on the Datapath.
CVMHSM driver causing OPLOCK issues. Massive delays accessing files while file archiver services are running on server. Additional Instructions This would be supported only with SMB1
CVMHSM driver causing OPLOCK issues.
Unable to recall the stub file when renamed from a UNC path.
Archiver recall fails with "Skipping retrieval as data is erased.". Additional Instructions To work around erroneous failure conditions due to this message, add the following registry key to bypass the erase check.
Name: nDMRSSKIPERASECHECK
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\EventManager
Type: DWORD
Value: 1 to skip the erase check. 0 to enable the erase check.
Warning! enabling this key may allow retrieval of messages which have actually been erased.
End-user ability to control job status by specifying error control rules.
Unable to recall files from Celerra Archiver in certain cases.
DMNAS filer recalls fails if the filer cannot set offline attributes.
Recalls may fail if sparse attribute is not set on the stub.
Rearchiving happens for NAS Stubs without offline attributes.
Offline attribute is not removed for files recalled from FPolicy share when GXHSM_NAS_REMOVESPARSE_ON_RECALL registry key is set.
Stub recalls adding actual file size in gxhsmcache location not stub size causing low space on customers volume Additional Instructions Archiver service is not able to copy stub file to cache correctly. Restubbing is not working due to this.
The SRM Storage Group and Public Stores History report may produce an error saying
"[DBErr] SqlState: 23000 NativeError: 2627 Line/Row: 60/1
[DBErr] Message: [Microsoft][ODBC SQL Server Driver][SQL Server]Violation of PRIMARY KEY constraint 'PK__#5C4A445__74591B3E5E328CC8'. Cannot insert duplicate key in object 'dbo.@historyTbl''"
SRM File level detail table data is not deleted for the jobs which are eligible for data aging. Additional Instructions For SRM Enabled Virtual Server IDA, To prune the File level data of the virtual machines, we need to set data aging retention period for Windows and Unix instead of for virtual server platform.
Laptop backup subclient property sheet always lists the SubClient Policies filters through the WebGUI, regardless of how the "Use SCP Filters" checkbox is checked.
Fix webconsole UI to enable Restore button when user has restore capabilities
Restore progress may show incorrect information
Show all clients that are owned on the webconsole instead of only laptop clients.
Introduced new Content Indexing parameters that can be tweaked based on customer setups
Additional Instructions The following reg key with there respective values at location HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\CommVault Systems\Galaxy\\ContentIndexingServer have been introduced
TYPE:DWORD
_ActiveDocumentsLimitMB
Value:500
TYPE:DWORD
_BatchTimeOut
Value:60
TYPE:DWORD
_BatchSizeKB
Value:1000
TYPE:DWORD
_CallBackPollInterval
Value:1000
TYPE:DWORD
_DocumentTimeOutMin
Value:5
TYPE:DWORD
_MaxRetries
Value:0
TYPE:DWORD
_BatchDocCnt
Value:80
CVD service needs to be restarted for the regkey to take into effect
Subject of Download Software alert email may be incorrect
EvMgrC.exe memory utilization steadily grows until the services are recycled
qlogin may crash after an upgrade from 8.0 to 9.0
Unable to run Out of Band sync with WaitForDifferencingFile failed.
Utility to force sync-up commnet and commcell.
qcommands other than qlogin throw error "User not logged in" when run against a cs which is behind firewall.
qlogin intermittently crashes during login.
MediaManager crashes during SILO restore.
qcommand.log populated with insufficient info
qlogin fails with error "Failed to connect to QSDK server" in Firewall environment.
Sometimes CommNet synchronization is failing with following error: "Violation of PRIMARY KEY constraint 'CNHistoryJob_UpdateTemp_RegID_ID_PK'. Cannot insert duplicate key in object 'dbo.CNHistoryJob_UpdateTemp'."
Enhancement to support multi stream backup for Image level iDataagent on UNIX
Outlook Add-In Find and Recover may show inconsistent browse results
Prevent Automatic move operation of Deduplication DB from Commcell Console and provide proper steps for the manual move to avoid corruption.
Show the Incremental Storage Policy option in the Storage policy properties, even if the NetApp Snap Management license is available on the Commserver.
Job suspended by system show as suspended by user
Oracle RAC restore may fail with Job Pending Reason "Failed to retrieve drive pool information." when using multiple nodes.
Client and Server side changes to allow client process to set the reason for suspending a job.
"Data Archiver for Files - MS Windows" (FSDM license for Local File System instance) is not consumed when "Enable for Archiving" is selected on winFS properties.
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect
Enhancement to add support for ROMS license
Unable to release NDMP remote server license for cluster groups.
Provide GUI option to release UNIX NDMP remote server license.
SNMP Alerts are Disabled even when license is consumed
New license support:
-- Dell Snap Management license
-- Subscription Usage Based licenses
A connection to the database using a DSN and the ODBC SQLConnect may not work on Windows x64 systems using 32 bit binaries which may cause issues such as restores from the web search UI not succeeding - note: fix may need additional regkey set (see additional instructions)
Additional Instructions This update adds logging and the ability to Toggle between SqlConnect DSN mode and connection string mode (SQLDriverConnect) mode.
This fix by default does not change the behavior. However a registry key can alter it.
In the database section create a STRING value called "connStringOverride_" -in case the DB name is DM2, the string would be "ConnStringOverride_DM2"
This accepts 3 different values:
on
on:
off
on - this automatically constructs a connection string to connect to the database based on the values stored in the registry.
on: allows one to specify one's own connection string.
Example:
on:Driver={SQL Server};Server=ExampleServer\ExampleInstance;Database=DM2;UID=sa;PWD=passwordincleartext
off: same behavior as if update is not installed (use DSN and SQLConnect)
Allowing case sensitive content and filters for UNIX sub clients associated with sub client policies.
Commcell Import/Export - When new entities are migrated from a source commcell that are not yet mapped to entities in the destination (for example when data from a new mountpath is migrated), an already scheduled import job may go to pending due to missing answers with no way to specify mappings for the new entities. This update allows answering those questions in the control panel so that the job can be resumed.
Restore of SILOed data after CommCell import may fail to retrieve data from the SILO backup.
Update to have the Commcell Migration export template dump in the installation base to be used for cross version migration from 9.0 CommServ to 8.0 CommServ
Recovered pruned and deleted data fails in the merge phase with error "The INSERT statement conflicted with the FOREIGN KEY constraint "archChunkMapping_archChunkId_chunkCommCellId_FK""
Commcell Import/Export fixes:
Restore of migrated jobs belonging to a copy with encryption and de-duplication enabled may fail with error
"Description: Buffer is encrypted, but cipher has not been instantiated or has not been initialized with a key."
Size criteria set on secondary copy properties in source commcell isn't retained in the destination commcell after migration
CommCell migration of data associated with a deduplication store to the original CommCell in which the store was created might create a new store instead of associating the data with the existing store
Reports might not show correct information regarding the migrated deduplication stores
Commcell Import/Export - When new entities are migrated from a source commcell that are not yet mapped to entities in the destination (for example when data from a new mountpath is migrated), an already scheduled import job may go to pending due to missing answers with no way to specify mappings for the new entities. This update allows answering those questions in the control panel so that the job can be resumed.
SharePoint document backup may fail to backup a document if the author's user account has been deleted and the account's security ID cannot be retrieved.
SharePoint Document IDA restore restores current date and time instead of backed up value with setups having varied cultures.
SharePoint Document IDA backups wrongly update failed item/folder count, also with duplicate item entries on certain failures.
When SRM File Level Analytics is enabled, temporary files may be left behind in SimpanaBase\Temp folder after SRM jobs.
Additional Instructions Any temporary files existing prior to installation of Update must be manually deleted.
Enhancement to support wildcard content without special wildcard BackupSet.
DC scan fixes for Online CI, Turbo, FSDM and mount points.
On non-english operating systems backup may erroneously filter more data. Additional Instructions For customers that have run into this problem, it is strongly recommended to run a full backup after this update installed
Backup Monitor does not show any status while the job is running in the scan phase
OCS backups are failing.
1-Touch offline restore may crash in case of network failures.
Components which gets skipped during offline restore will be marked succeeded and then restored using onetchutl.exe after reboot
Snap movement to tape may crash
Out of place restored data comes back as hidden in some cases.
Large files with name FLRxxxxxx.out files generated in \Temp
The "Continuous Data Replicator" Job Summary Report does not include the Date and Time of Failed Items for a Replication Pair.
Additional Instructions Failed files from source and destination will not be shown for specified time range
Add support for the DFM Import tool for importing information from DFM.
After applying SP2, data browse can sometimes take long time to show results
Database dump files are included in the send log bundles sent via email, causing email to be failed to send due to large size of cab file.
Restores for Virtual machines may fail from Snap Protect jobs.
For VM Provisioning feature, Refresh data centers doesn't work Additional Instructions none
Allows restores of disks that have an odd number of sectors.
CVD hangs on windows 2003 OS after installation of SP2B
Enhancements for VM Provisioning.
Support for Hyper-V backup for online VMs with Netapp engine.
VMware Snapbackup support for VM's across multiple Datastores.
CommNet "Billing Association report" or "Charge Back report" may fail with the following error
"Problem Declaring/Preparing/Opening cursor for Cursor GetXMLFromQuery/BLClientReport.(Batch 1)
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression"
CommCell Console, Outlook Add-In Client, Web Server
Description
The following problems are fixed in this update.
Outlook Add-In Find and Recovery, browse hanging
System Owner Capabilities link in the Control Panel needs to be renamed to Client Owner Capabilities
For Automatic schedules, under Power Management, "Stop the task if battery mode begins" should be enabled only if the first option "Start only if the computer is running on A/C power" is selected.
Unable to submit job without setting "Skip Catalog Phase" to true.
Saved reports created in v8 will not run after upgrade to v9. These issues with running saved reports are seen only from Java Web and the Stand Alone Console from remote machine. The reports do work as expected while directly logged into the CS.
Documentum iDA default the page size option is set to 2147483647 in the New browse.
Unable to retain focus for selected MA/library in data path
Addin shows inconsistent results for Exchange Mailbox Archiver agent when the browse was done from backupset level.
Addin may show duplicate mailbox names with different capitalization
Library and drive report may incorrectly display no data for a disk library.
Disk Usage tab on disk library properties may show no information.
When the required media is outside of the library for a content indexing job, the job may go into a waiting state telling the user to check the streams tab - which may be empty and does not give any information as to why the job is waiting.
Size of valid data field on Disk library's mount path properties may show the wrong value.
Disk library properties may not show the actual values for Managed Disk Space thresholds and Number of Writers.
"Prune Records" phase for DDB Recovery job may fail with user impersonation errors.
Enhancement to auto assign laptop ownership based on user profiles created on laptop.
Fix for shared index cache going offline when MA added or removed to the shared cache.
Snapshots may be incorrectly shown as mounted in GUI wherein the mount has failed in library version check.
Media Manager service may crash on a CS where catalog server is configured on one of the Media Agents.
CVMountd may crash and Import from Podcell job fails to pull dump files from intermediary media agent.
"Prune Records" phase for DDB Recovery job may fail with user impersonation errors.
Improvements for DDB Reconstruction job performance.
Client applications may crash if connections through cvfwd fail.
Set default thresholds for minimum free space of DDB path to prevent corruption.
Enhancement to support Prefetch command from GUI for ACSLS libraries emulated by CentricStor
Incorrect job waiting reason shows for jobs running to a deduplication enabled storage policy when the DDB access path is offline.
Event for space free on Media Agent index cache shows the wrong threshold value.
Fix to change the DAG username and password once DAG client is created.
Additional Instructions qoperation execscript -sn updateDAGADCredential -si 'clientName' -si 'userName' -p2 'password'
CommCell Console, Outlook Add-In Client, CommNetBrowser, Web Server
Description
The following problems are fixed in this update.
Changing user name during SSO may log in the incorrect user
SRM Scheduled Report in PDF may be missing the legend.
SRM History Reports with trending have incomplete chart when saved to PDF.
When trying to change any of the client properties from GUI it was showing "invalid user" as error.
On Mac systems, when trying to select/deselect an agent during Schedule policy creation, an exception is thrown and user is not able to save the selection.
Database dump files are included in the send log bundles sent via email, causing email to be failed to send due to large size of cab file.
Option changes for installed and uninstalled SQL agents.
SAP Oracle Instance and Subclient creation support from command line.
Additional Instructions After installing this DB update 10917, Please run the below 2 Querys. One for Instance Creation and the other for Subclient creation.
1. qoperation execscript -sn CreateSAPOracleInstance.sql -si <Client_Name> -si <Instance_name> -si <ORACLE_HOME> -si <SAPData_HOME> -si <Default_Storage_Policy> -si <Log_Storage_Policy> -si <Cmd_Storage_Policy> -si <Oracle_user> -p2 <Oracle_pwd> -si <Oracle_service> -si <SAPEXE> -si <host_user>
Examples for 1:
Client_Name: CommCell Client Name
Instance: SAP Oracle Instance <SID> name
ORACLE_HOME: Oracle Home DIR Path
SAPDATA_HOME: SAP DATA HOME Path
Default_Storage_Policy: Default Storage Policy for Default subclient that gets created along with the instance.
Log_Storage_Policy: Log Storage Policy at instance Level.
Cmd_Storage_Policy: CMD Storage Policy at Instance Level for CLI backups
Oracle_user: Oracle User [Ex: sys ]
Oracle_Pwd: Oracle user password [ Ex: Sys Password ]
Oracle_service: Oracle Service [ SID Name Ex: BWD ].
SAPEXE: SAPEXE path.
Host_User: SAP User ID [Ex: bwdadm / <SID>adm ]
2. qoperation execscript -sn QS_CreateSAPOracleSubclient.sql -si <Client_Name> -si <Instance_name> -si <Subclient_Storage_Policy> -si <Subclient_Name>
Examples for 2:
Client_Name: CommCell Client Name
Instance: SAP Oracle Instance <SID> name
SubClient_Storage_Policy: Default Storage Policy for Default subclient that gets created along with the instance.
Subclient Name: Name of the user defined subclient [any name]
ResourcePack, Exchange Mailbox iDataAgent 2003, Exchange Public Folder iDataAgent 2000, DataArchiver Agent for Exchange, Data Archiver Agent for Exchange 2003, PrimaryCIForExchange, Exchange Mailbox iDataAgent 2000, Continuous Data Replicator, OfflineMiningExDBEndUser, Exchange Public Folder iDataAgent 2003, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, File System iDataAgent for Windows, Exchange 2003 Database iDataAgent
Description
The following problems are fixed in this update.
Exchange archiver discovery crashes for storage group affinity, especially when new storage groups are introduced
When browsing backed up emails,"To" column is trailed with unreadable characters.
The Manual discover may not discover all the mailboxes.
The auto discover with DB affinity feature may not discover all the mailboxes.
EvMgrS.exe may crash on CS when we try to configure target mailbox for an Exchange Compliance archiver, if few of the mailbox users are invalid.
Exchange Public folder backups complete without errors and does not backup all items because of Permissions issue.
MB backup and archive does not give any indication of failure as result of inaccessible mailbox.
Profile created by Data Protection or Recovery operations fails to open store if mailbox name is ambiguous.
Additional Instructions With this update:
1. The public folders that could not be backed up/archived can be viewed from job events, failed items list and logs
2. The MB could not be backed up/archived can be viewed from job events, failed items list and logs
Exchange mailbox backup crashes on few emails when failure to fetch attachment properties is encountered Additional Instructions When these kinds of attachment failure happens, the corresponding messages will be failed to backup.
Compliance Archiver may prune stubs from mailboxes during a backfill operation
Application crash attempting to save mailbox or folder as PST files.
Certain messages with attachments are failing to restore as msg or pst files. It fails with the error
message : "An internal error occurred". This specially happens for messages with embedded attachments
Added Extra logging at higher log level
Streamed properties are not handled properly
CVD crash during log replay in snap mining operation
Exchbackup.exe crashes during backup occasionally.
Compliance archiver skips messages while processing
Restore of exchange mailbox crashes occassionally
Exchange mailbox archiver recall or recovery are failing with "Failed to read recipient properties"
JM support for new initiated from "INIT_FROM_TYPE_AUTOMATIC" for OSC initiated jobs.
Global param to enable/disable VM Provisioning plugin.
Enhancement to hold reservation between between phases even when there is post backup command. Additional Instructions After installing the patch the feature can be enabled or disabled by database key.
-- To enables the feature using the following qscript
qoperation execscript -sn SetKeyIntoGlobalParamTbl.sql -si HoldReservationDuringPostBkp -si y -si 1
--To disable the feature using the following qscript
qoperation execscript -sn SetKeyIntoGlobalParamTbl.sql -si HoldReservationDuringPostBkp -si n
JM laptop backup support to return data for Admin jobs whenever requested by client.
JobManager changes for Laptop2 for automatically resuming traditional jobs when laptop comes online.
CommNet Media Prediction report may incorrectly report larger number of tapes consumed than actual.
Jobs going to a deduplication enabled copy that was created in a previous release may occupy more disk space if the "Do Not Deduplicate against objects older than " option is turned off.
Enhance the Disk library properties dialog to show following charts
a. Used Vs Free Space Comparison
b. Data Written Vs Application Size Comparison
c. Space Consumed Vs Space Freed rate Comparison, Also space outage data based on the current rate of consumption
Enhance the Library and Drive report to show space savings information
Enhancement for Dell disk array configuration.
Library and drive report may incorrectly display no data for a disk library.
Disk Usage tab on disk library properties may show no information.
Disk Usage tab of library properties may show the wrong values for average daily consumption.
Pruning might not happen correctly on disk library with managed disk space option enabled and many mount paths resulting in Arithmetic overflow DB errors.
JobMgr Crashes when debugging turned on for Alerts through C:\DumpAlert. Additional Instructions This crash has been reported for multiple Server processes.
While installing through custom package, the installer should display proper and meaningful messages in case of unsuccessful install.
Express OEMs should not auto-select Sharepoint Data Archiver when selecting Sharepoint in Standard install mode.
Virtual Server iDA Volume Level Restore as Physical Volume fails.
Registry key MSSharepointDocAgent\bSiteExportEnabled not preserved during upgrade.
#1. SilentInstallProgress - Enhancement to show progress bar for silent install
#2. ReducedPackageFix - Support to use reduced package for software cache
When we select more than one media and run catalog job, and and if catalog of one of the media fails, the job status should be completed with errors but the status is seen as complete
Symptom : When we select more than one media and run catalog job , and if catalog of one of the media fails , it does not retry the catalog operation later
Fix : Added a registry key "nMaxCatalogRetryAttempts" under MediaAgent. Depending upon the value of this key it will retry the catalog of failed media.
Additional Instructions Create "nMaxCatalogRetryAttempts" under MediaAgent and set it's value to a number, that many times you want to retry the catalog of failed media
Deletion of Deduplication enabled storage policy/copy may leave dangling entries in CS database.
Block Level De-Duplication license may not be released on Change Host.
"Size of Stored Data" on Assigned Media may show incorrect size
Enhancement to not delete scratch tapes when deconfiguring a tape library.
CvLibraryOperation process may crash while running library operation jobs such as Drive Cleaning.
Restore or Auxiliary copy main fail with 'wrong encryption key' error when reading from a deduplication enabled secondary copy if its source copy was changed.
Prunable data from a migrated deduplication-enabled storage policy may not be removed from disk.
DDB recovery job may stay running in Prune records phase without any progress if one of the MediaAgents for the disk library is offline.
DDB Recovery job may go pending in "Prune Records" phase if there is a large number of records to play back on the DeDuplication DB.
DDB Recovery job does not have the correct progress in the "Prune Records" phase.
DeDuplication enabled storage policy copies to have 'Failover to new store' enabled by default.
DeDuplication enabled storage policy copies to have 'Failover to new store' enabled by default.
Offline Content Indexing job may restart from the beginning of an archive file instead of resuming from where it left before.
Recopy option may not set jobs as to be copied it jobs have invalid archive files.
The jobs on Vault/Mirror Snap Copy may be in Partial status when vault or mirror based auxiliary copy is done after backup copy operation.
A NetApp Snap Protect storage service related to a deleted storage policy may still exist.
After AuxCopy the jobs in secondary(non-snap) copies that are copied completely might still show as partial if the jobs are originally from a primary snap copy Additional Instructions This update will only fix the jobs that will get picked up for aux-copies going forward, the jobs that are already picked up should be fixed by executing a sql script Form# 10780
Auxiliary copy or restore from a deduplication enabled secondary copy may fail with error "OS could not find path specified" if a job was recopied and reconstruction had occurred.
Uninstalled software appears in the Backup Software, AntiVirus and Firewall, and Installed Software by Computer reports.
SRM File Level Analysis data collection may not complete on a VSA subclient that contains VMs that share the same disk identifiers.
Summary screens of Unix Virtual Machine may show empty file distribution charts when SRM is enabled. Additional Instructions None
Virtual Server Agent with SRM Option Enabled, SRM Analysis and File level Data is not shown in the reports and summary screens. Additional Instructions None
For Virtual Server Agent, duplicate VMs may get created when a Backup is run. Additional Instructions None
Server changes for creating discovered VM as a client
Virtual client discovery changes to merge with VM's having Simpana installed.
Deconfigured virtual machine clients may appear as configured if they are part of the VSA backup.
Installed Agnets from releases older than 9.0 may get deconfigured and upgraded in the database if the client is part of VSA backup. Additional Instructions None
Virtual Server Agent with SRM Option Enabled, SRM Analysis and File level Data might not be collected. Additional Instructions None
Modified Dyncache service to run on Windows2008 R2 and Windows7. Additional Instructions - This update requires 32365 update for functionality.
Dyncache Installer may cause a crash.
Dyncache Installation may fail while installing the updates. Additional Instructions 1). There is an bug in the installer source code is causing string buffer overrun.
2). The Older Dyncace executable is removed and new executable will be copied, while updating Simpana. Some time the older Dyncache Service is getting delayed to stopped completely. So deleting the old executable is failing.
Copy export dumps from Podcell to intermediary media agent may fail in case it is behind a fire-wall.
Access path may become offline in case its on shared media agent and target access path is mapped to the existing access path when 'importing from pod cell'. Additional Instructions This update requires another update (update from #10578).
SRM VSA Agent - Summary screens for a VM may not display any charts.
The aged jobs did not display if we did not click the "Advanced" button when viewing job history even if"show aged data during browse and recovery" is already set from ControlPanel-> Browse/Search/Recovery.
The SQL Agent is uninstalled but the subclient list shown in summary pane looks enabled.
"Discover Instances" operation for SAP For Oracle needs to be removed from the GUI options.
NAS Snap Protect GUI option should not be available on Non Netapp file servers.
Oracle Advanced Restore option "Point-in-time" setting is not being retained on revisiting advanced tab.
Oracle Advanced Restore option "Skip table spaces" values are not being retained on revisiting advanced tab.
If customized oracle scripts present, then script preview on backup and restore dialogs to show these.
Drive Validation may use a different media than the one selected.
Streams tab of Auxiliary copy job details screen has no clear indication as to which of the streams has the actual error.
"Mark Bad" option should not be given for To-Be-Copied jobs
Enhancement to support Prefetch command from GUI for ACSLS libraries emulated by CentricStor
The advance search option to change language does not work when the web client is installed in non english OS or if the selected language in browser options is other than English,
Resource and image extensions converted to PNG format.
Oracle GUI browse displays partial list of data files.
DB2 Backup fails on Linux with error failed to launch ClDb2Agent.
RMAN_UTIL interface GUI second copy Log Backups fails on Windows.
Oracle third party command line restore consumes lot of memory.
Oracle SrvOraAgent crashs when RAC and ASM installed on the client.
Oracle RAC backup fails on Windows 2008 R2
Commcell User Group permissions GUI issue - cannot associate library that is displayed under Media Agents
User is unable to configure SAP on Oracle iDataAgent because the SnapProtect tab is disabled.
In Tools->Add/Remove Software->Remote Software Cache tab, After sorting the list when a remote cache client is selected to delete, system will delete the wrong client, the client listed before sorting is deleted.
Add Security Check when assigning system owner capabilities
Add Security Check when assigning system owner capabilities
Restore file paths in file level restore are coming with Volume# prefixed.
Support for Documentum Backup/Recovery on windows.
Disk volume Reconciliation task may fail with error 'Disk Library Maintenance operation has failed'
Cannot start a in-place restore job when restore to same-folder checkbox is checked.
Able to do a out-place restore job without specifying the path.
When associating clients and client groups while creating scheduled policy, if user deselects a client and saves policy, the groups are lost from the association
Support for Documentum Backup/Recovery on windows.
Media Contents dialog for a disk library mountpath associated to a Deduplication enabled storage policy may show an incorrect value in the Data Written column.
Restore or Auxiliary copy main fail with 'wrong encryption key' error when reading from a deduplication enabled secondary copy if its source copy was changed.
Security setting not allowing Destination Client to be viewed during Restore
Customer only wants his people to do in place restores. To do this, ISFP user group was granted the following Capabilities:
-Agent Management
-Alert Management
-Annotation Management
-Browse
-Browse and In Place Recover
-Data Protection/Management Operation
-Report Management
-View
Browse backup data for any client the account has access to.
2Pick defaultbackupset
Click recover all selected
You will see the under Restore Destination the "Destination Client" box is empty and not able to do restore operation.
Automatic Schedule Enhancement to support network throttle.
Enhance Firewall to support load balancing
Fix to consider only 9.0 and above clients when retrieving firewall configuration data.
Failed to remove all the incoming ports and options when the last incoming connection is deleted.
When all Incoming Connections are removed, Outgoing Routes are also deleted.
Failed to save single port entry in Additional open ports under incoming Ports.
Restore or Auxiliary copy main fail with 'wrong encryption key' error when reading from a deduplication enabled secondary copy if its source copy was changed.
Drive Cleaning job fails with error messages 'The recording format of the drive is not compatible with the recoding format of the drive pool' even though drive can use the cleaning media based on media type.
Enhancement to allow end users to browse and restore from web client
CommNet Service will fail to start when full host name is used as client name during the installation.
CommServe updates status showing as "Unknown"
Sometimes after the first login, CommNet Browser does not display CommNet Tree, Standard tool bar and Status bar
Sometimes when CommNet Server database is restored to a different CommServer then licensing errors will appear
Unable to delete media agent when it is installed as restore only client.
qoperation checkready fails and indicates "Not Ready"
Unable to add external groups for a name server as it returns blank list of groups
Support to enable client side dedup and cache for laptop.
Fix to have global mail timeout settings.
Fix for the sending email to the logged in user in "testmail" functionality rather than the sender.
Provide Enhanced logging. Additional Instructions 1. Schedule report debugging level must be set to 10 (or higher)
2. A mailtimeout entry has to be added in gxglobalparam to set the timeout value. If no timeout value is set the defualt is 5 minutes. The units for this value is milliseconds.
Enhancement to support add/delete/overwrite Client owners and User groups in security at client level using qoperation
SharePoint Document restores incorrect version of document.
Find/Restore support for VSA IDA
On editing the selected group of "Outgoing Port" of Firewall the selection is not retained
When new subclients are created for SQL agent, password for Pre Post process for existing sibling subclients is lost.
MultiStream support for UNIX Image iDA (available only for CXBF backups)
OneTouch GUI Enhancements
1. "IP Address" field is added in Ethernet Device dialog.
2. Update 1-Touch recovery points dialog Close Button text should be "Exit".
3. Update Spell mistake on OneTouch Configuration dialog in case.
4. OneTouch Configuration dialog title will be “1-Touch configurations”.
5. Populate "CommServe Client Name" in "1-Touch Client Configuration" dialog.
6. Type field is showing Size information.
Orphaned media - allow multiple media to be selected to be moved to a library.
NetBackup DR jobs imported as Administrative jobs are not associated to media properly.
Additional Instructions Install this update along with update 30885.
EDC Discover Job misses some clients and schedule policies information from NetBackup Server when there is difference in OS version reported by NetBackup
Subclient properties content shows 0 databases for EDC snap backup
Cell Growth Report is not showing subclients of discovered clients in CommNet Browser.
Discovery job for NetBackup data may fail when there is more than one storage unit with the same media server and robot.
Fix to handle discovery of external clients with Simpana agent installed already.
Fix to handle merging libraries with multiple drive types by external data connector.
Fast pass discovered entities to be merged as deconfigured entities into CS database.
Support for multi streamed jobs during Fast pass discovery.
Fast pass NetBackup discovery job fails when previously discovered host name for a client does not match newly discovered host name.
Media prediction report for Content Indexing on a storage policy may not include some required media or may include media which have already been content indexed and are no longer required to be content indexed.
DB Upgrade may fail with the following error in the log file:
Violation of PRIMARY KEY constraint 'PK__BLEntityHistory__481BA567'. Cannot insert duplicate key in object 'dbo.BLEntityHistory'. (RecNum:1,State:995240)
Progress bar still displays at 100% after an auxiliary copy job picked newly completed backup jobs and restarted.
Auxiliary copy may keep failing with “Unable to seek to offset”.
Job progress bar for resumed AuxCopy jobs progresses ahead too soon and may reach and stay at 100% even when there is a lot of data still left to be read.
Backup not automatically exporting media after successful completion of job if job is started from schedule policy.
Multiple jobs may fail on a busy Commserver with error "Failed to get a response in the timeout period from CVD for process registration" and "Failed to get a response in the timeout period from Communications service for process registration"
Snap Incremental Virtual Server iDA backup jobs may fail with error "CreateIndex failed on MediaAgent [] - Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover"
For SRM Enabled NAS backup agent primary storage information may not be sent to CommNet during sync-up operation.
After successful sync, SRM NAS NetApp client summary may not show default subclient.
After successful sync, SRM NAS EMC Client summary may show all the subclients as default YES and the content as '/'
After successful sync, SRM NAS EMC Client summary may show Share Space Used in wrong unit (TB instead of GB).
After successful sync, SRM NAS clients (Celerra and NetApp) may not show volume and share information when there is any billable Entity or Cost Category being associated were deleted.
Billable Entity assigned for SRM NAS CIFS Share is not reset to 'Not Defined' when associated Billable Entity is deleted. Similarly Cost Category assigned for SRM NAS NetApp Aggregates, EMC Storage Pools, EMC Meta Volumes are not reset to 'Not Defined' when associated Cost Category is deleted. This issue can be noticed by looking at the Billable Entity Manager/Cost Category Manager. Those entries will not be shown in GUI. Additional Instructions Incorrect assignment of Billable Entity and Cost Categories (after deletion) is reset by the install.sql file
CommCell Summary report shows pseudo-clients as unreachable
Integrated SRM FS agent's (SRM enabled on FS Backup Agent) primary storage information is not sent to CommNet during synch operation.
Additional Instructions For SRM integrated NAS NDMP clients, use update from Update Form 10363.
New feature support for Virtual Machine Provisioning. Additional Instructions None
Creation of a new instance for Virtual Server App Type is allowed for a guest user who doesn't have required security privileges.
GUI freezes when a user with insufficient privileges (No "Administrative Management" capabilities) tries to Enable "snap protect" along with enabling "Enable retry on network errors"
Previous fix made to access remote caches in locked mode may not work correctly.
For UNIX IDAs, while deleting case sensitive file path from contents is leading to improper deletion of other files.
Show correct event message in the event viewer once Firewall is pushed.
Second Archive job may delete all the stubs from the previous job.
Enhancement for assigning capabilities to client owners.
Exchange Mailbox iDataAgent 2000, Exchange Mailbox iDataAgent 2003, Exchange Public Folder iDataAgent 2003, Data Archiver for Exchange Public Folder, Data Archiver Agent for Exchange 2000, PrimaryCIForExchange, DataArchiver Agent for Exchange, Data Archiver Agent for Exchange 2003, Exchange Public Folder iDataAgent 2000, Exchange 2003 Database iDataAgent
Description
The following problems are fixed in this update.
ExArcMonitor crashes intermittently. This crash is generally preceded by a hang
Creation of profile through ExArcMonitor now honors the sCASServerName registry key
Fixes ambiguous username resolution issue while creation of profile through ExArcMonitor
Fixed a stability issue wrt deleting profile in ExArcMonitor
Removed the flag CONNECT_USE_SEPARATE_CONNECTION of PR_PROFILE_CONNECT_FLAGS property, used in profile creation, as it's not recommended by MS.
CommServe, File System iDataAgent for Windows, Web Server
Description
The following problems are fixed in this update.
Display the Sets alphabetically
Show correct job status when web restore jobs are terminated abnormally
Handle special characters in the from field for smart filters.
Status column alignment fixed to LEFT on Download tab on web page.
Improve performance of Web Search Client.
The advance search option to change language does not work when the web client is installed in non english OS or if the selected language in browser options is other than English,
Show correct job status when web restore jobs are terminated abnormally
Handle special characters in the from field for smart filters.
Status column alignment fixed to LEFT on Download tab on web page.
Improve performance of Web Search Client.
The advance search option to change language does not work when the web client is installed in non english OS or if the selected language in browser options is other than English,
CommNet charge back report fails to provide data and times out for all Commcells. Log file contains error similar to:
Attempt to fetch logical page (1:205832) in database 2 failed. It belongs to allocation unit 4035241023232933888 not to 936764776684912640.
Qscript to Modify "Store Updates Locally" location on client. Additional Instructions This script takes Client Group as input. Below are the pre-requirement for Client Group option:
- The group should contain clients which supports entered path. For. e.g. Unix client does not support
Windows machine location. So Client Group with Windows clients should not contain Unix clients for this
script to work.
- The location given as "Store Updates Locally" should pre-exist on each client.
SharePoint Document backup of Non-English sites completed with one or more errors.
(Update 34254)
SharePoint Document backup failure for Meeting Workspace attendees lists that are missing versions.
(Update 34254)
SharePoint Document restore failure when the time format has changed on the server. (Update 34254)
Columns containing some extended ascii characters are restored with incorrect values. Additional Instructions New full data protection/archive operations are required with created DWORD registry value dwUseOmApi set to 1 under corresponding location HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\MSSharepointDocAgent and/or HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\SharePointDM prior to recovery/recall operation. Registry key dwUseOmApi is applicable only for SharePoint 2007 and 2010 versions.
(Update 35275)
SharePoint Document backup using direct database access hangs on a library/list configured with calculated columns.
(Update 36083)
SharePoint Document backup may fail to backup a document if the author's user account has been deleted and the account's security ID cannot be retrieved. (Update 36083)
Restore of SILOed data after CommCell import may fail to retrieve data from the SILO backup.
(Update 33425)
Update to have the Commcell Migration export template dump in the installation base to be used for cross version migration from 9.0 CommServ to 8.0 CommServ (Update 33425)
Send Log Files from CommServ GUI does not support passive FTP connection.
(Update 34630)
In backup job summary report, file sizes may be shown incorrectly for the files that are displayed in Protected Objects list. (Update 34732)
Enhance ldap search filter to support searching based on LDAP OU's (Update 34732)
In some cases when scheduled report delivery failed, the reason for failure in the log file is unreadable. (Update 34967)
Jobs in storage policy copy report in text(CSV or XLS) output format, there is a mismatch in the data and the columns due to the compression ratio column.
(Update 35206)
During GRC migration the job copy status may not be updated correctly - fully copied jobs may still appear to be 'to be copied' or partially copied.
(Update 35301)
Import from POD cell via intermediary media agent job may fail in case if intermediary media agent is GRC client since dump gets deleted while pulling.
(Update 35529)
Import from POD cell Job may fail with client or host name conflicts if intermediary MA client is captured. (Update 35529)
Snap Backup may go into pending when SRM Analysis with File Level Analytics is enabled. (Update 35568)
When running Job Summary Report for Data Recovery Jobs with Stub Recall option, report may not be generated if XML format is selected for the output.
(Update 35614)
Testing "alerts" for certain alert types causes an exception in EVMGRS (Update 35648)
Job Summary Report with "Stubbed Files" option may fail when the client doesn't have Archiver agent. (Update 35676)
SendLogFiles may only sends the last email when mail server size limit is specified in GUI.
(Update 35751)
FTP notification email subject is not editable.
(Update 35751)
EvMgrS.exe may crash when we try to send multiple CAB file chunks over the email.
(Update 35751)
SendLogFiles may not gather client logs with time out error (Update 35751)
Aux Copy Job Summary report does not have the Data Transferred on Network and Data Written columns.
(Update 35762)
Data Transferred on Network value for secondary copies in Jobs in Storage Policy Copies report is incorrect (Update 35762)
Copy export dumps from Podcell to intermediary media agent may fail in case it is behind the fire-wall.
(Update 35873)
When jobs are imported into a storage policy copy they may not get picked up as 'to be copied' for the corresponding auxiliary copy that uses this as source copy
(Update 35873)
CCM cross version export might take abnormally longer time for huge databases
(Update 35873)
Job Percentage is not updated as the job progresses for cross version migration export
(Update 35873)
After cross version migration any change in client property from commcell console GUI might fail for certain client operating system versions
(Update 35873)
After migration of data from static shared mount path in a cross-version export to 8.0 commServe restore of data in that mount path might fail
(Update 35873)
When Commcell Import fails due to conflicting entries in destination database the list of conflicting entries are not getting logged
(Update 35873)
Import of media locations may fail due to conflicts when a media location of the same name exists in the destination CommServe Additional Instructions This requires GUI update from Form #10604. (Update 35873)
Virtual Server Agent backup may go to pending state of any of the Virtual Machines have unicode characters in it. (Update 35919)
Support Prefetch command from GUI for ACSLS libraries emulated by CentricStor
Additional Instructions User need to setup SSH connection which is without user interaction, please check the documentation for the details.
(Update 35981)
Fix to have global mail timeout settings.
Fix for the sending email to the logged in user in "testmail" functionality rather than the sender.
Provide Enhanced logging. Additional Instructions 1. Schedule report debugging level must be set to 10 (or higher)
2. A mailtimeout entry has to be added in gxglobalparam to set the timeout value. If no timeout value is set the defualt is 5 minutes. The units for this value is milliseconds. (Update 36003)
Changing disk library properties may intermittently display an error popup: "Invalid or Missing Device ID" (Update 36032)
New feature support for Virtual Machine Provisioning. Additional Instructions None (Update 36054)
SRM NAS Agent Datacollection job may go into pending state when the Virtual Data Mover name contains special characters like hyphen.
Additional Instructions None (Update 32572)
Fix for issue where a MA with several jobs running failing to upload some index folders to Index Cache Server when connection to Index Cache Server is down and comes back later on. (Update 35571)
File Distribution Reports for SRM NAS Agents like largest, oldest, prohibited files may report some files with user name and group name as UNKNOWN.
(Update 35740)
File Distribution Reports for SRM NAS Agents like largest, oldest, prohibited files may show some files more than once with different values for user name, modified time, access time, etc.,. (Update 35740)
Running SRM jobs can crash Media mount manager on media agent (Update 35906)
When ACSLS server returns incomplete drive serial number list, the media may fail to mount with Drive SCSI Identifier mismatch error. (Update 35959)
New feature support for Virtual Machine Provisioning. Additional Instructions None (Update 36052)
SRM Data collection for NetApp Filer may fail with error "Failed to Collect Qtrees", when there exists many volumes and qtrees on VFiler. Additional Instructions None (Update 35241)
Fixes possible crash in EvMgrS (Update 35328)
0 client is not listed under Client Computers in GUI after it's installed to a VM Client pointing to 9.0 CS. (Update 35730)
The web console link does not take directly to the client if using IE8. (Update 35816)
Install of CS to a new machine with a CSDB Dump from another machine causes DB error during Send Log Files. (Update 35886)
Restored File on Win 2K8 R2 may contains "Garbled' characters in the first line of the file.
(Update 35895)
Failed to get the client list from the CommServe during 1-touch Offline restore.
(Update 35895)
During VM discovery job pre-installation of client with unicode characters in name failed. (Update 35895)
Auxiliary Job may fail with 'There is no active controller for this device' when disk library is used in primary storage policy.
(Update 35911)
Synthetic Full Job may fail and cause dangling reservations.
(Update 35911)
Auxcopy job may fail with job failure reason 'Error occurred while processing chunk...'
(Update 35911)
Backup jobs may wait for avaialble resources if one of the Media Agent goes offline when multiple data paths defined.
(Update 35911)
Jobs may go to pending with JPR: "Failed to get a response in the timeout period from Communications Service for process registration", due to resource reservation taking longer time than expected.
(Update 35911)
Support all license types for Express CS. (Update 36005)
Reconstruction job - when changing from Add records to Prune records phase is going to the Waiting Queue and job waits though no resources are needed.
(Update 36026)
Job progress goes from 90 to 0 percent during turbo stubbing phase. (Update 36026)
Push-install is failing for clients with Unicode name.
(Update 36028)
When a client upgrade job is initiated from commcell with out reboot check box selected, jobs waits for couple of hours and times out if the machine needed a reboot. (Update 36028)
New feature support for Virtual Machine Provisioning. Additional Instructions None (Update 36043)
- File level restores in Virtual Server iDA show 0kb size in GUI and Reports
(Update 31059)
- File level restores of compressed files from an Image Level/Virtual Server backup may create files with no data (Update 31059)
Restore job for Exchange DB may be marked as successful even if the restore process failed. (Update 34178)
Image iDA some file streams cannot be restored. (Update 34263)
File Level Recovery of Linux VM's shows completed with errors Additional Instructions This update has to be installed in the machine where the process fsindexedrestore will run during the restore as well as the client. (Update 34626)
SRM Windows FS Data collection job with Analysis option may go into pending state with job pending reason: "Loss of control process clBackup.exe." (Update 34827)
Communication Services (CVD) memory may grow on the MediaAgent when client side dedup backups run to it. (Update 35344)
Suspend laptop jobs instead of killing when laptops go on battery power
(Update 35357)
Don't pull automatic schedules from CS if FS IDA is not installed
(Update 35357)
Job monitor may mistakenly report still running jobs as the reason for why it can't start a new one. (Update 35357)
Deconfiguring FW services for a client by removing client from a client group may not remove FwConfig.txt file from client. (Update 35599)
CVD of client may crash when a job is killed or suspended.
(Update 35599)
1- Application error when doing file level restores for Image level.
2- Failure to restore compressed files with Unicode characters for Image level. (Update 35942)
Support to assign laptop owners based on user profiles configured on the client. (Update 35966)
New feature support for Virtual Machine Provisioning. Additional Instructions None (Update 36042)
Hardware snap creation will get failed if more than 2 filers configured in array management screen.
Additional Instructions In New XCLI installation on VSA proxy scenario use below registry key to avoid reboot to set XCLI tools path.
"'iDataAgent\XCLI_BINARY_LOCATION'" and set the value to install path of xcli
example: "C:\Program Files (x86)\XIV\GUI10" (Update 32980)
VSA Snap Protect on IBM XIV does not work in some cases. (Update 35992)
Windows mount points are becoming hidden when gxhsmservice started (Update 32564)
Recall fails when GXHSMSERVICERESTOREACLS registry key is set to "N". (Update 34279)
0 Test Automation script changes.
(Update 34396)
If the recall limit has been reached, requests are being denied even though process has been excluded.
Additional Instructions 1) Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\cvmhsm\Parameters) Under the "Parameters" key create a string value (REG_SZ) named ‘ExcludeProcessX’ (where X is the next
consecutive number in the list (i.e. ExcludeProcess1, ExcludeProcess2, etc)) for any process that should Not
initiate recalls.
2) Restart CommVault Services for the registry keys to take effect. (Update 35376)
Getting 0KB stub files in the file server for File Archiver Agent. Additional Instructions 1. When recall fails, the file becomes 0KB files until next service restart which copies the stub from the restub cache. In this particular incident, recall failed because recall activity was disabled in the CS as a result of JM could not start the restore job. But this failure could be applicable to any failure at the MA or the JM level preventing successful recall.
2. gxhsmutility was crashing when executed with incomplete -extoption command. (Update 35985)
RemoveUpdates with expireAll mode is disabled. (Update 35520)
Job details screen may not show correct backup size for SQL backup job when there are multiple restarts of the job. Additional Instructions For a subclient with multiple databases, the backup size will be approximated to the closest next chunk boundary and it may show marginally more data size as compared to the actual data size. (Update 35796)
Automatically expiring older updates on clients. (Update 35823)
Allowing remote caches to be used for client/updates installation while download software job is running.
(Update 35952)
Install software was falsely reporting success without installing servicepack when servicepack was corrupted.
(Update 35952)
CopySoftware fails when copy takes more time. (Update 35952)
Using the iPhone/iPAD application with Single Sign On enabled we receive the following [please check comcell connectivity] Additional Instructions For full functionality, update 35947 must also be installed. (Update 35947)
Unable to restore 0kb files using Image/VSA iDA Additional Instructions This update must be installed in the machine where the index cache is located (Media Agent) (Update 34961)
New feature support for Virtual Machine Provisioning. Additional Instructions None (Update 35929)
Restore job may go to pending with JPR "Failed to retrieve drive pool information" when trying to use an interrupted resource of a shared tape library.
(Update 31377)
Backup job may fail with JPR "Inline backup is not allowed when it points to a global deduplication policy whose primary copy has client side Deduplication enabled.", when Inline copy is pointing to a global Deduplication storage policy.
(Update 31684)
Jobs may wait a longer time to get resources on a heavily loaded CS when there is an Auxiliary job running with large number of streams.
(Update 31684)
Media Manager service may crash when there are multiple inline copies running at the same time.
(Update 31684)
Backup or Auxiliary Copy jobs may go to waiting with JPR: "There are no more spares" even though there is a usable active media in the library.
(Update 32147)
Active Media may not be marked full even with job option "Mark Media Full on Success" selected.
(Update 32147)
Disk Library setting "Spill and Fill" is not honored when one backup job requires more than one writer.
(Update 32147)
Dedupe Reconstruction job may go Waiting with JPR "The Index Cache for the MediaAgent is disabled" even though the index cache is not used for the job.
(Update 32147)
Drive Validation job may sometimes run to a drive other than the one selected from the GUI.
(Update 34418)
Drive Cleaning job may fail when more than one drive is selected due to JPR: "There is no cleaning media in the cleaning media group".
(Update 34418)
Backup or Auxiliary copy job may go to waiting with JPR: "There are no more spares" instead of running to active/appendable media.
(Update 34418)
Backup or Auxiliary copy jobs may go into an unresponsive state if a secondary copy has been recently promoted to be the primary copy.
(Update 34418)
Drive cleaning job may go to pending with JPR: "The recording format of the drive is not compatible with the recording format of the drive pool".
(Update 34418)
Auxiliary copy job may go to waiting with JPR: "License to use WORM Media is not available".
(Update 34418)
Auxiliary Job may fail with 'There is no active controller for this device' when disk library is used in primary storage policy.
(Update 35908)
Synthetic Full Job may fail and cause dangling reservations.
(Update 35908)
Auxcopy job may fail with job failure reason 'Error occurred while processing chunk...'
(Update 35908)
Backup jobs may wait for avaialble resources if one of the Media Agent goes offline when multiple data paths defined.
(Update 35908)
Jobs may go to pending with JPR: "Failed to get a response in the timeout period from Communications Service for process registration", due to resource reservation taking longer time than expected.
(Update 35908)
On Virtual Server Agent, Host Details information may take lot of time to display and consume CPU cycles. (Update 31620)
New feature support for Virtual Machine Provisioning Additional Instructions Virtual machine performance data, Host performance data will be collected from the time update is installed and old data will be removed. (Update 35880)
Copy export dumps from Podcell to intermediary media agent may fail in case it is behind the fire-wall.
(Update 35868)
When jobs are imported into a storage policy copy they may not get picked up as 'to be copied' for the corresponding auxiliary copy that uses this as source copy
(Update 35868)
CCM cross version export might take abnormally longer time for huge databases
(Update 35868)
Job Percentage is not updated as the job progresses for cross version migration export
(Update 35868)
After cross version migration any change in client property from commcell console GUI might fail for certain client operating system versions
(Update 35868)
After migration of data from static shared mount path in a cross-version export to 8.0 commServe restore of data in that mount path might fail
(Update 35868)
When Commcell Import fails due to conflicting entries in destination database the list of conflicting entries are not getting logged
(Update 35868)
Import of media locations may fail due to conflicts when a media location of the same name exists in the destination CommServe Additional Instructions This requires GUI update from Form #10604. (Update 35868)
Support for creating zip files for each of the groups in a review set. For files this group is defined by the File path and for emails this is the FROM field. Additional Instructions Note the related form 10199 must be installed on web client to test this form. (Update 34986)
Creation of CAB fails when there are many documents
(Update 35438)
Ability to send custom options to the zip process
(Update 35858)
Point in time browse based restore from Virtual Server snap backup may fail if the last Snap backup job is moved to tape.
(Update 35233)
Fix automatic owner assignment on upgraded commserv
(Update 35527)
Fix modification of backup content for a re-installed client (Update 35527)
Improves GUI Audit Report performance on very large database.
(Update 35642)
Fixes GUI Audit Report for Data verification job when change to "All" or "Full" options. (Update 35642)
Logging enhancement - better logging of database lock timeouts/ deadlocks if and when they occur
(Update 35695)
If a database operation fails, in some instances the database operation was not retried correctly
(Update 35695)
Enhancement - SQL trace template useful for troubleshooting.
Additional Instructions This update will place the SQL trace template into the BASE folder.
To actually use it, the template needs to be imported into sql profiler. (Update 35695)
Virtual Machine DIPs may accidentally be picked by Physical Machine backups. (Update 35709)
EvMgrS is crashing when you attempt to remove a snapprotect snapshot from Array Management when snapshots are from a deleted VSA client. (Update 35785)
Added enhancement to set the size limit for the primary jobs that can be copied to secondary storage policy copy by Auxiliary Copy job (Update 35838)
GUI Audit trail report job goes to pending state with error 'Loss of control process scheduledReport.exe' if any Audit event has large string values. (Update 35838)
New feature support for Virtual Machine Provisioning Additional Instructions None` (Update 35838)
Prevent export location to be deleted if it is used by schedules.
(Update 32178)
Library and Drive report is displaying "(0.00%)" under "Space Occupied". (Update 32178)
Laptop web console clients details may take a long time to load
(Update 34783)
Total backup size displayed on Laptop web console client details may not be correct (Update 34783)
Auxiliary copy jobs going to a deduplication enabled secondary copy may occupy more space than required if primary copy does not have deduplication enabled.
(Update 34989)
Support only Windows or Linux MediaAgents for the Deduplication DB.
(Update 34989)
Support Re-copy option for backup jobs on a SILO enabled copy. (Update 34989)
Aux Copy Job Summary report does not have the Data Transferred on Network and Data Written columns.
(Update 35760)
Data Transferred on Network value for secondary copies in Jobs in Storage Policy Copies report is incorrect (Update 35760)
Added enhancement to set the size limit for the primary jobs that can be copied to secondary storage policy copy by Auxiliary Copy job (Update 35837)
GUI Audit trail report job goes to pending state with error 'Loss of control process scheduledReport.exe' if any Audit event has large string values. (Update 35837)
New feature support for Virtual Machine Provisioning Additional Instructions None` (Update 35837)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33115)
Legal Hold restore job or Power restores try to restore the file attributes and fail to do so resulting in extra logging that fills up the logs. (Update 33367)
Legacy (non-VSS) system state backup does not back up hive files using the correct name.
(Update 34315)
Remove excessive logging during a file system restore (Update 34315)
Out of place restore fails to restore files with short file name(8~3 format). Additional Instructions The short file names are not backed up by default, this requires a registry key entry to be created. With this registry key the short file names get backed up and restored for in place restores. However for out of place restores the short file name was not being restored. (Update 35822)
Certain VM names may be incorrectly identified as a snapshot VMDK casing the backups to complete with errors.
Certain VM names will not be correctly renamed on restore. (Update 35378)
Silo Archival Job may go to pending in scan phase with JPR: "Backup Failed: Failure due to a backup failure and the current setting of fail on any backup failure." Additional Instructions none (Update 35622)
Index Cache Server support for Admin jobs (Update 35687)
Unix FS and archiver incremental backups might fail after synthetic full jobs with verify synth full option on. (Update 35687)
Live browse fixes and enhancements. (Update 35800)
Compliance restore from a NAS iDA backup to a UNIX MA reports failed with an X in a red circle but the file is restored.
(Update 34610)
Power restores for NAS data fail if a firewall is active between the webserver and the commserver.
(Update 34610)
Content Indexing jobs for large NetApp backups are failing.
(Update 34610)
AuxCopy of very old NAS archives fail with error "Failed to parse chunk header". Also NAS Content Indexing from a NetApp backup that was suspended and resumed misses some data. (Update 35776)
Virtual server agent with SRM enabled fails to process all Virtual machines when one of the VMs failed to be processed.
(Update 32795)
Virtual Server Backup jobs may be slow with SRM enabled and File Level Analytics enabled. (Update 32990)
SRM Data Collection job goes pending if multiple FileSystems and Quotas defined on the system. (Update 33535)
Integrated SRM Agent fails to collect information during CCR passive node backup. (Update 34458)
SRM Integrated Exchange Agent does not gather DAG Server information.
(Update 34848)
Exchange Integrated SRM Data Collection job for DAG servers may go into pending with Loss of control process SRMServer.exe. (Update 34848)
Schedules created for Install Updates, DR Backup with 'All clients' does not include clients which are installed after the creation of the schedule. (Update 35028)
File system Backups with SRM may fail or may run for a long time in Import Analytics phase when the client is a virtual machine and it is backed up using virtual server IDA also. (Update 35304)
Enhance SnapProtect for NetApp to handle different names for files servers. This enhancement includes supporting multiple interfaces on a single file server using one Array Management entry. This enhancement can be used for VMWare configurations where a public address can be used in array management while the VMWare server using a private network to access NFS exports from the file server. Also handled in this enhancement are handling different names for the same interface including recognizing full qualified names, not fully qualified names, and IP addresses as being the same array. (Update 35361)
After resuming a virtual server backup, it fails with the message "This subclient does not have any content, failing job" (Update 35412)
VMWare VM restore from a SnapVault copy sometimes fail with error "Error while reading pipeline buffer from MediaAgent". (Update 35470)
Sybase restore schedules created prior to 9.0 may not work after the commserve is upgraded to 9.0
(Update 35558)
EvMgrS may crash when the send logs operation was started and Commcell Console is closed when send logs operation in progress. (Update 35606)
The db2 user account name couldn't be saved on backupset level. (Update 35626)
New feature support VM provisioning. (Update 35765)
Fixes issue where application data size displayed is much greater than actual backed up data size, when there are lots of sparse files or Archiver stubs in subclient
Additional Instructions none (Update 34007)
Failure in rman_util interface backups for an 8.0 SAP/Oracle client using 9.0 Media Agents (Update 35747)
File Distribution Reports for SRM NAS Agents like largest, oldest, prohibited files may report some files with user name and group name as UNKNOWN.
(Update 35735)
File Distribution Reports for SRM NAS Agents like largest, oldest, prohibited files may show some files more than once with different values for user name, modified time, access time, etc.,. (Update 35735)
Utility to fix corrupt license where number of used licenses is shown to be higher than the number of available licenses Additional Instructions To run this utility, run the following command from the base directory: LicAalEvalUsageFix.exe (Update 35713)
On Subclient Property Content Tab, when Browsing clients, Laptop specific folders which are music, desktop, documents, pictures, videos are not appearing for Linux clients. (Update 35580)
Job Summary report: “associated media”, "Media Agent" may not be shown even if selected for SILO archive jobs.
(Update 35657)
Job Summary report: Report - Time zone does not honor selected date.
(Update 35657)
Job Summary report: Default value for “Group By” option is not working. (Update 35657)
For browse from NetApp image backupsets, the "Browse Options" dialog incorrectly displays a volume level browse option. If this volume browse option is selected the browse fails with a dialog indicating there is no data to restore. (Update 35679)
Job fails with error "This action is not permitted as this is a managed client [without software installed]." when the license is expired.
(Update 34534)
DB2 DPF Backup fail in Backward Compatibility with stream reservation error.
(Update 34534)
NAS SNAP Backup job without catalog runs BCD index restore phase. (Update 34658)
DAG Backup restart may go pending with error "no more streams available". (Update 34744)
JobManager may crash with higher debug level. (Update 34744)
JobManager may crash when running backups for virtual server agent. (Update 34744)
Copy software/Download software is allowed to run while install software is in progress. (Update 34943)
JobManager Service may crash during SQL agent backup. (Update 34992)
Percentage change is computed/dispalyed wrongly for traditional backups for overflow case where the difference is more than 4GB. (Update 35179)
Unable to kill jobs in suspended or completed status from Job controller. (Update 35411)
Backups may span too many tapes and not use the tape capacity correctly. (Update 35411)
Scheduled Report jobs may not work. (Update 35454)
Support Web Search Server for Express OEMs. (Update 35644)
Incremental Documentum iDA jobs may fail with error "CreateIndex failed on MediaAgent [] - Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover"
(Update 35644)
Client limit is increased to 25 for Express CS (Update 35644)
The "Use SCP filters" option appears to be deselected by default for laptop backup agents newly added to a Commserver and made a member of a subClient Policy. (Update 35633)
When choosing Advanced Option for installing 32-Bit Content Indexing for Express OEM, nothing was getting selected.
If NDMP Remote Server is selected pressing the Back button on the Summary screen causes QInstaller.exe into an endless loop.
If the user specifies CPU type folder (Win32 or WinX64) in the path (e.g., C:\Custom-Win32-Package) when creating custom package, it does not create the CustomPackage correctly in the path specified
Installing WebClient on top of an existing WebServer fails while extracting files.
CommServe upgrade fails if Capture/Merge databases are present.
Fix for standalone MSI updates.
Uninstalling Content Indexing Server, but leaving File System iDataAgent installed could cause CVD to crash.
Too many Web Server Role Services added during Web Search Server install
Don't autoselect MA on DISC2.
An enhancement to allow users to install the custom package in decoupled mode.
No longer check for Service Pack on Maintenance Advantage site.
Job converts to full on a cluster configuration on first failover after enabling change journal of volume.
(Update 30390)
Bugcheck C4 with driver verifier loaded during system shutdown. (Update 30390)
System can become unresponsive or hang during periods of extremely high I/O activity on volume. (Update 33775)
Bugcheck caused by cvmfsj.sys driver during rename operations while kernel memory allocations are failing leading to system abort of monitoring folders. (Update 35586)
Enhancement to support Kill running jobs option in CommserverDRRestoreGUI. Additional Instructions This patch needs CommserverDRRestoreGUI patch(10121 update form)to verify the fix. (Update 35549)
Script to add (or remove) Bcc column for Email Results Panel Additional Instructions From command line of any client in commcell, navigate to base folder and perform login using command called qlogin
Then to add Bcc column for email results panel in web client, run below command:
qoperation execscript -dbn DM2 -c 'client Name' -sn BccColumnForEmailResults -si 'add'
'client Name' -- client name of the Webserver machine
Hint: To find the correct client name to use, login to web server machine, open registry and get the name of child node under following path: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\Machines
If you want to remove Bcc column from email results panel in web client, run below command:
qoperation execscript -dbn DM2 -c 'client Name' -sn BccColumnForEmailResults -si 'remove'
(Update 35548)
1-Touch support for Japanese localizaiton. (Update 33855)
Support for Non-Interactive Restore recovery for Windows.
Temporary offline(MININI]client now installs IP address as hostname for name resolution and deletes the temporary client from the commcell console after successful recovery. Additional Instructions This update requires that Windows update 9.0.0B84_34512 is present.
(Update 34532)
1-Touch Offline Restore not Honoring Copy Precedence Selection.
1-Touch Online/legacy recovery assigning DHCP when Static IP address set in client preparation during Windows 2008 installation. (Update 34835)
1-Touch Offline restore is pending while restoring RSM component from non-vss backup.
(Update 34982)
1-Touch Offline restore is not restoring windows event logs, RSM or WMI from non-vss backup.
(Update 34982)
System state restore of System Protected Files (SPF) sets current date on Simpana (SPF)base files.
(Update 34982)
Added 1-touch Live DVD support for non-interactive recovery (Update 34982)
Error code 14 when performing 1Touch Recovery during mass storage driver installation. (Update 35547)
Database troubleshooting fix - If a database query is creating a lot of locks which locks out other queries, the query which looks for such locks may take a significant amount of time to run causing other issues.
(Update 35539)
Active lock detection job created using Dbmaintenace tool may fail to run.
(Update 35539)
Deconfiguring a media agent may fail with errors in the log similar to the below in case a commcell migration has been performed and if the deconfigured media agent was part of an answer:
PopulateMMHostTbl () - INFO : Adding/Deleting a row in MMHOST table for Media Agent
PopulateMMHostTbl () - ERROR : CVMMDBMediaAgent::AddHost/DeleteHost failed. MM Error [Failure during delete operation on CommServe Database.] Error Code [-1]
SetClientError () - ERROR : Failed to drop entries from Media Manager tables
(Update 35534)
Incremental Documentum iDA jobs may fail with error "CreateIndex failed on MediaAgent [] - Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover"
View catalog content shows the file type as number rather than data/index/log etc.
(Update 35148)
View catalog contents option is not shown for the Full Appendable media type.
(Update 35148)
Catalog option may not work from the media by job id window.
(Update 35148)
Catalog and merge job may fail when job run from media level in drive of standalone tape.
(Update 35148)
Unable to select a non-default Media Agent for a library in the Datapath tab of the Advanced Restore options screen.
(Update 35291)
Enhancement to allow setting export location of media in bulk from Media In Library view.
(Update 35291)
On an upgraded commcell, secondary copy created for a non-Dedup storage policy may default to Object-level deduplication instead of block-level.
(Update 35291)
SQL "Out of place" restore schedules run as inplace if user edits "SQL Advanced Restore" options other than Database name and Physical Path.
(Update 35366)
Resubmitting a modified SQL "Out of place" restore job, the restore runs inplace. (Update 35366)
Display new messages for clients on Gui that were added for push jobs. (Update 35404)
Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers.
(Update 35494)
Oracle RAC database duplicate job submission fails with streams not selected error message.
(Update 35494)
Webclient does not respond to new requests after installing SP2 Additional Instructions After installing the update you may need to start "CommVault Tomcat Service" manually. (Update 35466)
When performing a snap restore on exchange 2010 from a cycle in which there was a full and at least two incremental backups will fail and the restore job will hang in the post restore phase. (Update 31044)
SharePoint Database Site Index backup fails on SharePoint Portal Server 2003 when the Size Index is big. (Update 33530)
SharePoint Database backups of Service Applications leave staged files behind in the Job Results directory.
(Update 35151)
Adds support for backup of SharePoint Site collections using Database SnapShots when DWORD registry value "bUseSPAPI" is set to "1" under HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\MSSharepointDocAgent. (Update 35151)
SharePoint restores might fail after installing update 35126. (Update 35451)
Change library on media tool - Added support to change library of media by barcodes. Additional Instructions Note - in 9.0 changing the library of exported media can also be done from the GUI. This tool can be used to do it from a list of barcodes in bulk (same as the 8.0 version allows - this is a forward port of that enhancement) (Update 35409)
Update install could fail with timestamp error for binary [RemoveUpdates.exe]. (Update 34356)
Drive Validation job may sometimes run to a drive other than the one selected from the GUI.
(Update 34421)
Drive Cleaning job may fail when more than one drive is selected due to JPR: "There is no cleaning media in the cleaning media group".
(Update 34421)
Backup or Auxiliary copy job may go to waiting with JPR: "There are no more spares" instead of running to active/appendable media.
(Update 34421)
Backup or Auxiliary copy jobs may go into an unresponsive state if a secondary copy has been recently promoted to be the primary copy.
(Update 34421)
Drive cleaning job may go to pending with JPR: "The recording format of the drive is not compatible with the recording format of the drive pool".
(Update 34421)
Auxiliary copy job may go to waiting with JPR: "License to use WORM Media is not available".
(Update 34421)
GAC registration was not happening after SP2k10DMServer.dll related patch is installed. (Update 34545)
Content Indexing install from DVD could fail during the early install phase (Update 34633)
Enhancement to expire installed updates on windows clients (Update 34671)
Content Indexing install from DVD could fail during the early install phase (Update 34702)
GUI may falsely show missing updates for Base client after pushing SP2. (Update 34900)
Commvault SQL services will be started/stopped during a special patch install (Update 34905)
Update or Servicepack uninstall could fail for patch having 'RemoveUpdates.exe' (Update 34905)
Update or Servicepack uninstall/re-install fails if patch contains 'CVRestart.exe'
(Update 34905)
Update installation fails for Matador update that exceed 256 characters when applying to 1-Touch WinPE (Update 34905)
Install Updates job from 'Remote Cache' might fail with 'Servicepack Integrity' check (Update 34938)
GUI Reports Needs Update even though latest Service Pack has been applied. It happens for unix client configured to get updates from Remotecache. (Update 34938)
Enhancement to install third party driver (Update 35036)
Reservations for auxiliary and dataverification jobs may take a long time.
(Update 35049)
JMJobResourceHistory table may grow very large due to redundant/duplicate job resource reservation history entries. (Update 35049)
Tomcat service does not get enabled if user selects option to not start services. (Update 35305)
Delete updates from saved folders on the machines if there was no install activity in last 15 days which results in freeing up disk space.
(Update 35324)
Remote Software Cache Configuration screen is not showing windows and unix timestamp for the packages.
(Update 35324)
Update installation might fail on clients getting updated from remote software cache when same remote software cache is involved in more than one job. (Update 35324)
Intermediary media agent support for Import from Pod Cell feature
(Update 31188)
Various fixes for "Import from Pod Cell" feature
(Update 31188)
Support tape catalog/merge from the GUI (Update 31188)
During GRC migration the job copy status may not be updated correctly - fully copied jobs may still appear to be 'to be copied' or partially copied.
(Update 35299)
Update to Add Foundation.dll to WorkStationBackup and LotusNotes_DM products. (Update 33482)
After applying ML11, Browsing data fails to show any results when index cache on CS is configured on a network share. (Update 33493)
Restore Enhancements for VMware.
(Update 34361)
Content Indexing job for NAS data may fail with error "Release reservation failed as the specified reservation was not found in the database table".
(Update 34473)
Auxcopy may fail with error "Cannot get encryption keys for archive file NNNN", if the source copy is done with encryption and Store-Priming operations.
(Update 34473)
After Commcell Migration, Restore/Auxilliary copy of the migrated data on a local commcell policy (Local Mount Path) may fail. Additional Instructions none (Update 34473)
Support for Linux file level restores to Linux Image iDA. (Update 34485)
VSA file level restores may fail complaining about insufficient priviliges. (Update 34485)
Documentum restores fail after installing SP1b (Update 34637)
CVMA occasionally crashing on index cleanup (Update 34681)
ArchiveIndex is failing to access renamed folder. (Update 34799)
Auxilliary copy for NAS attached tapes with hardware encryption may fail after copying NAS index files. (Update 34896)
Proper handling of job results directory cleanup for SQL iDAs jobs (Update 35062)
Support for virtual server iDA multi VM restores. (Update 35113)
The data classification for exchange feature is disabled. The CVD launches a thread to monitor the exchange DC. This DC thread in CVD is disabled with the update (Update 35158)
Point-in-time browse might fail for exchange mailbox archiver (Update 35213)
VSA Livebrowse support
(Update 35254)
Support application Log truncation during VMware SnapProtect Phase for Application aware backup for granular recovery.
(Update 35254)
SnapProtect Test tool is enhanced to validate whether customer's hardware array and client configuration supports Snap Protect operations without requiring Commserve install. (Update 35222)
Qlogin is failing to establish a connection with Firewalled CS. (Update 32504)
"qlist lastjob " does not perform as supposed to. (Update 33588)
qoperation merge, qoperation capture commands are no longer supported. (Update 33828)
qoperation execute does not replace exact supplied command line parameters in the case where there is more than one leaf node with same name but different intermediate parent.
(Update 33866)
QScript execution may fail if the input parameters are not quoted by single quotes.
(Update 34060)
When ever default subclients is created by server(backend) SnapProtect flags gets enabled if NetApp Snap Management License is present (Update 34749)
CommCell GUI may stop responding when browsing for SRM NAS Folders from "SRM Cost Analysis -> Billable Entity Manager -> Billable Entity Association -> Folder" level.
(Update 34840)
Properties of existing subclients like include folders, exclude folders, include attachment, exclude attachment are modified when new subclient gets created for LNDM. (Update 34840)
Unable to change the exchange database subclients content. (Update 34840)
qdelete spcopy fails to delete the storage policy copy and returns success. (Update 34841)
Do not require snap management licenses consumption for NetApp primary filer when client is enabled for snap protect. (Update 34980)
SQL subclients have storage policy overwritten after 9.0 upgrade. (Update 35031)
Jobs running to a SILO enabled DeDuplication storage policy may go pending with JPR: "Mount Path does not have enough space." (Update 35100)
CommNet Scheduled Reports may go into dangling state if they run for longer than 3 minutes. Additional Instructions This script allows to set number of minutes scheduler will be expecting report generation to complete (Update 35171)
SRM Storage Inventory Report may provide inaccurate results. (Update 34594)
FS Archive - Update Reparse Tag after 9.0 upgrade fails
(Update 34651)
For FS Archiver and File System Data Migrator, when deep path files are being archived, it may generate a 0KB file.
(Update 35052)
When a FULL FS Archiver job is run with a new Index, followed by an incremental job, and if the FULL job is deleted, user may not be able to browse any data from the incremental jobs.
(Update 35052)
When doing system state backup using File system agent, if one or more components fail, the list of failed files in the job details would show up as "[%s] Failed" instead of the failed component name.
Additional Instructions FS Archiver and File System Data Migrator can support migration of files upto a 800 character file name length (including the file path). However, the limitation is dependent on the number of bytes used in the translation when using unicode or multibye character sets.
(Update 35052)
Backup Job when run with SRM Discovery option goes into pending state with job pending reason: "Loss of control process clBackup.exe". (Update 35166)
Help ID for Change User Account is not available. (Update 34988)
Enhancement to support browsing from snapshot for Virtual Server Agent (Update 35055)
"Skip Catalog Phase" job option may be visible for agents for which it is not applicable (Update 35076)
Enhancement to support Erase Data from the Find window.
(Update 35131)
Commcell Console Web GUI launches in half Dutch & half English
(Update 35131)
Changed the Firewall Text at Client Group Level. (Update 35131)
Schedules created for Install Updates, DR Backup with 'All clients' does not include clients which are installed after the creation of the schedule.
(Update 35131)
Install software wizard needs to have "Install Updates" checkbox hidden (Update 35131)
Oracle table browse with dependent options don't work correctly (Update 35131)
SQL Server iDA backups appears to discover database twice depending on the case sensitivity of the database. Additional Instructions To cleanup the existing duplicate contents you need to delete the database from subclient property dialog manually. This update will prevent discover of duplicate contents in future. (Update 32752)
In some cases, SQL Server restore process hangs when restoring full backup. (Update 33602)
During backup if fetching of the backup metadata from MSDB takes more than 15 seconds then CS DB was updated with empty rows causing browse to fail.
Restore of database failed with the error “Database in use”.
Additional Instructions To increase the timeout value for Query thread:
Created in: Client
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance
Key: MSSQLAgent
Value Type: DWORD
Value Name: nSqlQueryWaitMaxRetryCount
Value Data: default value is 5 (5 retries; each time wait 5 minutes)
(Update 33896)
During log shipping if source and destination are on two different timezones then the restore of log backup on destination fails. (Update 34889)
When SQL native Compression is enabled along with tunable parameters restore of the db fails with the error "The database cannot be recovered because the log was not restored. RESTORE DATABASE is terminating abnormally." (Update 35126)
If user has one Full and few Log backups in the restore dialog of single database in the database chain combobox the Full backup is shown last and log backup follows that. (Update 35123)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33256)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33275)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33380)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33443)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33573)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33671)
When running an AuxCopy for all copies of a storage policy that contains both a primary-to-vault and a primary-to-mirror from the same primary snap copy, one of the copies sometime will fail with error "Error occured while creating a new backup version". On retry the copy succeeds. (Update 33987)
Virtual Server SnapProtect job is failing when mounting datastores on NetApp snapshots.
Pre-requisite: Before installing this update, please make sure to unmount all mounted snapshots and then install. (Update 34887)
Enhance SnapProtect for NetApp to handle different names for files servers. This enhancement includes supporting multiple interfaces on a single file server using one Array Management entry. This enhancement can be used for VMWare configurations where a public address can be used in array management while the VMWare server using a private network to access NFS exports from the file server. Also handled in this enhancement are handling different names for the same interface including recognizing full qualified names, not fully qualified names, and IP addresses as being the same array. (Update 35084)
SRM FS Clients that were originally part of agentless data collection discovery may not synch up primary storage information with CommNet. (Update 35069)
Add NAS iDA support for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers. (Update 34975)
In Backup Job Summary report, Data Written sizes in Summary table do not match with the corresponding aggregations of Data Written sizes in Detail table. (Update 35017)
Enhancement to show the Total Capacity in the License Summary Report - Capacity Usage table. (Update 35039)
Schedules created for Install Updates, DR Backup with 'All clients' does not include clients which are installed after the creation of the schedule. (Update 35026)
This update contains the following changes:
(Update 34304)
Optimizes the processing of large number of items from searches performed using content director policy to perform operations like Restore to review set and Legal Hold
(Update 34304)
New feature to display information grouped by FilePath and Custodian for review set and legal hold.
(Update 34304)
New feature to display filters for a review set and legal hold to filter by File Path and Custodian.
Additional Instructions Requires FormID:9733 & 9736 (Update 34304)
Add NAS server types for Dell FS7500 and NX3500, HP X9000, and IBM SONAS file servers.
(Update 34526)
Server side changes for DB2 use Snap restore option (Update 34792)
Support for smart filters and groups at review set and legal hold. Filters can be created by sender name or path
(Update 35001)
Support for searching Legal Holds
(Update 35001)
Downloaded files have the original names.
(Update 35001)
Fixes to support processing of 200,000 items as part of content director policy
(Update 35001)
Lotus Notes eMail search results have empty "from" column in the search result page when viewed in eMails view. Additional Instructions To enable filtering and grouping feature, run the following command from (command prompt by navigating to install folder\base folder) on any machine inside your commcell:
qoperation execscript -dbn DM2 -c 'client Name' -sn UpdateSettingValue -si 'ALLOW_RESULTS_GROUPING' -si 'TRUE'
'client Name' -- client name of the Webserver machine (Update 35001)
Support for smart filters and groups at review set and legal hold. Filters can be created by sender name or path
(Update 34999)
Support for searching Legal Holds
(Update 34999)
Downloaded files have the original names.
(Update 34999)
Fixes to support processing of 200,000 items as part of content director policy
(Update 34999)
Lotus Notes eMail search results have empty "from" column in the search result page when viewed in eMails view. Additional Instructions To enable filtering and grouping feature, run the following command from (command prompt by navigating to install folder\base folder) on any machine inside your commcell:
qoperation execscript -dbn DM2 -c 'client Name' -sn UpdateSettingValue -si 'ALLOW_RESULTS_GROUPING' -si 'TRUE'
'client Name' -- client name of the Webserver machine (Update 34999)
Resource (CSS/images) for filter/grouping options at reviewset and legal hold
Additional Instructions This update has to be installed along with Forms 10198 and 10199 which has service side and UI changes. (Update 34995)
Enhancement to create client group only for VCenter and not for individual ESX server during Virtual server Agent Backups.
Additional Instructions None (Update 34476)
1- VSA VMware snapshots are being left behind in certain cases.
2- Prevent use of san transport mode for restore of thin provisioned disks when auto transport mode is selected.
3- File level incremental backups using VADP are backing up as much data as the full backups
4- For file level backups using VADP, added support to filter files/folders of a specific volume Additional Instructions 1. VSA agent created Orphaned snapshots older than 24 hours will be removed during next backup of the VM.
Interval can be modified with the registry key
VirtualServer/nExpireSnapshotHours DWORD # of hours (0 = disable)
2. [VMName] Warning Snapshot creation exceeded threshold [0:15:20]
Duration can be modified with the registry key
VirtualServer/nCreateSnapshotThresholdMinutes DWORD # of minutes (0 = always warn) (Update 34978)
Allows graceful shutdown of the Deduplication DB (DDB) when the machine where DDB is configured is shutdown. Additional Instructions 1. GPO policy "Maximum wait time for Group Policy scripts" should be set to 30 minutes or to user's preferred timeout period which should be longer than 25 minutes.
See following link for details under "Specifying maximum time for startup scripts to run":
http://technet.microsoft.com/en-us/library/cc179134%28office.12%29.aspx
2. Before uninstalling this patch, user should run following command line:
AddScriptToShutdownGPO.exe -vm Instance001 -uninstall
Replace Instance001 with the install instance.
This procedure is required in order to clean entries associated with the VB script in the registry and Windows INI file. (Update 34948)
Lotus Notes offline Content Indexing Jobs fail. (Update 34094)
For legal hold items everything is treated as normal files as the email related properties gets lost during CI of restored data.
AuxCopy.exe was crashing while pushing only review set tags or CI tags.
In both case one of them remains empty causing null pointer access
Fixed the crash. (Update 34929)
From Field missing in search results for LN emails. (Update 34929)
In Consecutive Job Failure report with time range selection as last N days, the end time will spill over to more number of days than what was selected. (Update 34828)
Support moving from permanent to permanent extension license type. (Update 34119)
License application failed with Invalid license file error. (Update 34119)
CommNet Agent licenses can not be released on CommServe without MediaAgent installed.
(Update 34558)
MediaAgent license is not released correctly when MediaAgent is uninstalled (Update 34558)
Cannot Reset Capacity Usage when it's over capacity with Enterprise only CS. (Update 34563)
Auxiliary copy or Data verification job may not run or goes to pending with JPR: "Loss of control process auxCopyMgr.exe ..."
(Update 34604)
During client installation Commserv CVD service may crash due incorrect update schedule values in the database where CS is in a timezone (Country) which doesn't support standard/daylight time. Just has one single time. (Update 34704)
SNAP backup option is enabled on default subclients at install time when NetApp Snap is present. (Update 34758)
Express CS - Support moving from eval to permanent extension license type. (Update 34826)
License application may fail on capacity based CS with error "Invalid license file". (Update 34826)
DB2 Backup fails on one of the databases. (Update 33515)
DB2 Incremental backup throughput is affected by archive logs inclusion in backup image. Additional Instructions Please set the following registry key to Yes under Db2Agent/.properties on DB2 client machine.
SKIPLOGSINBKPIMG Yes (Update 33685)
Support for Sybase backup and restores in a firewalled environment (Update 33939)
Next run time for weekly schedules may not be correct after modifying the schedule (Update 34433)
DB2 Backup fails when performance satistics is enabled with registry key. (Update 34636)
EvMgrs may crash when SQL DB becomes unstable because of locks
(Update 34654)
Request for automatic schedule information may exceed SQL threshold time. (Update 34654)
Disconnect users from database before initiating DB2 database level restore.
(Update 34810)
Restore only required logs during DB2 Database Restore and Recovery.
(Update 34810)
Support for running Backup and Recovery operations using non instance owner user
(Update 34810)
DB2 Redirect Restore fix to set container paths relevant to the point in time selected..
(Update 34810)
DB2 cross machine restore from snap backup needs catalog database on the destination client.
(Update 34810)
Support for DB2 Backup with UNIX Shell auto export settings enabled
(Update 34810)
One Touch Recovery for Linux failing with error:
*** Received CommServe Software Install Manager Error 67109493 :
*** Failed in Install Requirement phase for [UNIX File System iDataAgent]
*** package. Please check Commserve log files for more information.
*** Setup Failed due to the above error.
(Update 34773)
Avoids a possible data loss when performing an auxiliary copy of CommCell migrated data.
(Update 33857)
Auxiliary Copy Job Details shows incorrect throughput in the progress tab. (Update 33857)
Support auxiliary copies of commcell migrated data. Additional Instructions Note - this requires the three prerequisite updates also in order to
CCMAuxCopyIssue (32669), CCMAuxCopyIssue-2 (32724) and AuxCopyAfterCCM-PreReq3.
Additionally a regkey needs to be set that Commvault Support should be contacted about.
(Update 34496)
Enhancement to associate first storage policy created for matador library to default subclient of Virtual Server client. (Update 34650)
Backup or Auxiliary copy job running to disk library may not span immediately to a new mountpath when the current mountpath is out of space.
(Update 34650)
Media that should be showing as active or appendable with data on them are sometimes shown with spare media icon.
(Update 34650)
MediaManager service may crash during unmount snap operation.
(Update 34650)
Duplicate barcodes may appear in media in library view when export is run caused by two library controllers incorrectly being active at the same time.
(Update 34650)
Jobs going to a deduplication enabled copy that was created in a previous release may occupy more disk space if the "Do Not Deduplicate against objects older than " option is turned off.
(Update 34650)
Restore from backup jobs that are encrypted in a secondary copy may fail if the source copy is changed for that secondary copy.
(Update 34700)
Software Compression incorrectly occurs on the client even though it is disabled at both subclient and copy level.
(Update 34700)
A global deduplication policy should not have data from different commcells.
(Update 34700)
User may not be able to modify retention rules of the primary snap copy when P-M-M and other mirror copies exist.
(Update 34700)
Silo backup jobs of a secondary copy are not automatically selected for auxiliary copy. (Update 34700)
CommNet Media Prediction report may incorrectly report larger number of tapes consumed than actual.
(Update 34764)
Jobs going to a deduplication enabled copy that was created in a previous release may occupy more disk space if the "Do Not Deduplicate against objects older than " option is turned off.
(Update 34764)
Enhance the Disk library properties dialog to show following charts
a. Used Vs Free Space Comparison
b. Data Written Vs Application Size Comparison
c. Space Consumed Vs Space Freed rate Comparison, Also space outage data based on the current rate of consumption
(Update 34764)
Enhance the Library and Drive report to show space savings information (Update 34764)
Enhancement for Dell disk array configuration. (Update 34764)
Data size in Silo shown in Storage Policy Copy Properties and Storage Policy Report does not include the size of volumes processed by Silo Disk Cleanup.
(Update 30456)
Size of Dedupe DB is shown incorrectly in the Storage Policy report.
(Update 30456)
New option in Commcell configuration report to show index cache content information Additional Instructions This update needs to be installed with the GUI update form 07496 (Update 30456)
The 'Pause and Recover Current Store' option is incorrectly selected by default for a newly created Deduplication enabled storage policy even when the MediaAgent is at an older release.
(Update 30803)
Enhancement to show the estimated baseline size on Deduplication tab of Storage Policy Copy Properties and on the warning message sealing the deduplication store.
(Update 33901)
When a Deduplication enabled Storage Policy copy is created, the default value of "Do not deduplicate against objects older than" was set incorrectly to the retention of the copy.
(Update 33901)
Opening the properties for a Global DeDuplication Storage policy may take a long time.
(Update 34755)
Warning message for sealing a deduplication store may display the wrong value for space available on disk library.
(Update 34755)
Browse backup data may not show the drive names on the table
(Update 34713)
Enhances the Magnetic library properties dialog to show following charts
a. Disk Space Utilization
b. Disk Space Savings
c. Average Daily Disk Consumption, Also space outage data based on the current rate of consumption
(Update 34742)
Install updates from commserve level may not show some clients that have software installed
(Update 34742)
SQL restore schedules created prior to upgrade to 9.0 cannot be edited
(Update 34742)
User name not being populated in Compliance policy creation.
(Update 34742)
Remove the Firewall configuration tab from the old release clients. (Update 34742)
Laptop2Taskbaricon to support Windows UAC. (Update 32775)
Laptops may cause periodic errors in CommServe CVD log like: "Recv failed to read 4 bytes"
(Update 34569)
Throttling configuration may cause creation of routes in a client's FW config toward itself (Update 34569)
Synthetic Full may generate events about some data buffers not being encrypted due to data expansion. (Update 34616)
Network-optimized DASH Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled.
(Update 34680)
Added display of Web console URL on laptop monitor.
(Update 34735)
Added displaying of current file name for Windows. (Update 34735)
Backup copy job may hang at completed state with a DB arithmetic overflow error.
(Update 34438)
Oracle cross check for snap jobs after backup copy may not work.
(Update 34438)
Each DDR backup gets a new repset id.
(Update 34438)
Signature generation was occuring on the client even though the deduplication option is disabled in subclient-property.
(Update 34438)
Software compression was not occurring on the client even though signature generation for Deduplication is configured to be done at source side.
(Update 34438)
Signature generation should be performed at on MediaAgent side for MediaAgent Side Deduplication if it is configured so in the sub-client property.
(Update 34438)
Enhancement to optionally skip catalog phase for NAS snap backup. (Update 34438)
Auxiliary copy job may not copy Oracle log only snapshots to a vault or mirror copy.
(Update 34439)
Restore from partial backup jobs that are encrypted in a secondary copy may fail if the source copy is changed for that secondary copy.
(Update 34439)
Backup or Auxiliary copy jobs may go into an unresponsive state if a secondary copy has been recently promoted to be the primary copy.
(Update 34439)
A global deduplication policy should not have data from different commcells. (Update 34439)
Restore from backup jobs that are encrypted in a secondary copy may fail if the source copy is changed for that secondary copy.
(Update 34698)
Software Compression incorrectly occurs on the client even though it is disabled at both subclient and copy level.
(Update 34698)
A global deduplication policy should not have data from different commcells.
(Update 34698)
User may not be able to modify retention rules of the primary snap copy when P-M-M and other mirror copies exist.
(Update 34698)
Silo backup jobs of a secondary copy are not automatically selected for auxiliary copy. (Update 34698)
Skip answers and continue "Import From Pod Cell" job if source CS is offline.
(Update 33405)
Resubmission of import job does not preserve the option consume license.
(Update 33405)
Resubmission of import job fails with error Validation of dump directory failed.
(Update 33405)
For Import from POD cell, even if the remote Commserve is online, the CCM job is forced to be saved as script rather than registering the schedule on the remote Commserve directly. (Update 33658)
Remove GUI Options for Data Classification for Exchange (Update 34387)
Unable to submit Restore Job from EZ Operations wizard
(Update 34425)
Unable to convert a Schedule to Automatic Schedule (Update 34425)
Chinese character can not be used as schedule name.
(Update 34425)
Schedule configuration which was created with chinese character name was lost after creating a schedule with english name. (Update 34425)
Enforced minimum throttling value to 256 Kbps
(Update 34425)
Browse for Content on AIX and Solaris file system agents show folders like "Desktop, Documents, Movies, Pictures, Videos" (Update 34425)
Express install is not showing eval token licenses correctly in 9.0 (Update 34488)
For VMware, File level and disk level restore should show Linux clients also part of destination clients. (Update 34488)
Billing configuration does not retain settings and Commcell Console freezes (Update 34553)
"Find" option in "Erase Data by Browsing" feature of Exchange mailbox/public folder agents shows find window in minimized state. It will be always on the task manager unless we close the Erase Data by Browsing window. (Update 34553)
Add Snap Protect support for Equallogic Arrays that have a separate interface for management and data.
(Update 34599)
Add multiple Data Readers support for NAS Subclients when SNAP is Enabled.
Additional Instructions 1. If a dedicated management network interface is configured on Equallogic array, enter the management IP address in "Name" field when adding the array in array management. Otherwise this field should be left blank. The control host field will be used for Data interface as it is used today. (Update 34599)
While creating a new FS subclient, the SnapProtect checkbox in the Snap tab is checked by default.
(Update 34691)
Getting error message when trying to create storage policy using the existing global deduplication storage policy. (Update 34691)
GUI Hangs when Last Sunday Monthly schedule is selected.
(Update 34691)
When Mailbox backup jobs run in parallel, profile recreation fails resulting in job failure.
(Update 34665)
Mailbox backup job fails on particular mailboxes.
(Update 34665)
Mailbox backup job crashes while logging stream property data
(Update 34665)
Folder move in a mailbox results in data not getting backed up in the new folder for incremental jobs.
(Update 34665)
The conversation chain of the backed up messages in Outlook 2010 may not remain intact after restore.
(Update 34665)
Archive from PST and Restore to PST may fail with errors opening folders.
(Update 34665)
Mailbox backup may exit while processing Deleted Item Retention
Additional Instructions **Note, job specific profiles are not created by default with this update. To enable job specific profiles, create the following registry key
Name: CreateProcessSpecificProfile
Type: DWORD
Location: \MSExchangeMBAgent or \MSExchangeDMAgent or \ExchangeArchiver
Value: 1 to enable, 0 to disable job specific profiles
**Note, after installing this patch a full backup is required to be run for Exchange Mailbox iDA. (Update 34665)
Enhancement for Dell disk array configuration. (Update 30698)
Enhancement to create GPT partition for Dell disk array configuration. (Update 31089)
When CS and MA are different machines, Tape Catalog job may cause a CVMountd crash.
(Update 33361)
Robo offline source CS import via MA may fail to copy dumps to GRC cell. (Update 33361)
NAS Client creation may fail after de-configuring and hard deleting the NAS agent once. (Update 33774)
NAS Client creation may fail after de-configuring and hard deleting the NAS agent once. (Update 34011)
The tape driver may return an error "The process cannot access the file because it is being used by another process" while reading the chunks from the tape.
(Update 34236)
Catalog job may hang trying to acquire lock on tape device.
(Update 34236)
Catalog job may crash when the catalog database files are open.
Additional Instructions To disable scsi2 reservation, create DWORD bDisableScsi2Reservation under MediaAgent section of registry. The value of this DWORD does not matter. (Update 34236)
When deconfiguring Disk Device in the Library and Drive Config Tool, the Event Manager Service on CommServe may become unresponsive. (Update 34615)
Enhancement for Dell disk array configuration. (Update 34646)
Updates installed from a Service Pack might get displayed as "Additional Updates" in CommCell Console
(Update 31210)
When a service pack with minor version is installed on CommServe, update version information of CommServe node reports missing service pack for database packages. (Update 33323)
Service restart on client might falsely show missing updates for SP1a in CommCell Console. (Update 33554)
New registry key on the client to indicate whether there are updates available for install. (Update 33941)
Enhancement to add a Web Interface for Laptop Backups (Update 34139)
Viewing SRM billable entities and cost categories requires CommCell-wide viewing rights (Update 34211)
Change of default tunable parameters for SQL agent to improve the performance. (Update 34293)
Install Software for Unix clients was not installing updates that were part of the DVD
(Update 34317)
New registry key on the client to indicate whether there are updates available for install. (Update 34317)
Evmgrs may crashes on CS when creating a new subclient or update existing subclient. (Update 34322)
Backupset configuration may get deleted when the oracle instance properties are modified.
(Update 34349)
Increasing timeout duration for install software operations from CommCell Console. (Update 34354)
Restore Enhancements for VMware.
(Update 34363)
Increasing timeout duration for remote cache operations and for copy software jobs. (Update 34365)
Enhancement for Firewall Configuration checkbox at client group level. (Update 34467)
Deconfigured clients may be visible in schedule policy association edit tab
(Update 34467)
Support for Non-Interactive Restore recovery for Windows. (Update 34512)
Media Agents goes offline intermittently due to registry permission issues. (Update 34542)
MA side deduplication option is not saving at instance window for SAP Maxdb and Informix (Update 34575)
Setting Cache Status to Invalid before performing SyncUp on remote software cache.
(Update 34575)
Unix Time Stamps are not shown in the Add/Remove Software Configuration window.
(Update 34575)
Download Software with only Sync option selected setting the CommServe cache status to invalid. (Update 34575)
Update to enable file level restores from Linux guest VM backup to a Linux client with Image iDA installed. (Update 34575)
One Touch Recovery for Linux failing with error:
*** Received CommServe Software Install Manager Error 67109493 :
*** Failed in Install Requirement phase for [UNIX File System iDataAgent]
*** package. Please check Commserve log files for more information.
*** Setup Failed due to the above error.
(Update 34575)
Restore or Auxiliary copy job may go to pending with JPR: "Undefined software error occurred" due to some files not being retrieved by the SILO Recovery job. (Update 34531)
After upgrading the Windows operating system of a CommServe, the new operating system is not displayed in the CommCell Console. (Update 33894)
After applying update 33894 on a CommServe, the restart of CVD would set the Software Cache state to invalid.
Client side Operating System synchronization was happening on every CVD restart, instead of when there were changes. (Update 34046)
Deconfigured virtual machine clients may appear as configured if they are part of the VSA backup.
(Update 34072)
Installed Agnets from releases older than 9.0 may get deconfigured and upgraded in the database if the client is part of VSA backup. Additional Instructions None (Update 34072)
Enhancements to the wild card content functionality for file system agents (Update 34403)
Support to display of Web console URL. (Update 34529)
Generate Job Backup Summary Report on a setup for DB2 Client. The log details field contains wrong Log End Time value.
(Update 34234)
In Backup Job Summary report, for each VM, columns Size of Application, Data Written, Data Size Change, Data Transferred on Network, Transfer Time, Throughput, Protected objects, Failed folders, Failed objects show the data related to entire job now to each specific VM. (Update 34313)
Restore Job Summary report job goes into pending state with the reason 'Loss of control process scheduleReport.exe' when the Failed/Successful objects selected and XML is chosen as output format.
(Update 34313)
Further prerequisites for supporting auxiliary copies of commcell migrated data - part 3
(Update 34511)
Tape catalog marks assigned media as scratch media after catalog.
(Update 34511)
CVLibraryOperation.exe may crash with a certain update configuration. (Update 34511)
Restore or Auxiliary copy from a copy with DeDuplication enabled may fail to decrypt data.
(Update 33576)
To-be-copied jobs may be disabled incorrectly when user changes the source copy selection or "Backup on and after" date in the copy properties.
(Update 33576)
Some jobs may be shown as "Partial" after fully copied from a DeDuplication enabled copy.
(Update 33576)
Auxiliary Copy and Restore may fail to read encrypted deduplicated data of synthetic full job from a client with 8.0 version of the software.
(Update 33895)
Support auxiliary copies of commcell migrated data. Additional Instructions Note - this requires the three prerequisite updates also in order to
CCMAuxCopyIssue (32669), CCMAuxCopyIssue-2 (32724) and AuxCopyAfterCCM-PreReq3.
Additionally a regkey needs to be set that Commvault Support should be contacted about.
(Update 34493)
DeDup Reconstruction job may stay running in Prune Records phase for a long time even though a failure has occurred on the MediaAgent.
(Update 33799)
Release Reservation operation from the GUI may cause Event Manager service to crash on the CommServe.
(Update 33799)
Backup or Auxiliary Copy jobs may go to waiting with JPR: "There are no more spares" when the usable active media was last used by an auxiliary copy job.
(Update 34044)
DAG member server discovery failed for multi-domains configuration during a DAG client creation. (Update 31634)
Exchange Subclient loses its contents during discovery phase of backup Additional Instructions Database discovery was protected from re-accessing by this update. There's only one backup job on a single client could conduct database discovery at the same time. When one job is discovering, the other job which is going to discover must wait for the first job finishing its discovery. The wait time could be configured through the following registry key:
Name: DiscoverWaitTime
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\InstanceXXX\MSExchangeDBAgent
Type: DWORD
Value: Seconds
Default Value: 300(seconds) (Update 31931)
Can not discover the databases after the DAG client is configured. (Update 32684)
Exchange DAG backup is in pending status due to subclient content being removed. (Update 32992)
Exchange 2010 DAG backups go pending at 0% after applying ML11.
(Update 33494)
Exchange CCR backup on passive node crash. (Update 33494)
DAG Backup may fail if the combined hostnames are too long (Update 34297)
Exchange database backup does not end promptly when the job fails. (Update 34382)
Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get array info. Please enter array info from Array Management"
(Update 32046)
Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server."
(Update 32290)
Virtual Server iDA Snap Backup job fails with EMC Symmetrix Disk-Array with the error "Failed to get device list from ESX Server."
(Update 32449)
Snapprotect should pick pre-established bcv mirrors and incrementally establish before splitting the bcv
(Update 32814)
Registry hook to use pre-masked devices during mounting and leave them masked during unmounting for EMC symmetrix Additional Instructions On proxy machine registry key "nDisableConfigChange" when present under "iDataAgent" and set to 1 uses pre masked BCV for mounting.
(Update 32814)
Snap backups would fail when symmetrix device numbers for source disks exceeds 999 (Update 32903)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33137)
Sometimes discovery process is failing during processing magnetic libraries list (Update 33205)
Mount for raw device may fail on AIX and Sun due to conversion. (Update 33253)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect.
(Update 33283)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33624)
Restore from NAS auxilliary copy may fail with "no more chunks in last archive file, ending restore." (Update 33725)
GUI Mounts for Primary snaps of NAS IDA may failing with "unable to assign CIFS access to a volume" (Update 33989)
Support SnapProtect for VMAX Symmetrix Array. (Update 34092)
Auxilliary copy for NAS direct attach tape drives using hardware encryption fails with an error reading from the source tape.
(Update 34179)
Default provisioning policy in the Provisioning tab for SP copy properties needs to be removed and Sna-RAID-DP to be selected by default.
(Update 34215)
While New Snapshot copy creation, the source copy panel is disable and nothing is selected. This doesn't let the user save any changes to the copy. (Update 34215)
If user changes Catalog Profile settings on media agent properties, the user should be warned about copying existed indices to the index cache server. (Update 34341)
Enhancement (Update 34351)
Restore Enhancements for VMware.
(Update 34351)
Changed text to "Default time range for Outlook Add-In Find and Recover" in Browse Recovery Options dialog in Control Panel (Update 34351)
Commcell firewall configuration may get reset when properties are changed
(Update 34351)
Allow Custom Package / Record Mode to have blank or missing ports.
Remove port dialog from Instance001 install.
Silent install support for new instances using blank ports and install directory
(Update 34226)
Configuring firewall after initial installation and then installing additional platforms was failing. (Update 34332)
Schedule start date may change after upgrade (Update 33392)
Report ownership may get changed to admin after upgrade (Update 33528)
After upgrading to 9.0, Monthly schedules may have the wrong run day and schedule policies with exchange DB agents may have their schedules converted from full to pre-select.
(Update 33887)
Weekly schedules set to run every other week may skip the first run time.
(Update 33887)
Aux Copy schedules with 'Use Maximum Streams' option actually run with one stream after upgrade.
(Update 33887)
Restore restart change for VMware
(Update 33933)
SQL Server out of place restore may fail when running from upgraded schedules. (Update 34005)
* Error 'Job results directory not accessible' happens when running backup job summary report is run on an Exchange DAG client with Failed Objects option is selected.
* Fix for cvMountd crash in Aix MA
(Update 34016)
Archiver fails in Stubbing phase. (Update 34099)
Active Directory browse fails to show items after running synthetic full. (Update 34151)
Schedule jobs may not start for some clients after modifying a schedule policy (Update 34159)
Restore support from snap mirror and snap vault copies for Oracle and SAP/Oracle.
(Update 34327)
Support for switch database mode GUI option for Oracle snap restores
(Update 34327)
SAP restore Job progress fix for multi-stream restores
(Update 34327)
Scrolling through items in Legal hold fails
(Update 31848)
This update contains the following changes:
(Update 34303)
Optimizes the processing of large number of items from searches performed using content director policy to perform operations like Restore to review set and Legal Hold
(Update 34303)
New feature to display information grouped by FilePath and Custodian for review set and legal hold.
(Update 34303)
New feature to display filters for a review set and legal hold to filter by File Path and Custodian.
Additional Instructions IMPORTANT: FormID:9733 SHOULD BE INSTALLED BEFORE THIS UPDATE IS INSTALLED
(Update 34303)
This update contains the following changes:
(Update 34301)
Optimizes the processing of large number of items from searches performed using content director policy to perform operations like Restore to review set and Legal Hold
(Update 34301)
New feature to display information grouped by FilePath and Custodian for review set and legal hold.
(Update 34301)
New feature to display filters for a review set and legal hold to filter by File Path and Custodian. (Update 34301)
Install Updates from CS level does not contain clients that are in the restore only/released state (Update 33847)
SAP Oracle and Oracle: Open DB is ignored in case of Partial restores
SAP Oracle:For Control file only restore does not need Data or Log to be selected.
Oracle RAC: Atleaset one instance for restore needs to be selected by entering non-zero value for Streams (Update 33922)
Unable to create SRM Reports Schedule Policy due to "Invalid Schedule Pattern" error. (Update 34062)
Laptop Backup Web UI (Update 34141)
Job controller not refreshing in Commcell Console (Update 34209)
Enhancement to add a link on the Capacity screen to point to Books Online license administration. (Update 34238)
"Next Job On" column shows incorrect value for automatic schedules and schedule policies (Update 34252)
Enhancement to default SQL agent settings for higher performance (Update 34266)
Enhancement to optionally skip catalog phase for snap backup
(Update 34266)
Script to update or insert values in webserver Settings table Additional Instructions To update/insert setting value,
> qoperation execscript -dbn DM2 -c 'client Name' -sn UpdateSettingValue -si 'setting name' -si 'setting value'
'client Name' -- client name of the Webserver machine
'setting name' -- Name of setting which needs to be inserted or updated
'setting value' -- value to be assigned for the above settingName
Example:
To update the commclientName setting value below is the command
qoperation execscript -dbn DM2 -c 'WebServerMachineName' -sn UpdateSettingValue -si 'CommClientName' -si 'Machine Name'
'Machine Name' -- Machine name found in the registry under
[HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\Machines] (Update 34189)
Allow job management from mobile devices. (Update 32271)
Web server cache may run out of disc space if content directory policy with legal hold option selected is run frequently causing failure in restore operation. Additional Instructions In order to enable the pruning of files produced by Content Director policy with Legal Hold option, the following registry key is required under the "DM2WebSearchServer" section
Registry Key:"sPrunePolicyItems" (Update 33654)
Show new search engine name in the web console when search engine is reinstalled on the same machine
(Update 33761)
Enhancement to add a Web Interface for Laptop Backups (Update 34129)
DASH Network-optimized Auxiliary copy job may fail with JPR: "Unable to send the stop data transfer control message to the tail" when MediaAgent has "Optimize for concurrent LAN backups" option enabled and Encryption is enabled on the secondary copy.
(Update 34050)
Backup jobs with Client-side Deduplication enabled may run with slow throughput if client-side disk cache is not selected.
(Update 34050)
Backup jobs with Client-side Deduplication may fail if client is behind a firewall. (Update 34050)
Enhancement to add a Web Interface for Laptop Backups (Update 34114)
Snap Protect jobs may fail with the error "Snap Backup failed to start because license is not configured for client [xxx]." even though snap managment licenses are present.
(Update 33994)
Support extending the expiration date of a leased commserve. (Update 34075)
Backup may fail with error "Snap Backup failed to start because license is not configured for client" even if the Snap Backup option has been turned OFF from client properties
(Update 34087)
Invalid bin log (data) path specified in Instance creation causes data loss. (Update 30931)
Oracle backup fails intermittently on Windows server (Update 31940)
Received Time show 1970-1-1 8:00:00 in web search GUI when displaying notes mail (Update 32241)
Received Time show 1970-1-1 8:00:00 in web search GUI when displaying notes mail (Update 32357)
The content Indexing Job may fail for some mail messages with "Failed to get the matching end of file for archive file"
(Update 33234)
A backup job may go to a pending state if an error occurs during enumeration of hard links. (Update 33525)
Unnecessary persistent recoveries are kicked off on cluster Domino nodes.
CvlnDMHook log not getting rolled over. Additional Instructions Domino server need to be restarted after applying the update.
Registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\AvoidInvalidRecalls" needs to be set to prevent persistent recoveries during stubbing. Valid values for this key are 0 or 1.
An optional registry Key "Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\StubbingDelay" defines time in seconds, after stubbing, during which persistent recoveries will not be allowed. Absence of this key will default the value to 120 seconds (2 minutes).
This update contains logs rollover functionality along with the resolution to prevent unnecessary persistent recovery.
Following are the registry keys for configuring log roll over:
"Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\LogFileSize"
Defines size in MB. (For eg, if user set its value to 10, maximum size of log file will be 10MB). If key is not present the size will default to 5 MB.
"Software\CommVault Systems\Galaxy\Instance001\LotusNotesDMAgent\NumLogFiles"
Defines number of files to keep for roll over (History). Absence of key defaults this number to 5.
With the default values of the keys, system will maintain a total of 25 MB size of logs. The log files will have "_n" appended to the original file name with cvlnDMHook.log_1 being the latest rolled over log file.
All the above-mentioned registry keys are DWORD values.
For Unix platforms, log roll over registry keys are following parameters in notes.ini file:
CvLogFileSize and CvNumLogFiles. Behavior and valid values for these parameters are same as above mentioned Windows registry values. (Update 33531)
Search for legally held emails using email properties like to,cc etc.. don't get the required results. (Update 33591)
Using "MigrationExclusionList" registry entry for message class exclusions is not honoring the setting. (Update 33666)
Mailbox agent incremental performance enhancement with NO Data Classification. (Update 34015)
Addresses intermittent crashes during backup and archiving operation on some Windows agents. (Update 34078)
Backup or Auxiliary Copy jobs may go to waiting with JPR: "There are no more spares" when the usable active media was last used by an auxiliary copy job.
(Update 34055)
Job Delay Reason error code hyperlink to point to correct mini brand (Update 33824)
Commcell console does not allow selection of restore only exchange MB agents
(Update 33856)
Schedule are wrong when exception of "WeekDays" or "Days" are added to weekly schedule. (Update 33891)
Deconfigured Clients are still visible even when we select "Hide Deconfigured Clients" option from the Control Panel->UserPreferences (Update 33936)
"Select item with attachment(s) only" option may not work for public folder archiver
Additional Instructions if the subclient is already created with any rules, clear all the archiving rules before applying the patch. For the new subclients it will work fine. (Update 33946)
Backup Job Details window shows wrong "VM Backup Level" while Backup job is running (Update 33979)
Out of Place restore from Find Window for LNDOC does not restore the db title and as a result the db could not be opened (Update 33981)
When viewing the Backup history from client or CS Level, the GUI does not refresh properly to display the jobs. (Update 34000)
Enhancement to show the estimated baseline size on Deduplication tab of Storage Policy Copy Properties and on the warning message when sealing the deduplication store.
(Update 34042)
Duplicate resource pools may be shown on the Provisioning tab of the Storage Policy Copy properties dialog.
(Update 34042)
SnapType is always displayed as 'Primary' for vault and mirror in the snap details while viewing the snaps.
(Update 34042)
Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID.
Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. (Update 30822)
Oracle ODI restore will fail over to previous backup.
(Update 34035)
Adding components in Express re-installed BaseClient (Update 33276)
Install existing 32-Bit FileSystem iDA as Web Proxy for Web Server (Update 33276)
Reduced space required in temp for install software Additional Instructions 1. Just FS install (no .Net framework 3.5 should be required) -check required space should be around 500MB
2. CS or DM2WebServer install (.Net Framework should not be installed on the system before this test) - check space should require around 1.5GB (Update 33350)
New utility to configure VSA Instance parameters from command line. (Update 33837)
Support for future IIS versions. (Update 34023)
Limit WebServer role subfeatures during install. (Update 34023)
Job Manager support for NAS Snap protect
(Update 33023)
Login to web console may not work after installing updates (Update 33147)
Commserve upgrade on Express CS may fail with error "license consolidation failed." if the previous applied license key is to change CSID. (Update 33257)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33291)
Support conversion from leased CommServe to regular permanent CommServe.
(Update 33353)
Addition branding changes.
(Update 33353)
Some agent install fails with error "The CommServe license key is corrupted" after a license file with mixed permanent & evaluation license quantity is applied.
(Update 33353)
NetApp license screen shows CommVault.
Additional Instructions To convert a leased CS license to a regular permanent license, users need to apply a new license key with type UPGRADE. (Update 33353)
"Revert to Factory Settings" option for Add/Remove Software Configuration is removing FTP Site information
(Update 33596)
"Revert to Factory Settings" option may cause CommCell Console hang
(Update 33596)
"CommVault Server Event Manager Crashes when choosing Test Mail feature" (Update 33596)
Jobs still run even when CLA license is expired.
(Update 33621)
License application may fail when only Backup buckets are used (Update 33621)
Event message "System has reached over 100 percent of the limit for [Data Protection Enterprise infrastructure] usage" even when no [Data Protection Enterprise infrastructure] capacity is applied. (Update 33753)
Warning during login when capacity license is exceeded
(Update 33839)
If a capacity license family is not in use and the used capacity is the same as the total capacity, then bump up the total capacity by 1. Additional Instructions For full functionality of this update, also install update 33864. (Update 33839)
Commserv upgrade is taking more time if the upgrade is done when the AD Group is unreachable. (Update 33910)
An option to have a check box “Include Capacity Usage” to display the License Capacity Usage information
in the License Summary report.
(Update 34018)
Error Code link in reports point to Commvault Service page for Minibrand Versions. (Update 34018)
CopyToCache might fail to copy updates correctly to CommServe and 1-Touch Server cache, resulting in services not starting after applying updates.
(Update 30851)
Fix for copying servicepack.ini of unix SP (Update 31031)
InstallUpdates will not request for reboot for OEM updates (Update 33220)
Push Install might fail with timeout errors. To avoid this, added registry support for controlling timeout for push-install operations. Additional Instructions DWORD registry "HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\InstanceXXX\UpdateFlags\nPushInstallTimeoutInMin" is used to control timeout duration for push-install operations. Value is interpreted in minutes. Default timeout value is 30 minutes. (Update 33551)
Copying updates/packages from GUI might fail on CommServe cache due to permission issues.
(Update 33569)
Copy software fails to update installer files.
(Update 33569)
Copy Software should not fail for missing Netware servicepack for 9.0.0 (or later) releases (Update 33569)
Japanese messages may not be correct on Install Updates interface (Update 33632)
InstallUpdates should request for reboot only if driver patch is installed and related driver is already installed on the machine.
(Update 33715)
InstallUpdates job from GUI might start installer on client even if all updates from cache are already installed. (Update 33715)
Installation of Laptop package causes Firewall Configuration entries to be deleted. (Update 33518)
Jobmanager may log the following messages when running an aux copy job
(Update 33540)
2170 01/11 14:02:29 905610 ArchiveMgr JMArMgr::getReservationDetails(), The reservation id [13600083] was not found.
(Update 33540)
2170 01/11 14:02:29 905610 Database getReservationDetails returned no info for rcId = 13600083, isPrimaryCopy=1 srcRCId = 13600083 destRCID = 13600083 srcCopyId=90 destCopyId=295
(Update 33540)
Reconstruction DDB job may skip "Add records" phase and directly go to prune records phase in some cases. (Update 33627)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect.
(Update 33696)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33696)
JobManager service may terminate abnormally when SnapProtect job is run for Virtual Server Agent (Update 33754)
Enhancement to disable GUI option of 'Reboot Client' in 'Install Updates' job using a configuration parameter Additional Instructions For full functionality of this update, 33768 must be installed also. (Update 33783)
Documentation link from GUI is updated. (Update 33812)
When WBA jobs are killed the CDR monitor may show incorrect status for the pairs
(Update 33862)
9.0 Lotus Notes agent has only one partition although it was installed with multiple notes partitions. (Update 33886)
When a synthetic full job that qualifies for extended retention was killed, subsequent backup jobs are converting to Full. Additional Instructions After installing the update, to enable the feature where if an extended retention job fails subsequent job is forced to FULL, use the below Qscript.
Note: The value of this option during the time of kill\failure of extended retention job determines the behavior of next job.
Usage :
To enable:
qoperation execscript -sn SetKeyIntoGlobalParamTbl.sql -si JMEnableConvert2FullOnExtendedRetentionJobFailure -si y -si 1
To disable:
qoperation execscript -sn SetKeyIntoGlobalParamTbl.sql -si JMEnableConvert2FullOnExtendedRetentionJobFailure -si n
(Update 33951)
Enhancement to push firewall configuration when modifications are made to the Client group via GUI or through Installs
(Update 33951)
The option "Enable after a Delay" under Activity Control of MySQL iDA does not seem to work.
The backup / restore option keeps showing "disable", the iDA icon color is not changing from "RED" to "GREEN" even after the delay time is passed. Additional Instructions This is an issue for activity control at the iDa level for all iDa's (Update 33938)
Enhancement to allow marking backup files as read only for cloud devices that supports retention locking. Additional Instructions none (Update 31308)
Enhancement to support Dell DX Object Storage Platform and HDS HCP. (Update 31329)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33288)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33303)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33382)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33449)
DASH Auxilliary Copy job may go to pending with job pending reason: Cannot write Multiplexed Data on to a Deduplication enabled library as this operation is not supported.
(Update 33546)
Content Indexing job read failure from a chunk created by a suspended backup job on a Hardware single instance target. (Update 33546)
Prunable data on disk associated with DeDup storage policy may not be removed due to registry lookup failure.
(Update 33906)
When Read Optimized Dash full or Read Optimized DashCopy is configured along with CRC check option, Synthetic full or Auxiliary Copy job may fail with CRC errors.
(Update 33906)
Synthetic full job may go to pending with error "Signature Generation failed" when reading from a deduplication enabled incremental storage policy.
(Update 33906)
Auxiliary copy job may hang with the error "Unable to communicate with Auxiliary Copy process on MediaAgent" when Look Ahead Reader option is enabled.
(Update 33906)
User with Library Administration rights is unable to release reservation on drive due to missing right on Commserver level.
(Update 33223)
Deletion of the source copy for backup copy should not be allowed.
(Update 33649)
Snap jobs deleted from the primary snap copy are still shown as picked for backup copy if the source copy for backup copy is a mirror copy.
(Update 33649)
Allow using the same name for recreating a just deleted storage policy or copy.
(Update 33649)
Snap jobs may be shown as "Partial" on a vault or mirror copy after backup copy and a further auxiliary copy is completed.
(Update 33649)
Deleting a secondary copy should not be allowed when an auxiliary copy job is running for the entire storage policy.
(Update 33649)
Primary snap copy should not be a spool copy if there is no active vault copy and backup copy is not enabled for all backups. (Update 33649)
Login from GRC to Podcell may fail with the error: "Remote Commserv is offline".
(Update 33709)
Copy operation of export dump file from Podcell to intermediary media agent may fail if Podcell and intermediary media agent are not in same network and they communicate with each other using a proxy.
(Update 33709)
Added Japanese translations for Event Messages. (Update 33829)
Enhancement to show the estimated baseline size on Deduplication tab of Storage Policy Copy Properties and on the warning message sealing the deduplication store.
(Update 33902)
When a Deduplication enabled Storage Policy copy is created, the default value of "Do not deduplicate against objects older than" was set incorrectly to the retention of the copy.
(Update 33902)
Special characters in the data cause SRM Data Collection jobs to fail. (Update 32159)
Store additional metadata in index for virtual server agents (Update 33375)
Protected files report show incorrect file size. (Update 33473)
Virtual Server Agent browse may fail when number of volumes in a virtual machine is greater than 20 (Update 33534)
Exchange Mailbox Archiver stub recalls may fail if user's smtp address has a case change in the middle of a cycle. (Update 33642)
Browse fails after upgrading Media agent to 9.0 (Update 33748)
Ability to turn on and off Lemmetization from the Search admin page
Additional Instructions This update will need web client related update to make the setting work from web client admin site. (Update 33808)
Commcell console does not allow selection of restore only exchange MB agents
(Update 33834)
Server side changes for enhanced VSA restores. (Update 33878)
Ability to turn on and off Lemmetization from the Search admin page
Additional Instructions This update will need web client related update to make the setting work from web client admin site. (Update 33803)
Enhancement to disable GUI option of 'Reboot Client' in 'Install Updates' job using a configuration parameter Additional Instructions For full functionality of this update, 33768 must be installed also. (Update 33779)
Advanced options in restore screen not opening since its throwing null pointer exception.
(Update 33665)
Discovery on one subclient was causing content of other subclient to be lost in case the VM is marked for Deletion.
(Update 33665)
Fast version mismatch in CI engine properties. (Update 33665)
Read ahead processes in Advanced Backup Options for Bluearc may not be visible after upgrade to 9.0 (Update 33701)
In License Dialog Capacity Usage tab, add up the Enterprise and Core values to show a Total bar. (Update 33701)
Enhancement to disable GUI option of 'Reboot Client' in 'Install Updates' job using a configuration parameter Additional Instructions For full functionality of this update, 33779 and 33783 must be installed also. (Update 33768)
Snap Protect operations using DataReplicator engine may go pending after the first cluster failover. (Update 30832)
Filtered folder may reappear on destination if data was added to this folder during replication (Update 31048)
Destination free space evaluation prevents replication from continuing when orphan handling is necessary to free sufficient space on the destination for files needing replication. Additional Instructions An optional registry key can be created on the source client to control the behavior of the destination free space evaluation.
Under the "HKLM\SOFTWARE\CommVaultSystems\Galaxy\InstanceNNN\File Replication" key, create the REG_DWORD value:
nDestinationFreeSpaceEvaluation
Set it to 0 to disable the free space evaluation, allowing replication to proceed without regard to any free space check. Set it to 1 (any non-zero value) to enable the free space check (this is the default if the registry key is not present). (Update 32063)
Hyper-V snaps are not deleted when writer goes into a failed state during backup. (Update 32459)
System State backups of Event Logs using VSS writers crash when the 'File' value for any event log under HKLM\SYSTEM\CurrentControlSet\Services\Eventlog is an invalid location. (Update 33451)
0 upgraded CDR clients from 7.0 fail to start. (Update 33663)
High memory usage by CDR service(CvReplication.exe) in certain cases.
(Update 33764)
During update installation CDR service may not gracefully shut down. (Update 33764)
When there are files with extension name more than 20 characters as subclient content, SRM enabled backup may complete successfully, but no data will be shown in subclient summary page. (Update 32322)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33085)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33090)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33252)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33672)
Deletion of the source copy for backup copy should not be allowed.
(Update 33648)
Snap jobs deleted from the primary snap copy are still shown as picked for backup copy if the source copy for backup copy is a mirror copy.
(Update 33648)
Allow using the same name for recreating a just deleted storage policy or copy.
(Update 33648)
Snap jobs may be shown as "Partial" on a vault or mirror copy after backup copy and a further auxiliary copy is completed.
(Update 33648)
Deleting a secondary copy should not be allowed when an auxiliary copy job is running for the entire storage policy.
(Update 33648)
Primary snap copy should not be a spool copy if there is no active vault copy and backup copy is not enabled for all backups. (Update 33648)
Enhancement to be able to control restart settings for snap backups Additional Instructions After installing the update, the restartability settings "File system and Indexing Based (Data Protection)" from GUI -> Control panel -> Job Management -> Job Restarts should be enabled and disabled as a mandatory step. (Update 32549)
Utilize multiple streams during snap backup copy and restore from snap.
(Update 33385)
Jobs deleted from primary copy show data written as 0 bytes
(Update 33468)
Synthetic full restarts from the beginning (Update 33559)
Utilize multiple streams during snap backup copy and restore from snap
(Update 33606)
Fix for exchange DB single pass restore
(Update 33606)
CVD may crash on a busy firewalled setup (Update 30965)
Authentication errors in one SSL tunnel may disrupt connectivity in all other tunnels.
(Update 31459)
sBindToInterface registry setting didn't work with hostnames (only with IPs)
(Update 31459)
Roaming laptops didn't work well if remote host names were resolved to different IPs in different networks
(Update 31459)
Persistent tunnels were prebinding to the wrong IP on roaming laptops (Update 31459)
Log browse across firewalls may hang if SSL is in use
(Update 31785)
CVD trying to do name to IP resolution every second (Update 31785)
Command line window may popup once in a while when CVFWD is trying to re-establish tunnel connections. (Update 31788)
Fix Firewall Configuration when upgrading clients from 8.0 to 9.0 (Update 32142)
Enhancement to better troubleshoot problems: Log all database queries that take more than 10 seconds by default Additional Instructions The 10 second threshold can be changed via a registry key.
DWORD in the Database section: logQueriesThatExceedExecutionTimeSeconds
Set to 0 to disable the logging. Set to the number of seconds to only log queries which take longer than that amount of time.
Default is 10 seconds. (Update 32389)
0 firewalled UNIX clients upgraded to 9.0 may cause timeouts on the CS (Update 32454)
Install directory is not updated in DB after CS rebuild. (Update 32543)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 32893)
Support for network throttling. Additional Instructions The minimum value for throttling is 128kbps. (Update 33585)
Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin. (Update 32732)
0 client upgrade fails if the client has Exchange agent deconfigured but not included for the upgrade. (Update 32913)
Installation fails when the client was already discovered with a different OS during SRM discovery. (Update 33105)
Skip license check on physical node when SnapProtect backup is running on pseudo client.
(Update 33162)
Fix for Content Indexing Server install on 64-bit OS. (Update 33246)
Client Creation fails during the installation. Additional Instructions None (Update 33246)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect.
(Update 33297)
Support to skip answers and continue "Import From Pod Cell" job if the source CS is offline.
(Update 33371)
Import job may fails for network shared import path.
(Update 33371)
When client schedules are merged with force overwrite and schedule already exists in destination, CCM job crashes. GUI shows 'Loss of Control of Process CCMManager.exe'. (Update 33371)
Enhancement to run qcommands on a remote CS behind firewall using the optional parameter for qlogin.
(Update 33399)
Making command line apis thread safe (Update 33399)
This Update fixes the following issues
(Update 31400)
"Copy Software for 1-Touch" job might fail when CommServe cache or remote cache are configured with a network user.
(Update 31400)
"Copy Software for 1-Touch" job might report time out and fail when applying updates to 1-Touch cache takes long time. (Update 31400)
JobManager Service may crash during startup. (Update 31885)
Job Manager support for NAS Snap Protect.
(Update 31885)
Update version information shows [No Updates] even though there are updates installed for clients that are part of a cluster.
Additional Instructions Restart services on the affected clients or wait 24 hours for update version information to be updated after installing this update. (Update 32520)
Download Software using HTTP proxy fails with 'Invalid FTP' error (Update 32520)
Virtual server snapbackup mount operation will fail for restarted snap backup job. (Update 32756)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect
(Update 32869)
Enhancement to mark snap job full for HDS Shadow Image snap Engine if previous job has not been moved to tape.
Additional Instructions This update requires updates 32861, 32864, 32868. Please make sure that required updates are installed already before installing this update. (Update 32869)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33040)
When a service pack with minor version is installed over a client, its version properties does not show correct service pack information.
(Update 33219)
At CommCell level, update status show the machine name.
(Update 33219)
When update status is 'has diagnostic updates', it doesn't list diagnostic update names. (Update 33219)
Added progress support for virtualServer Agent SnapBackup. Additional Instructions VirtualServer Agent SnapBackup job progress is not getting updated (Update 33241)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect
(Update 33316)
The selection periods for the selective aux-copy might get updated erroneously in the database causing failure to select correct jobs for selective aux-copy operations. (Update 33055)
CvMountd may crash if the network is slow (Update 33226)
Utilize multiple streams during restore from Snap and Sanp Backup Copy.
(Update 33314)
Skip Oracle Snap Integrity check on source based on client registry key. Additional Instructions 1) Set registry key sNOSNAPINTEGRITYCHECK to Yes under OracleAgent section in registry ti skip snap integrity check. (Update 33314)
Sharepoint Document backup issue while retrieving Time information with specific List Items. (Update 30533)
SharePoint Document Backup using Direct Database Access fails for orphaned web.
(Update 31039)
SharePoint Document restored incorrect values if user columns did not have values.
(Update 31039)
SharePoint Document fails to restore 'Content Approval' setting on list/library and the items are restored with 'pending' status from backup using Direct Database Access.
(Update 31039)
SharePoint Document restores for a Blog site PRE/POST-restore of Comments are not mapped with correct Posts.
(Update 31039)
SharePoint Document level restore issues for item system properties 'Modified By', 'Modified Time', 'Created By', 'Created Time' w/wout Direct Access option. (Update 31039)
SharePoint Document Backup using Direct Database Access fails for items having \ or \n or \r in title.
(Update 31039)
SharePoint Document Backup using Direct Database Access fails to backup the versions of wikipage library.
(Update 31039)
SharePoint Document restore fails to restore custom column that has a same name as of built-in column.
(Update 31039)
SharePoint Document restore does not restore wiki page metadata if it exists already during restores.
(Update 31039)
SharePoint Document restore fails to restore items using FPRPC request for input with trailing semi colon.
(Update 31039)
SharePoint Document backup using Object Model (OM) fails for webmetadata folder with "Out of Memory" exception.
(Update 31039)
SharePoint Document fails to restore values for ‘Assigned To’ or 'Person and Group' columns with ‘Allow Multi Values’ settings.
(Update 31039)
SharePoint Document restore truncated Wiki page content.
(Update 31039)
SharePoint Document level restore failed to bring back 'Modified By', 'Modified Time', 'Created By', 'Created Time' properly.
SharePoint Document IDA restores with backups prior to this update would be set with incorrect time properties ( Modified Time/Created Time), New backup should be run to recover the correct properties. (Update 31344)
SharePoint Archiver Recalls are failing for Non Global Admin users for libraries with option 'Require documents to be checked out before they can be edited?' enabled.
(Update 33042)
SharePoint Document IDA restores are failing to preserve 'Modified By/Created By' settings for users who don't have explicit permissions set on the website.
(Update 33042)
SharePoint Document IDA restore for a site completes with an error on SharePoint root site as "At least one field is not installed corrrectly. Go to the list properties page to delete these fields". Additional Instructions Use the registry key 'bEnableUpdateOfDefaultUserFields', to update default 'User' type Field properties.
Location: SOFTWARE\CommVault Systems\Galaxy\InstanceXXX\(MSSharepointDocAgent or SharePointDM).
Key: bEnableUpdateOfDefaultUserFields
Value: 1 (Update 33042)
Fails to detach databases after Snap Mining backup.
(Update 33310)
SharePoint Document iDataAgent restore on MOSS 2007/2010 fails to restore custom library/items/views. Additional Instructions Update 33525 is required to be install for successful data protection and recovery operation.
Complete full backup after installing this update and prior to any recovery operation. Site Collection features should be activated manually if entire site collection is deleted and restored. Subsite features will be activated during restore if they depend on existing activated site collection features.
(Update 33310)
Sometimes Backup fails when empty password is set on array Additional Instructions This update would allow Blank passwords for Snap Protect arrays (Update 32819)
Data Aging may fail. (Update 32959)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33022)
Support for additional restore options
(Update 33171)
Send log files with E-mail option is selected leaves compressed log file bundles on the CommServer. (Update 33238)
When reports run with "text" as output format, data sizes are being displayed in units (MB/GB) other than bytes. Additional Instructions None (Update 33298)
Enhancement to show Resource Pool information in Copy Properites dialog
(Update 33298)
Enhancement to show Resource Pool information in Media Information Report (Update 33298)
RMAN Syntax fixes for long client names in Oracle 11g Windows (Update 31302)
Log Restore by LSN range fails on HP-UX IA64 (Update 32217)
Oracle Agent always uses single stream to transfer data if only the Flash Recovery Area is selected for the backup.
(Update 32398)
During cross machine restore RMAN Script SBT_LIBRARY parameter has library extension from source instance. Additional Instructions Make sure to select "Files per set" in subclient properties. (Update 32398)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 32936)
SAP datafile restores from Commcell GUI fails
(Update 32962)
SAP archive log restores from Commcell GUI is not allowed when database in the open mode.
(Update 32962)
Oracle Snap Restore fails if incremental tape backup is run after the Snap.
(Update 32962)
Snap revert operation failing on Solaris client when mount point is in root directory. (Update 32962)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33080)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33247)
Enhancement to list all subclients that have DeDup enabled.
Additional Instructions Note: Pleaes close and reopen GUI in order to view the changes that are done using set operations. (Update 33242)
Install from CommCell Console support added for File System iDataAgent with Archiving Enabler
(Update 31524)
Values for job streams and high watermark in the job controller are missing. (Update 32315)
Re-install of DB updates [having install.sqle] from ISO might fail
(Update 32924)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 32999)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33005)
Dyncache fixes
(Update 33157)
If RemoveUpdates job requires reboot, job should fail with appropriate information message in GUI.
(Update 33200)
During uninstall, RemoveUpdates.exe binary should be reverted back if it is diag update, keeping latest version for only numbered updates.
(Update 33200)
Modified Publishform Utility to make it configurable for publishing user forms(.oft files). Additional Instructions This can be specifically useful on a Foreign language setup where Publishform cannot identify the native language. (Update 33164)
Possible excessive use of kernel memory while running system state backups. Additional Instructions Registry entry: nEnableMsInfo, Type is DWORD, Value is irrevelant.
This entry controls whether or not the 1-touch backup calls msinfo32.exe.
If the registry entry IS present then msinfo32.exe will be called during the backup.
If the registry entry is NOT present then msinfo32.exe will NOT be called during the backup.
The DWORD entry should be manually created in the Commvault Systems\Galaxy\Instancexxx\FileSystemAgent key.
(Update 32333)
System state backup of Registry may fail if there is a BCD hive under HKLM other than BCD00000000 (Update 32478)
Fix for CVD service not coming up sometimes. (Update 32701)
Automatic scheduled jobs would not run after failing to get the job status. (Update 32848)
1-Touch recovery modified unattend.txt with duplicate MAC entries when one or more network interface cards are disabled at backup time.
(Update 33049)
Data Classification support for File system SPE.
(Update 33127)
Data Classification service is turned on only when packages that use DC are present.
(Update 33127)
Data Classification scan support for Archiving (FSDM and Add-On Data Archiver).
(Update 33127)
Data Classification support for hard links.
(Update 33127)
Default Change journal configuration size is smaller.
Additional Instructions To initiate re-sizing of the Change Journal, the following Registry entry must be created: ChangeJournalDeleteControl, Type=REG_DWORD. Possible values are 1 (Delete and rebuild at next service start), 2 (Delete and rebuild before next Full backup), and 3 (Delete and rebuild ASAP). This key must be created in the following location if the Change Journal should be re-sized for all NTFS volumes: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instancexxx\Data Classification\Configuration\Default.
If only required on a particular volume, under Configuration in the location above, create a Key with the GUID number of the volume which needs the Change Journal to be re-sized. The default size is 0.5 percent of the total volume size with a minimum of 50MB and a maximum of 1 GB. (Update 33127)
FAST 5.3 Search Engine patch installation (Update 32229)
Installing 1-Touch recovery client with different client name needs enhancement for temporary client name iand backout to prevent database client name change. (Update 32693)
Delete the file ClientGroupNamesFile.txt at the end of install. (Update 32779)
Don't require reboot after installing Web Search Server due to PATH environment variable change. Restart IIS instead. (Update 32809)
Blocking Windows Content Indexing Server and 1-Touch Install from DISC1 and making available only from DISC2 (Update 32932)
In some cases, on Vista or Windows 2008, Windows Installer is incorrectly reporting that core windows services must be shutdown to complete an uninstall/upgrade. This causes unnecessary reboots and failovers in the case of a cluster. (Update 33047)
Added an option in Advanced Options to install 32Bit CI Server for 64-Bit machines without any special registry keys.
(Update 33092)
Branding information changes
(Update 33092)
Install only the required components of IIS to prevent potential security issues.
(Update 33092)
Adding NDMP platform automatically for snapvault and snapmirror.
(Update 33092)
Don't show "Lotus Notes" in min-platform selection screen as it is not supported with SnapProtect.
(Update 33092)
Virtual Server doesn't need IIS, just .NET 3.5. Don't select WCF Activation (which requires IIS) during .NET 3.5 install on Windows 2008 R2
(Update 33092)
Delete GalaxyInstaller\Data registry on the CS after the completion of the push install job (Update 33092)
Local Mount path option is grayed out in Library and Drive Config while configuring Disk Library for Windows MediaAgent. (Update 30327)
Enhancement to add CommCell Console support for Dell DX Object Storage Platform and HDS HCP. (Update 31155)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33013)
When adding a new subclient to a client, schedule policy associations display incorrectly if a schedule policy already in use on the client is selected from the Backup Schedule dialog. (Update 33067)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33077)
Auxcopymanager may crash if the Commserver is very busy and database queries take a long time (one instance where this was seen was when large Commcell migrations were happening at the same time).
(Update 31072)
Auxiliary Copy from a NAS attached tape drive to MediaAgent attached media may go to pending with an error indicating a failure to read a chunk on the media due to a getDestArchiveFileSize error. (Update 31072)
Import from Podcell: In case the destination is unreachable or transfer errors happen, the transfer is attempted again during the next scheduled export.
(Update 31346)
CCM Export might fail when performed with the option 'Export Entities From' set in case the capture happens from a database other than CommServ. The error given in this case in the logs is:
"CommcellMigration:: ccmCaptureDependentClients() - DocumentumSubclient :: getFTIList() failed with error [100]" (Update 31430)
1] When a CCM export/import process is killed/terminated abnormally, the next subsequent CCM jobs will hang at job progress 0% forever (Update 31430)
Force overwrite option for commcell migration of schedule policy may not work
(Update 31474)
Auxcopymanager may crash if the Commserver is very busy and database queries take a long time (one instance where this was seen was when large Commcell migrations were happening at the same time).
(Update 31782)
Jobs may be in a waiting state without resources being allocated after an auxcopy manager crash (see above) (Update 31782)
Prunable data from Replica disk library may not be removed from disk when there's a static-shared disk library also configured in the commcell.
(Update 32082)
Duplicate barcodes may appear in media in library view when export is run caused by two library controllers incorrectly being active at the same time.
(Update 32082)
Backup or Auxiliary Copy jobs may go to waiting with JPR: "There are no more spares" even though there is a usable active media in the library.
(Update 32149)
Active Media may not be marked full even with job option "Mark Media Full on Success" selected.
(Update 32149)
Disk Library setting "Spill and Fill" is not honored when one backup job requires more than one writer.
(Update 32149)
Dedupe Reconstruction job may go Waiting with JPR "The Index Cache for the MediaAgent is disabled" even though the index cache is not used for the job.
(Update 32149)
Media and Library Manager service on the CommServe may crash when one or more Media Agents starts up and updates index cache information.
(Update 32240)
Support exporting and importing client group associations for "import from podcell" job.
(Update 32419)
"Import from podcell" Job may hang when using an intermediary media agent that is down or not responding. (Update 32419)
DeDup DB Reconstruction job may fail in the Prune Records phase if there are invalid chunks to process.
(Update 32798)
Deduplication store with no valid data may not ever be removed from disk after first deletion failure.
(Update 32798)
Enhancement to mark snap job full for HDS Shadow Image snap Engine if previous job has not been moved to tape.
(Update 32861)
Restore of migrated data from a disk library might fail when temporary migration is done with evaluation license in the source commserv and a migration of data from same library is done after a permanent license applied in the source
(Update 32940)
Commcell Migration Import operation may fail to show the mount path mappings in the import wizard GUI if the exported storage policy name has certain special characters
(Update 32940)
Support Commcell Migration in setups where CommServ and SQL installed in different machines
(Update 32940)
Support Commcell Migration of 8.0 clients from 9.0 version CommServ to 8.0 version CommServ Additional Instructions Note: This update requires another update CCMSP2FeaturesAndFixes-2 also to be installed along with this for proper expected functionality.
For the fix to allow usage of commcell migration when the Commserv and SQL Server reside on different machines, the following registry key entries need to be added to the Commserver:
Under: HKEY_LOCAL_MACHINE\SOFTWARE\CommVaultSystems\Galaxy\\CCM
create DWORD -> nEnableRemoteSQLConfig and set it to 1
create string -> sRemoteSQLLocalPath and mention local path of an empty directory in the machine where the SQL is installed
create string -> sRemoteSQLUNCPath and mention an equivalent UNC path of the above path which is accessible from the CommServ machine
Mention the login credentials of the above UNC path in
string values -> sRemoteSQLPathUserName and sRemoteSQLPathPassword respectively.
(Update 32940)
Auxiliary Copy job report does not show certain media information.
(Update 32942)
Job Controller does not show drive/mount paths being used when running DASH copy.
(Update 32942)
Backup jobs may go to waiting due to JPR: "Total number of data transfer operations on the MediaAgent exceeds the maximum allowed value" when there are Data Verification jobs running.
(Update 32942)
Auxiliary copy jobs may not run or goes to pending with JPR: "Loss of control process auxCopyMgr.exe ..." (Update 32942)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33034)
Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) (Update 30958)
Add support for Snap Protect to the NetApp NAS iDA. (Update 31877)
Time based Selective auxiliary copies may copy multiple jobs for a time period in case the jobs on the source copy have a lower retention. (Update 32400)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 33029)
EMC Symmetrix Snap Backup job fails with "Failed to get array info"
Additional Instructions Please have some fake username and password set in array credentials along with this diag update (Update 32656)
Failure while mounting the snapshot of an Oracle database when it is created on a NFS export, from a NetApp Filer,created at two or more levels below the volume root
Level 1 ->/vol/VolumeName/Qtree OR /vol/VolumeName/Dir1
Level 2 or more -> /vol/VolumeName/Qtree/Dir1 OR /vol/VolumeName/Qtree/Dir1/Dir2 OR /vol/VolumeName/Qtree/Dir1/Dir2/...
(Update 32741)
Offline content indexing job for exchange is crashing due to data specific properties.
(Update 32874)
"Unable to get array information" when the SetArrayInfo function is called from Symmetrix Engine for SYM3 & SYM4 even though it has succeeded for SYM4. (Update 32920)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect. (Update 33028)
Some times Cost Category history information in CommServ database has the same cost category information as the last modified Cost Category. (Update 32884)
Services are failed to start with a CommServ IP address mismatch error on DR machine. (Update 32298)
License Usage info is not updated correctly when only Enterprise Capacity licenses are available. (Update 32298)
VSA mining server side changes SIM support for guests with non-default galaxy port. (Update 32584)
During laptop install push firewall configuration for CS and MA when added as part of a client group. (Update 32643)
Commcell Console does not save DeDupe option for Oracle SAP instance (Update 32677)
Subclient Properties like Prepost command gets saved when a job is running for the subclient.
(Update 32705)
Job pending reason for SRM NAS jobs is enhanced to include advice for trouble shooting the problem. Additional Instructions None (Update 32731)
Installation of multiple 8.0 Netware agents to 9.0 CS with unlimited Netware licenses fails. (Update 32786)
Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level.
(Update 32804)
GUI freezes when doing a push firewall from clientgroup level (Update 32804)
Jobs fail with Expired License error if commserve and SQL DB run on a different machines. Additional Instructions 1) install this update
2) use CommserveDisasterRecoveryGUI to apply a CSID license file with IP of CSDB machine as new primary IP
3) start services (Update 32823)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect
(Update 32828)
Enhancement to add support for ROMS license (Update 32828)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect (Update 32868)
Commcell Console may reset the high water mark value to 1 if it is set to more than 1000.
(Update 30566)
Added ability to view the admin job history for tape catalog jobs. (Update 31271)
Saving job history results from commcell console as xls or csv shows commvault.dialog.JobIdRenderer$JobIdClass@1ae13c0 in the job id column
(Update 32380)
FileSystem Agent with File System Archiver driver installed has two job options which are shown on the backupset property dialog. These options are "Preserve File Access Time" and "Check Archive bit during backup". Current setting for these two job options is to always default them to on, when classical scan is selected. Changing this behavior such that user can now edit these options. (Update 32436)
Enable “Archive Files per BFS” when “Protect Backup Recovery Area” or “Backup ArchiveLog” is selected. (Update 32577)
Instance properties dialog for SAP for Oracle iDA may not come up in GUI. (Update 32586)
Cancel button on login page when SSO is being attempted may not work
(Update 32623)
When viewing Job History from the client node level,backup history table columns and values are mismatched. (Update 32671)
Array Credentials dialog does not come up on the instance properties. (Update 32692)
Commcell Console does not retain Job Controller columns selection.
(Update 32708)
Changing client properties may incorrectly reset the property to inherit settings from client group
(Update 32840)
GUI freezes when doing a push firewall from clientgroup level (Update 32840)
Use special icon for the MUSIC,LIBRARIES,PICTURES,DESKTOP,DOCUMENTS and VIDEOS folder in the content browse dialog. (Update 32847)
Enhancement to support Netapp SnapVault and SnapMirror as secondary snap copy for SnapProtect.
(Update 32856)
Enhancement to support ROMS license.
(Update 32856)
Web Console Restore does not return data after Commserver services are recycled.
(Update 32856)
GUI may freeze when you move between Client node and Exchange Compliance Archiver node multiple time. (Update 32856)
CCM Export of data created by the SQL iDataagent may take a very long to complete in case there are a large number of SQL iDataAgent backups to be exported.
(Update 30945)
Commcell import/export may not migrate all corresponding SIDB stores. This may cause restore failures after migration.
(Update 31294)
Commcell Import may fail with database error
"Violation of PRIMARY KEY constraint 'archFileSiloVolume_archFileId_commCellId_siloVolumeId_PK'. Cannot insert duplicate key in object 'dbo.archFileSiloVolume'." (Update 31294)
CCM Merge of mount paths belonging to the same commcell (such as those coming in after merging data after a restore to a DR set) may be merged as new mount paths even when they already exist in destination. (Update 32111)
Restore of migrated data from a disk library may fail when temporary migration is done with evaluation license in the source commserv and a migration of data from same library is done after a permanent license applied in the source
(Update 32817)
Commcell Migration Import operation may fail to show the mount path mappings in the Import wizard GUI if the exported storage policy name has certain special characters
(Update 32817)
Support Commcell Migration in setups where CommServ and SQL are installed on different machines
(Update 32817)
Support Commcell Migration of 8.0 clients from 9.0 version CommServ to 8.0 version CommServ Additional Instructions Note: This update requires another update CCMSP2FeaturesAndFixes-1 also to be installed along with this for proper expected functionality (Update 32817)
Prevent export location to be deleted if it is used by schedules.
(Update 32183)
Library and Drive report is displaying "(0.00%)" under "Space Occupied". (Update 32183)
"Import from Podcell" does not work across a firewall.
Additional Instructions Note: Requires additional updates:
1. GUI Update form #08637
2. Qsdk update form #08711 (Update 32354)
License summary report on Express CS with Capacity license is not formated properly (Update 32383)
Unable to delete shared catalog information from the control panel. (Update 32383)
Users not able to do wild card character searches in LDAP when creating SRM policies or push install to clients. (Update 32530)
Job Schedule report does not list the Schedule Policy created for a client group which was selected in the report selection criteria. (Update 32613)
osc_config.xml file under the job results folder is not included in Send Log files zip bundle. (Update 32651)
In backup job summary report when failed objects are selected to be displayed there are client names listed with no failed items list for jobs that have no failed items. (Update 32772)
GUI may cause an exception while browsing the commnet node after performing an "import from pod cell" operation
(Update 32224)
GUI may cause an exception when launching "commcell export" after performing an "import from pod cell" in case deconfigured clients exist that are hidden.
(Update 32224)
More clear default schedule name for "Import from podcell" import schedules.
(Update 32224)
Import from Podcell: Enhancement to work across a firewall
Additional Instructions To use "Import from Podcell" across a firewall, first add the Commserve as a new client by right clicking the client node and adding the Commserve. Then configure the firewall settings for that Commserve client.
In the "Import from Podcell" screeen, choose the new third option where a client can be selected. Choose the client name of the Commserve.
Note: This also requires updates: TO BE ADDED!!!!! (Update 32224)
"Find and Recover" from Outlook Add-In not working if the client date format is in a non US locale, User will get Application init error popup message box and find and recover window will not launch (Update 32531)
Reboot option for Remove Updates is not supported and should be disabled
(Update 32594)
De-Configured client do not show up in client group if the "Hide De-Configured Clients" is selected. (Update 32595)
Enable Find via Web Client (Update 32595)
Unix Lotus Notes find and restore of mails are failing (Update 32646)
When we try to create a schedule using French GUI, OK button is not clickable. (Update 32736)
Subclient level data not getting updated when instance info of username/password/vcenter name is changed.
(Update 32762)
Browse For Datastore says "Password Cannot Be Empty"
(Update 32762)
"Find and Recover" from Outlook Add-In not working if the client date format is in a non US locale, User will get Application init error popup message box and find and recover window will not launch (Update 32762)
Enhancement for Vault Tracker when using export policy: Expired or bad media won't be returned if these media status are not selected.
(Update 30588)
CommNet Media Prediction report may incorrectly report larger number of tapes freed than actual.
(Update 30686)
Datapath on a Global DeDup Policy is incorrectly allowed to be deleted even though there is data associated.
(Update 30735)
Enhancement to support Dell DX Object Storage Platform and HDS HCP.
Additional Instructions Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data.
Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file.
(Update 31145)
Silo disk space management may not free disk space correctly when there are multiple mount paths or libraries in the storage policy copy. (Update 31595)
Support auxiliary copy of Commcell migrated data - part 2 Additional Instructions All parts are needed to support auxiliary copy of commcell migrated data. (Update 32724)
Support auxiliary copy of Commcell migrated data - part 1 Additional Instructions All parts are needed to support auxiliary copy of commcell migrated data. (Update 32669)
- CS events added through update may not be get loaded in CS DB
- Installation of Diagnostic update should fail due with timestamp check error (Update 30493)
- When Pending File Rename Operations registry key grows over 1024 characters, InstallUpdates.exe fails.
- If Requires field in Updates registry grows over 1024 characters, InstallUpdates.exe fails.
- Eula updates may not display expected behavior after installation on 1-touch server
- Removing updates might fail (Update 31062)
1-Touch Updates may not get installed
(Update 31404)
DB updates installation from servicepack may not work correctly (Update 31404)
DM2 web services may not come up on the machine. (Update 31750)
Add support for UpdateRestarter method of closing and restarting Laptop2TaskbarIcon.exe during installation of updates.
(Update 32087)
Used the above method to close the Laptop2TaskbarIcon.exe before installing the updates and to restart it after installing the updates. (Update 32087)
Added support to run the dyncache Installer commands during installing and removing the dyncache update.
(Update 32365)
RemoveUpdates job might crash if the Updates\Updates_Instance.xml file is empty.
(Update 32365)
RemoveUpdates job might fail with incomplete error message if pending reboot registry operations are present in the system.
(Update 32365)
RemoveUpdates not returning the exact status message, returning success/failure only.
(Update 32365)
Files are locked during install\remove because of the processes started from Base folder.
(Update 32365)
If Oracle package is installed on given Simpana setup, interactive InstallUpdates/RemoveUpdates is showing a warning message for stopping Oracle services. (Update 32365)
Name of the current file wasn't shown in backup tray utility on UNIX
(Update 32638)
Total file count was not set on UNIX
(Update 32638)
Final job status was not passed to backup tray utility
(Update 32638)
Reason why new jobs cannot be scheduled was not passed to backup tray utility
(Update 32638)
More information displayed on backup tray utility (Update 32638)
Prunable data on Cloud Library may not be removed due to managed disk space setting incorrectly enabled on the copy.
Additional Instructions Manage Disk Space flag was set when creating cloud Library SP with non infinite retention (Update 31389)
GUI may show incorrect selective copy type in Copy Properties dialog if deduplication is enabled.
(Update 31919)
Restore from a secondary copy which re-encrypts data on an 8.0 MediaAgent may fail with "Failed to decrypt data: wrong decryption key" error.
(Update 31919)
No notification on CommCell when media is exported for Stub recall job.
(Update 32077)
Browse enhancements for exchange mailbox archiver agent to show all stubs within a given time range. (Update 32592)
If user do not have Admin privilege at commcell level then user is not able to set Holiday at client group level.
(Update 32592)
Archiver jobs fails after upgrading CS and MA to 9.0 and when data was erased through Browse prior to upgrade. (Update 32592)
Public Folder Archiver recalls from Exchange 2003 OWA may fail with the error "Failed to get exchange server name"
(Update 31900)
Outlook Add-In may crash when performing Offline Archiving operation with the network cable unplugged.
(Update 32092)
Outlook Add-In option to Add Stubs in Selected Folder to Erase List may not work. (Update 32092)
When using the UIOption 40 or 44 the outlook add-in stops working.
The addin log shows error "CVEAAddIn::OnStartupComplete::Cannot initialize Explorer - 0x80004003" (Update 32310)
Recalls from Outlook Web Access do not work if the home server is inaccessible. Additional Instructions 1. This update introduces an option to use local installation infrastructure on CAS server similar to how Outlook recalls are handled. To enable the option, add the following line under 'appSettings' section in 'web.config' file of OWA,
< add key="CVOWA:UseLocalCASForRecall" value="true" />
2. If this option being enabled, home mailbox server will not participate the recall.
3. In case of an off-host proxy configuration, the Proxy for Exchange setting in client properties must be properly configured on the CAS server where OWA Proxy Enabler is installed. (Update 32317)
Support Auto open from web link based recalls.
(Update 32568)
Web link recalls may fail in a mixed environment of exchange 2007 and exchange 2010.
(Update 32568)
Web link recalls may fail with a Base64 decoding error for some stub messages.
(Update 32568)
OWA recall fails through 'Open another user's inbox' option in case of delegate access on Exchange 2010.
(Update 32568)
Outlook Add-In may crash intermittently on load. Additional Instructions This update must be applied to outlook addin also, otherwise autoopen from outlook addin may fail.
If load balance server is sitting in front of CAS servers to access OWA, the OWA url detected by Exchange AutoDiscover could be an internal OWA url and inaccessible from outside. The following web setting could be used for this case:
File: CommVault\Simpana\cvwebrecall\web.config
Section: appSettings
Setting: < add key="CV:OwaRoot" value="[ValidOwaUrl]" />
[ValidOwaUrl] should be a valid external owa url. e.g. https://mail.sample.com
(Update 32568)
Fix to Create Laptop Backup Client Group (Update 31641)
Block 9.0 Simpana install/upgrade on Windows 2000 clients. (Update 31732)
Fix for push of Firewall Configuration from Client group level where Additional Incoming ports were not correctly pushed. (Update 31949)
Global filters are turned off for all subclients after client is upgraded to 9.0
(Update 32071)
Old storage policy is reverted back for subclients after client is upgraded to 9.0
(Update 32071)
System State flag is turned off after FS agent is upgraded to 9.0
(Update 32071)
Max number of streams is not set correctly (Update 32071)
Option to Enable Deduplication may get reset after upgrading to 9.0. (Update 32393)
Cluster client has global filter & storage policies reset after 9.0 upgrade
(Update 32404)
DB2 agent reinstall may not bring back the instance level storage policies (Update 32404)
File Archiver agent is still greyed out in GUI after agent reinstall
(Update 32404)
SharePoint agent upgrade fails when the agent has modified default backupset name
(Update 32404)
Install Agents for Restore Only fails with license error when no license is available.
(Update 32404)
File System agent installed with configured for laptop backup option has subclient with system State option on.
(Update 32404)
Lotus Notes DB and Doc agents have duplicate instances created after agent upgrade/reinstall
(Update 32404)
Impersonate user account info of Job Results Directory is overwritten after client upgrade
(Update 32404)
Store Updates Locally info is lost after client upgrade
(Update 32404)
After 9.0 upgrade of a CCR Cluster, Exchange Database server name is changed to physical host name causing discovery to fail.
(Update 32404)
Database Auto Discover affinity for Exchange Mailbox and Exchange Mailbox Archiver should not show databases assigned to deleted subclients. (Update 32413)
GUI does not save changes for "Include policy filters" option in Subclient filter properties on client when associated to a subclient policy (Update 32443)
Fix GUI connection reset when trying to open client properties (Update 32489)
Instance level storage policies are lost after DB2 agent is upgraded to 9.0 (Update 32547)
Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level.
(Update 32561)
GUI freezes when doing a push firewall from clientgroup level (Update 32561)
Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level.
(Update 32559)
GUI freezes when doing a push firewall from clientgroup level (Update 32559)
"Find and Recover" from Outlook Add-In not working if the client date format is in a non US locale. , User will get Application init error popup message box and find and recover window will not launch (Update 32533)
Discovered Netbackup exported media are not shown in the media information report (Update 31630)
Support Pre-deployment survey for external data collector. Additional Instructions Refer to online document External Data Connector Pre-Deployment Survey. (Update 31978)
Support for TSM version 6.1.3
(Update 32098)
Fix for Fastpass discovery job running CVForeignHandler.exe module at 100% CPU. (Update 32203)
Exchange MB Backups have failures due to attachments with no content
When archiving a mailbox and PST, subclient filters are applied to only mailbox but not to PSTs (Update 32447)
Vsa snap mining provider and mining changes. (Update 32496)
VADP disk level incremental backups were running slow on disk with large sections of unchanged data. (Update 30623)
NAS iDA backups to a tape drive on a NetApp file server are failing in the archive index phase with an error indicating "an internal software error occurred". Failure happens when using ONTAP 7.3.3 and IPv6 is not configured on the MediaAgent. (Update 31254)
Add-On Data Archiver backups and restores sometimes fail. (Update 31444)
SRM FLA Filters are not working when User Name or Group Name contains spaces.
(Update 31576)
Add-on Archiver [ turbo ] recalls fail when subclient which archived was deleted. (Update 31576)
NAS Backup is failing in round-robin scenario (Update 31665)
Stubbing fails during Add-On Data Archiver incremental job if files were renamed or deleted. (Update 31714)
Recalls on Exchange Mailbox Archiver stubs fail after upgrading CC and MA from 8.0 to 9.0 (Update 31890)
Fix for CVD crash when Virtual Server agent is installed and no instances are configured. (Update 32026)
Index restore crashes during virtual server incremental backups (Update 32034)
Container Restores fails when VMDKs of the VM are in subfolders. (Update 32138)
In case of default install of Red Hat Enterprise Linux (RHEL) 5.4 on a VM, file level restore of certain files restores incorrect data
(Update 32198)
NetApp NAS report "Current file system Usage" now includes Snapshots used space.
NetApp NAS report "Snapshots" includes used space of the snapshot (Update 32259)
Fix for Virtual server iDA point in time restores from snap backups (Update 32329)
Incremental Image level backup goes pending at 80% with error "Loss of control process CVVICollectMetaData.exe"
(Update 32336)
Auxcopy process may crash intermittently when dedup read ahead feature is active (Update 32348)
Vmware snap mounts may fail when multiple FC cards are present. Added ability to override FC port selection. Additional Instructions Use "sPortInfo" registry key under iDataAgent to give selective wwpn number.
Note : sPortInfo key is string type and wwpn must be without ":" charecters. See below example for wwpn
if wwpn is 21:00:00:1b:32:09:7c:48, you should enter 2100001b32097c48 without ":"
(Update 32370)
image level iDA file browse fails on sparc solaris 64 bit media agent (Update 32411)
QScript to enable or disable banner text to be displayed before login Additional Instructions To enanble banner text
qoperation execscript -dbn DM2 -c 'client Name' -sn EnableBannerText -si 'True' -si 'Banner text filePath'
To disable banner text
qoperation execscript -dbn DM2 -c 'client Name' -sn EnableBannerText -si 'False'
'client Name' -- client name of the Webserver machine
'Banner text filePath' -- local file path in the webserver machine which contains the text for the banner to be displayed (Update 32473)
SRM Exchange Physical Devices view shows every physical disk on the machine. Additional Instructions None (Update 31590)
Enhancement to allow end users to browse via Web console (Update 31617)
For the File System backup agent, on the subclient properties window, the File Filters pane on the SRM Options tab may be activated even though the File Level Analytics checkbox is not checked.
(Update 31677)
For the File System backup agent, on the subclient properties window, the File Filter pane on the SRM Options tab for Creation Time works in the opposite way as the File Filter for Modification Time or Access Time.
(Update 31677)
For the File System backup agent, on the subclient properties window, the File Filter pane on the SRM Options tab for User Name or Group Name may not work with spaces.
Additional Instructions None (Update 31677)
1Touch Linux: In response file Configuration screen logged in user is not getting populated it shows as dummy-user. (Update 31692)
Enhancements to support file system browse via Web Console for end users (Update 31744)
Following issues with 1-touch are fixed.
(Update 31967)
Unable to edit "Ethernet Device" properties.
(Update 31967)
Dates are not listed in sorted order. (Update 31967)
Crashing EvMgrS when choosing data paths for SAP MAXDB node. (Update 32072)
For Active Directory iDA, user is unable to select attributes from multiple objects for restore at the same time. (Update 32158)
No way to stop loading What's New in Java Commcell Console if there no no internet connection. (Update 32250)
In Capacity License Usage chart, the percentage shows bogus number when there are 6 or more digits. (Update 32302)
Cannot associate any Security group for "defaultBackupSet" of Virtual Server Agent (Update 32421)
Enhance browse and restore to span across cycles and subclients for Exchange Mailbox Archiver (Update 32468)
Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level.
(Update 32468)
Remove the "Summary "Tab from the Client Comupter groups properties Firewall config tab in GUI.
(Update 32468)
Commcell Lockdown option for clients will show only if client is CS or MA. (Update 32468)
After upgrading to 9.0, schedule policy count may have increased on schedule policies for specific IDAs with only client group association (Update 32410)
NetApp NAS iDA browse for subclient content sometimes does not display the file system - instead displays "There are no items to show in this view" (Update 31858)
Push firewall configuration for CS and MA when client group configuration changes (Update 32165)
Global option to select days to browse from Browse/Search/Recovery option (Update 32299)
Enhancement for VSA restore changes. Support for additional parameters during restore. (Update 32352)
Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level.
(Update 32352)
GUI freezes when doing a push firewall from clientgroup level (Update 32352)
Enhancement for VSA restore changes. Support for additional parameters during restore. (Update 32351)
Opening client properties sheet and saving other client properties overrides the firewall options that client inherits from client group level.
(Update 32351)
GUI freezes when doing a push firewall from clientgroup level (Update 32351)
SRM Windows Agent may not show files in the Stubbed files report. Additional Instructions None (Update 30680)
Exchange mailbox stores that no longer exists appear in the SRM Exchange reports in DAG configuration
(Update 31358)
SRM Exchange cost category for the client shows 1 in summary screen when cost association is not defined for the client.
(Update 31358)
SRM Exchange Integrated Agent: Deleted Exchaneg Database(store) information is missing in Exchange store history report. Additional Instructions None (Update 31358)
The virtual Server Agent's data may not be updated frequently.
SRM Server may consume lot of memory over a period of time.
The subclient property "last collectin time" may not be updated correctly. Additional Instructions None (Update 31548)
Added Korean language support for DR Recovery Tool. (Update 31613)
Windows 2003 MediaAgent cannot create Disklibrary path on a remote share exposed by a Windows 2008 machine. (Update 32053)
This update enables reporting of multipath devices and file system configured on multipath device mapper.
Additional Instructions None (Update 32316)
NetApp NAS report "Current file system Usage" now includes Snapshots used space.
NetApp NAS report "Snapshots" includes used space of the snapshot (Update 32255)
The percent free space rule for stubbing is not being honored.
(Update 31722)
User documents are not getting backed up
(Update 31803)
IFind.exe scan fails with a "Failed to get ApplicationId" error. (Update 31803)
Choosing well-known folder "Documents" does not include subfolders that are reparse points themselves, such as "My Videos", "My Pictures" and "My Music". (Update 31918)
Windows File System backup of shared folders may go into a loop and never complete, backing up extreme amount of data.
(Update 31945)
Windows File System backup jobs may crash during job restarts
(Update 31973)
VSS system state snapshots may be orphaned if a network error occurs during the backup. (Update 31973)
Backup fails when Snapprotect SQL DB on EQL volume when mounted as folder under local disk device. (Update 32011)
Loss of control of process for file systems scan (Update 32039)
Restoring shared folders with UTF8 charset in the folder name doesn't restore them as shared folders. (Update 32125)
Regardless of the instance account specified in the Simpana GUI, SQL operations may not be successful in cases when NT Authority account doesn't have sysadmin role. (Update 32129)
Data Classification scan may not include new content or content that is new because of a filter change in the collect file.
(Update 32254)
User impersonation for UNC path based backup is not working.
(Update 32254)
- HyperV container level restore fails if Network adapter name is in non-english (Korean).
- HyperV container level restore fails when VM configuration contains different network adapter attributes viz. mac_address_is_static, mac_address. (Update 31853)
Optimizations in software snap and Change block tracking for snap moving to tape.
(Update 32000)
- Hyper-V backup skips VHD files during some multi-streamed backup jobs (Update 32038)
Addresses intermittent vsbkp.exe crash at job completion. (Update 32222)
Support for creating NetApp mini brand DVD. (Update 31440)
SQL upgrade would fail from 2005 to 2008 with error message "The current Security Policy setting for 'Minimum password length' is greater than 8 characters" if the password policy requires a password larger than 8 chars, though this is no longer true for SQL 2008 upgrade. (this was true for SQL 2005 upgrade from SQL 2000) (Update 31795)
The installation dialogs when launched from the NetApp OEM DVD showed Installer as the productname (Update 32008)
After upgrading CommServe to 9.0, the CommCell Activity remains disabled. (Update 32041)
Changes to NetApp minibrand dialogs (Update 32185)
0 Build SP1 PostgreSQL iDA----> We should not drop the tables If we check the option (Don't import to server) (Update 31704)
When restore Oracle control file and data and selecting "Reset Database" on restore -> Advanced -> Options tab, the following error message is displayed: "Cannot select both "NO CATALOG" and "Reset Database". (Update 31716)
Enable VSS option not showing on windows 7 32 bit OS (Update 31938)
Unable to do Point-in-time restores between two cycles for SQL agent. (Update 32134)
Change default Archive Rule settings to use "All of the file selection rules are satisfied" instead of "Any" (Update 31622)
Enhancement to allow end users to browse via Web console (Update 31639)
"Lock Down CommCell" option should be disabled on newly created client group. (Update 31672)
"Data Archiver for Files - MS Windows" (FSDM license for Local File System instance) is not consumed when "Enable for Archiving" is selected on winFS properties.
(Update 31727)
Add support for Snap Protect to the NetApp NAS iDA. (Update 31882)
Current Brand ID is getting reset during CVD start up. (Update 31926)
Delete option not available on the non-default backupset for Virtual Server IDA. (Update 31968)
Global option to allow point in time recovery across cycle for SQL. (Update 32066)
When legacy restore is submitted from Web GUI jobID is incremented twice. Also the jobId reported in Web GUI is not the actual jobID of the job. (Update 32050)
DynCache service is not supported anymore starting with Windows 2008 R2. Removing installation of it during MediaAgent. (Update 30951)
Silent install on a WORKGROUP machine may use hostname with incorrect domain name. (Update 31144)
Allow install of SQL iDA on Cluster for multiple cluster groups.
SQL iDA backup issues when SQL agent is uninstalled from a cluster group.
(Update 31455)
Web Search Service now requires Simpana to be in the PATH environmental variable. (Update 31773)
Rollback previous change for installing DynCache service. (Update 31790)
Added TrackDeletedItems registry key for Online Content Indexing. (Update 31896)
Support for latest version of CI server
(Update 31995)
.NET Framework 3.5 installation fails on WOW3264 mode on Windows 2008 R2 machine. (Update 31995)
CVMountImage.exe takes longer time to mount and unmount a wim. (Update 31479)
1-Touch offline support. (Update 31654)
0 Windows system state backup can go pending during onetouch components if the "NUMBER_OF_PROCESSORS" environment variable was not present. (Update 31823)
Search fails with request timeout errors appear intermittently.
(Update 31433)
Search returns results but does not show up in Web Client UI if keyword navigator is returned as part of navigators.
(Update 31433)
User Settings tab does not show the appropriate CI Server name.
(Update 31433)
Navigators are not showing up if CI engine is using fast4.3 during upgrade to ver 9 (Update 31433)
Enhancement to allow end users to browse via Web console
(Update 31532)
If only one client is allowed for a particular user doing browse from web client and it has both file system as well as file system archiver agent, then the client name displayed in browse tree is ambiguous (Update 31625)
Killed Jobs shows incorrect count on mobile job site. (Update 31758)
The Native App Needs to Authenticate the user and get back to native app in case authentication fails (Update 31763)
Search from Web Client results toolbar stops preview from working. (Update 31843)
Scrolling through items in Legal hold fails
(Update 31850)
When eMails belonging to different subclient are selected to perform PST operation, the WebUI will show available for download even before the actual job is completed. (Update 31856)
Deleted review sets should be ignored during upgrade
(Update 31958)
The default tab from the system should be "Email" (Update 31958)
Add support for Snap Protect to the NetApp NAS iDA. (Update 31860)
Add support for Snap Protect to the NetApp NAS iDA. (Update 31875)
When Virtual Server backups of a VM are run through a proxy client, for the jobs that are completed with errors, View failed files shows up empty files list. (Update 31937)
Running AddFWExclusions.bat on 2008 machine doesn't add complete path of the binaries in the base folder in the firewall exclusion list.
(Update 31924)
CVMA or CVFSSnap may crash while running clariion backups.
(Update 30393)
CVMA crashes when the registry key SYMAPI_HOME_DIR is not created in Unix platforms. (Update 30393)
Snap Backup of physical volume of an IBM XIV mapped to a Windows client using only FC card fails.
(Update 30548)
HDS Snap cleanup fails with the error "Replication group not found".
(Update 30583)
Clariion snap and clone jobs do not use the device mapper pseudo device path when Linux native MPIO is installed.
(Update 30644)
Clariion Snap/Clone jobs may go to pending with error "Failed to get device array info from device path" (Update 30644)
Encrypted password is displayed in the events during the snap protect operations for VMware clients (Virtual Server Clients) (Update 30962)
After running SRM Analysis on NDMP client, some of the files with no extension are not reported properly by SRM Reports.
(Update 31212)
During a Nas backup, if the Job Manager service goes down for some reason, nasbackup continues backing up data. nasBackup should detect this condition and fail the backup phase with a relevant pending reason. (Update 31212)
XIV snapshot mount operation on a VM (hosted on ESX server) fails. (Update 31228)
Simultaneous Virtual Server iDA operations taking place from a MediaAgent to the same NetApp file server may fail error indicating “Failure connecting to file server. Please check the connectivity to the file server” if one of the operations involves a mount or unmount on a ESX server that takes too long to complete.
(Update 31409)
Add snap protect support for Oracle or UNIX FS using an NFS export from a NetApp array.
Additional Instructions 1. We do not support NFS exports exported using alias names from the NetApp file server.
For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported.
The export name on the filer should be the same as the storage path on the filer.
eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree
2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume
are supported.
3. Use only the short name for the filer while mounting NFS exports from the filer.
Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name.
(Update 31409)
VmWare backup copy job fails with error "Failed to get device list" while mounting Clariion Disk (Update 31421)
Added snap engine support for LSI OEM Disk Arrays with VMWare. (Update 31472)
NFS snapbackup operation for Vmware may fail in certain cases. (Update 31572)
Enhancement to support VMWare for HDS snap engine (Update 31707)
Snap Protect backup jobs using Dell Equallogic array are failing with error "Failed to create VSS snapshot within the 10 second write inactivity limit."
(Update 31752)
Unable to run successful VSA SnapProtect backups in some cases when the ESX server has huge number of disks. (Update 31868)
Added required support in addition to others for NAS Snap Protect. (Update 31868)
Add support for Snap Protect to the NetApp NAS iDA. (Update 31868)
Unable to send smtp mail if username/password not specified. (Update 30413)
MediaManager service on CommServe becomes unstable and goes down during backups in certain cases. (Update 30613)
Restore jobs of certain versions Oracle and DB2 agents may incorrectly get pre-empted when job is still running.
(Update 30972)
Backup job using Inline copy may go to waiting with JPR: "Storage Policy Copy does not have a data path using the required MediaAgent" when secondary copy has 'Use preferred Datapath' selected in Data Path Configuration.
(Update 31207)
Restore jobs of certain versions Oracle and DB2 agents may incorrectly get pre-empted when job is still running.
Additional Instructions Note: Updates 9.0.0-31124 and 9.0.0-31207 need to install together. (Update 31207)
Enhancement to support Dell DX Object Storage Platform.
(Update 31282)
On Windows 2008 Operating systems, Attempt to browse or saving reports to a network location or Alerts executing applications causes UAC to bring up confirmation dialog. (Update 31481)
Restore may fail with "Failed to get Index Afiles for Restore" error.
(Update 31550)
Some Oracle RMAN backup jobs may not progress due to JPR: "Oracle backup process could not communicate with Commserver to retrieve archive file".
(Update 31550)
Capacity based Licensing fixes:
(Update 31605)
Reset count is reset to 0 only when all usage is below lower threshold.
(Update 31605)
Used capacity in GB is not rounded up.
(Update 31605)
Backup job may fail with JPR "Inline backup is not allowed when it points to a global deduplication policy whose primary copy has client side Deduplication enabled.", when Inline copy is pointing to a global Deduplication storage policy.
(Update 31689)
Jobs may wait a longer time to get resources on a heavily loaded CS when there is an Auxiliary job running with large number of streams.
(Update 31689)
Media Manager service may crash when there are multiple inline copies running at the same time.
(Update 31689)
Partial success DAG Backups are being reported as Completed jobs (Update 30410)
JobManager Service may crash during startup. (Update 30461)
Selective Online Full backup may fail if the number of data streams and log streams are different
(Update 30671)
Backup phase for File System agents will keep restarting after an index related failure.
(Update 30712)
High water mark for Job Activity may get reset to default value in case of a database error (Update 30712)
JobManager should always queue CCM jobs even if the option (ControlPanel->JobManagement->"Queue jobs if other conflicting jobs are active") is not enabled. (Update 30712)
Multiple jobs may fail on busy Commserv with error "Failed to get a response in the timeout period from CVD for process registration". (Update 30874)
Transaction log backups linked to full backups are being retained for Lotus Notes DB and SQL Server agents.
This change will take effect on new jobs only.
Additional Instructions By default transaction log backups won't be linked to full backups. To have the jobs linked, the following registry key must be enabled.
Created in: CommServe
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance
Key: CommServe
Value Type: DWORD
Value Name: JMEnableJobLinkForSQL_LNDB
Valid Data: 0-disabled; 1-enabled (Update 30987)
DDB is getting marked as SILOed even if SILO backup is killed in archive index phase. (Update 31041)
Data protection alert get triggered for all subclients, even if individual subclient is associated in alert configuration.
(Update 31129)
In a client, I’ve five sub clients and I configure single alert associating two of those sub clients.
When I run backup jobs for all the sub clients, my alert mail has info about all the sub clients, even though just two of those sub clients are configured to the alert.
(Update 31129)
Jobmanager may give incorrect event when a database error occurs indicating that a recycle of commserv services may be required when they are not
(Update 31147)
Enhancement to throttle the number of simultaneously running synthetic full jobs
Additional Instructions Add a registry key (JMSynthFullJobHighWaterMark) under commserv registry section and set it's value to 5.
HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\CommServe
Create DWORD JMSynthFullJobHighWaterMark
Set the value to the desired amount (Update 31154)
SILO backup may fail with error "File System agent is not installed on the MA" even when file system is installed.
(Update 31184)
SILO backup may fail in DeDupe DB scan phase when DP MA and SIDB MA are different.
(Update 31184)
SILO backup job may fail with error "^%a The job will not run" when all the volumes for DDB store have already been SILOed.
(Update 31184)
Silo retrieval jobs pending because no valid backup data found. (Update 31312)
Handle memory leak in JobManager when AuxCopy or EDC discover jobs are run. (Update 31312)
Recall fails after turning off archiver if stubs have not been backed up while in turbo mode.
(Update 31585)
After changing storage policy job is converted to FULL.
(Update 31585)
When job is killed in stub phase it should be partially completed.
(Update 31585)
First backup in archiver mode needs to be FULL.
(Update 31585)
SRM Exchange cost category for the client shows 1 in summary screen when cost association is not defined for the client.
Deleted Exchaneg Database(store) information is missing in Exchange store history report. Additional Instructions None (Update 31356)
SRM Exchange Physical Devices view shows every physical disk on the machine. (Update 31583)
SharePoint DataBase restore of Shared Services Povider fails when the Index-Server is last in the path.
(Update 31160)
SharePoint DataBase restore of Web Applications with option "Extend URL" by default will restore Web Application with NTLM authentication provider. Additional Instructions Use DWORD registry value bDoNotUseNTLM set to "1" under HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\MSSharepointDocAgent to restore Web Application with Negotiate (Kerberos) authentication provider. (Update 31160)
SharePoint Database Backup set will support backup and restore of individual sites if DWORD registry value
bSiteExportEnabled is created and set to 1 under HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance001\MSSharepointDocAgent.
This feature enables more granular backup than site collection level backup. All site permissions and all versions are backed up. During Discover operation new Data Type "Site" will be shown. During Browse Backed Up Data “Site” will be shown under "Site Collections" node if last one were also backed up, otherwise, “Site” will be shown under Backup Set node.
During restore operation existing site will be deleted and restored only if option "Overwrite URL" is selected. If site cannot be deleted then content will be merged into existing site.
Note: For out-of-place restores top-level sites can be restored only as top-level sites and subsites can be restored only as subsites. Additional Instructions For Browse Backed Up Data and Restore operations the GUI update which supports SharePoint Database backup and restore of individual sites is required. (Update 31580)
The virtual Server Agent's data may not be updated frequently.
SRM Server may consume lot of memory over a period of time.
The subclient property "last collectin time" may not be updated correctly. Additional Instructions None (Update 31543)
Job Pending reason is not correct when client side dedup backup is attempted to an upgraded 8.0 DDB.
(Update 30438)
Backup might fail when too many jobs are run. (Update 30969)
Enables the "Variable Content Alignment" feature (Update 31327)
SQL transaction log backup may fail with error "The control process for the previous phase is still running. PID []]".
Additional Instructions This update will make the default timeout period as 30 seconds for checking the Liveliness of control process of previous phase.
It can be changed with a registry key "JMProcessLivelinessChkTimeOutSec" under CVD section on the client computer.
(Update 31327)
Verify the connection to vCenter, if the vCenter service is unavailable while running a backup job the job will go pending and resume when vCenter services are available.
(Update 31537)
Virtual Server agent automatic discovery is not honoring the Rule based discovery "Match guest host names by regular expression" to exclude VMs set for "Do Not Backup"
(Update 31537)
Support for Unicode characters for VMware discovery, backup and restores. (Update 31537)
Eliminate delays when backup attempts to fall back to VCBMounter but it is not installed.
(Update 31537)
Lock VMInfo.dll in memory to prevent possible crashes during cleanup phase.
(Update 31537)
Optimize VM query for VM templates and VMs that have not been powered on.
(Update 31537)
Enhancements for correcting VM Guids when duplicates Guids exist in vCenter.
(Update 31537)
Prevent possible crash when VMs with invalid Guids are found in vCenter.
(Update 31537)
Fix for file level metadata collection for movement to tape phase for HyperV.
(Update 31537)
Optimize Simpana client creation from VMs found in vCenter.
(Update 31537)
Collect SRM data for all VMs in vCenter.
(Update 31537)
File scan fails with message "Loss of control Process ifind.exe" (Update 30866)
When file scan can not detect stub as our stub, it allows it to be a candidate for stubbing.
(Update 30940)
When NetApp file gets restub, mod time may change. (Update 30940)
File system System State VSS backups are engaging Exchange writers when installed on Exchange server and errantly quiescing the DB's and truncating logs. (Update 31013)
Recalls may not work when triggered by an 8.0 Network Share Archiver client. (Update 31331)
Search page does not launch within outlook if exchange proxy agent and web server are installed on the same computer
(Update 31425)
Enhanced File System IDA to support archiving.
(Update 31425)
During movement to tape phase, when additional streams are made available to backup then backup may end up releasing some memory twice resulting in unknown failures. (Update 31457)
Data Classifier speed improvements
(Update 31528)
Add on archiver support
(Update 31528)
Laptop2 changes
(Update 31528)
Job management from mobile devices. (Update 31528)
Enhancement to allow end users to browse via Web console
(Update 31528)
The data protected by Online backup for Exchange mailbox agent may be larger than actual data size (Update 31016)
Performance enhancement for Exchange Mailbox Archiver agent. Additional Instructions To enable the performance enhancement for Mailbox Archiver agent, create the following registry key
Name: OptimizeArchiver
Location: \MSExchangeDMAgent
Type: DWORD
Value: Set the value to 1 to enable the functionality.
Notes: When the optimization is enabled, stub pruning feature will change. By default, stubs will only be checked for pruning every 30 days. To change the frequency, create the following registry key.
Name: StubPruneFrequency
Location: \MSExchangeDMAgent
Type: DWORD
Value: Value is xx where xx is the frequency (in days) that stub pruning will run. For example, set to "5" to check for pruning every 5 days. By default if this key is not enabled pruning will be checked every 30 days. (Update 31143)
Profile creation had to be done manually on an Exchange 2010 DAG configuration where multiple mailbox role servers were configured in agent properties, or mailbox role and client access roles were installed on different servers.
Additional Instructions On the client with the Exchange data protection agents, create a new registry key to enable this new functionality
Name: sCASServerName
Type: String
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\InstanceXXX\iDataAgent
Value: hostname of the Client Access Role server to be used for profile recreation (Update 31275)
Enhancement to support recall link, original message body and attachment list together in the stub message body. (Update 31275)
Exchange backup process crashed during a backup operation.
(Update 31275)
Web search of Exchange Complaince archive data with Unicode attachment title shows up as garbled.
(Update 31332)
Exchange backup process crashed during a backup operation.
(Update 31514)
Profile creation had to be done manually on an Exchange 2010 DAG configuration where multiple mailbox role servers were configured in agent properties, or mailbox role and client access roles were installed on different servers.
(Update 31514)
Enhancement to support recall link, original message body and attachment list together in the stub message body.
(Update 31514)
Exchange Compliance Archiver doesn’t archive all messages when the message attachment property isn’t being detected properly.
Additional Instructions For fix #2:
On the client with the Exchange data protection agents, create a new registry key to enable this new functionality
Name: sCASServerName
Type: String
Location: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\InstanceXXX\iDataAgent
Value: hostname of the Client Access Role server to be used for profile recreation (Update 31514)
When the Virtual Server Discovered Client (VM) is selected in the client list from the report selection GUI, the backup job summary report shows that there are no jobs for that client. (Update 30922)
Reports are unable to honor User Capabilities for the User. (Update 31451)
Improved the performance of platform selection window.
Added SRM automatically when CommServer is selected and not selecting CommNet server automatically when CommServe is selected. (Update 30790)
Notify GUI Server Developers: Item [^1%d] missing from cvEncode. should not be visible in GUI. (Update 30845)
Localization fixes (Update 31110)
SRM Server will not be automatically selected when CommServe is selected. (Update 31317)
Fixed message when installing to a newer CommServe version. (Update 31317)
Outlook Add-In SSO may fail if Commserve is on a cluster (Update 31383)
Removed Data Classification package as it is obsolete. (Update 31394)
SRM Exchange DAG Information report is newly added Additional Instructions None (Update 31415)
Virtual Server client group may not appear in GUI. (Update 31438)
Enhancement to allow exchange and sharepoint mining from VSA snaps
(Update 31447)
Support for laptop and desktop backups
Fix for cluster upgrades for missing DB package rows.
Support for Unix Turbo File System (Update 31447)
GUISever support for 1Touch ResponseFile configuration. (Update 31447)
Legal holds will not be displayed after upgrading from version 7.0 to 9.0
Additional Instructions After this update is installed, you need to run DM2DBMigrator.exe from Base folder of Web Server machine if and only if the web server is upgraded already, but you still see a problem in legal hold ownership of AD users.
NOTE that if there is UserGUID mismatch between DM2 database and CommServ database, then the problem of legal hold ownership may persist and need to be solved in case by case basis. (Update 30632)
Search fails with request timeout errors appear intermittently.
(Update 31426)
Search Hit count changes while scrolling
(Update 31426)
Navigators are not showing up if CI engine is using fast4.3 during upgrade to ver 9 Additional Instructions This patch would also require a Web-Client package to be installed. (Update 31426)
Snap protect jobs backing up Windows system state data on Windows 2008 R2 fail.
(Update 30621)
System state registry backup on machines with logged in roaming profile users (ie. Citrix) may fail to back up select profiles.
(Update 30621)
System state backup may crash if the path of the System temp folder contains the characters "%s"
(Update 30621)
Directing MediaAgent index cache to a Universal Naming Convention (UNC) path where User Account Control is on, is no longer inaccessible.
(Update 30837)
OneTouch Windows support for offline restores (Update 31373)
Scheduling of "Review set Activity report" may give error "Please select a webServer".
(Update 30448)
New option in Commcell configuration report to show index cache content information Additional Instructions This update needs to be installed with the update form 07469 (Update 30448)
In subclient properties for the File System agent, SRM Options tab, the File Filters for User Name and Group Name may not work if they have single backslashes. Additional Instructions None (Update 30807)
Under a Unix client, Storage Devices node, Volume Groups in the General section of a single storage device may display incorrect information.
Additional Instructions None (Update 30919)
User name string text change in TSM instance Property dialog (Update 31000)
Remove the exclusive constraint of 'Embed the recall link into body' and 'Leave Behind Message Body' Archiving Rules for Exchange Mailbox Archiver. (Update 31032)
Creation of new subclient for Exchange Database agent does not show available proxies for Snap Protect
(Update 31042)
Exact index option is no longer supported and is removed from the gui
GUI update for SRM support for NAS NDMP Agent. (Update 31149)
GUI update for SRM support for NAS NDMP Agent. (Update 31353)
Install update support for Automatic scheduler
(Update 31353)
Added new Automatic scheduler option "stop task if battery mode begins"
(Update 31353)
Do not show disk space usage option for install update schedule. (Update 31353)
Snap Backup and archiving option for File system cannot be selected together.
(Update 31353)
Data Class Set should be disabled for windows and unix File Systems
(Update 31353)
Enhancement to allow archiving on file system agent
(Update 31353)
Menu option 'Show Folder Sizes' is showing at Virtual Server Agent subclient level. (Update 31353)
Exchange Database restore failing with 'No Backup data' found
(Update 31353)
Add/Remove Software option is missing for Logical Clients (Update 31353)
Gui Changes related to Laptop Backup
(Update 31353)
Ability to add additional subclient content when the client or backupset is associated with subclient policy.
(Update 31353)
Ability to define user specific content such as my documents, my videos, my music to subclient content.
(Update 31353)
Backups might fail for certain iDAs when staging index cache location is enabled. (Update 30354)
PostgreSQL iDA Table level restores are failing (Update 30496)
UpdateIndex might fail with error "Index files are missing. Job could have earlier run on a different MediaAgent possibly due to a failover" when several backup jobs start running simultaneously.
(Update 30833)
Backup job might fail with error "Loss of control process archiveIndex.exe" when several backup jobs start running simultaneously. (Update 30833)
Fix for browse failure when a job fails over between multiple datapaths and Index Cache Server is configured. (Update 31105)
To remove use exact index option and for the system to automatically choose what index to use. (Update 31262)
unable to set "Backup office communication server" checkbox in subclient properties. (Update 30454)
Stubbing rules are not maintained when a new subclient is created for Add-On Data Archiver. (Update 30573)
For SRM Windows File System agent, upgraded client may show incorrect file system usage history. Additional Instructions None (Update 30607)
Virtual Machine summary details are not displayed when reached from either the client node under client groups, or from the client in the client list.
Additional Instructions None (Update 30708)
'Instance Display Name' for TSM instance is not shown on the commcell console.
(Update 30900)
qcreate replicationpair command may cause evmgrs to crash if source path include nested mount points (Update 31067)
Server update for SRM support for NAS NDMP Agent. Additional Instructions None (Update 31225)
Added support to set/get compression properties for all subclients associated to a specified storage policy.
(Update 31215)
The backup job status after a tape Import merge may show "Failed" in "View Content" window . Also the backup job type may show as Tape Catalog job. Additional Instructions Examples:
1. Setting & Getting Compression Properties
To set compression to “On Client” for all sub clients associated to a storage policy.
Qoperation execscript -sn CompressionConfig -si sp=spname -si set -si 0
To set compression to “On Media Agent” for all sub clients associated to a storage policy.
Qoperation execscript -sn CompressionConfig -si sp=spname -si set -si 1
To set compression to "Off" for all sub clients associated to a storage policy.
Qoperation execscript -sn CompressionConfig -si sp=spname -si set -si 2
To get compression of all sub clients associated to a storage policy.
Qoperation execscript -sn CompressionConfig -si sp=spname -si get
To test existing options:-
To set the compression to “On Media Agent” for subclient01 in client01:
Qoperation execscript -sn CompressionConfig -si c=client01 -si s=subclient01 -si set -si 1
To set the compression to “Off” for all subclients in client01:
Qoperation execscript -sn CompressionConfig -si c=client01 –si all -si set -si 2
To set the compression to “On Client” for all subclients in a CommCell
Qoperation execscript -sn CompressionConfig -si all -si all -si set -si 0
To set the compression to "Off" for subclient01 in client01:
Qoperation execscript -sn CompressionConfig -si c=client01 -si s=subclient01 -si set -si 2
To get the compression for subclient01 in client01 - this will provide the compression properties of the subclient as an output in the command console:
Qoperation execscript -sn CompressionConfig -si c=client01 -si s=subclient01 -si get
NOTE:-
Please specify input parameter in single quotes in case of = symbol.
example:-
a. Qoperation execscript -sn CompressionConfig -si 'c=client01' -si 's=subclient01' -si get
b. Qoperation execscript -sn CompressionConfig -si 'sp=spname' -si set -si 2
2. Set next job id counter:
To set next job id counter to nearest 1000 of job id increased by 30 %
Qoperation execscript -sn QS_SetNextJobIdCounter -si 30
If the current next jobid counter is 1500, the job id counter will be increased to 1950 and then be rounded off to next nearest 1000, i.e 2000. (Update 31215)
Fixes CVForeignHandler.exe crash during EDC discovery phase. (Update 30360)
EDC Discovery on 5.1 NBU server (hpux) failed with error "Netbackup services are not running". (Update 30718)
Enhancement to support Snap Protect operations when the LUN is mounted to a mount point instead of a drive letter.
(Update 30736)
Enhancement to support data mining when the source content was located on a mount point instead of a drive letter. (Update 30736)
Sometimes Discovery job fails on machines where date format is different from mm/dd/yyyy or media server is not client on the Master server. Additional Instructions This update MUST be installed along with update 30769.
(Update 30885)
EDC support for IBM TSM (Update 30995)
Integrated install and File System IDA with Unix VERITAS Cluster.
(Update 31209)
Enhanced File System IDA to support archiving.
(Update 31209)
SILO DDB backup fails to backup DDB files. (Update 31209)
Discover job merge failure when XML files are collected with decoupled database capture.
(Update 31209)
Hide TSM admin passwords in logging.
(Update 31209)
JPR for incorrect login/password. (Update 31209)
Unix Netapp NFS Snap protect support
SILO DDB restore fails to restore DDB files. Additional Instructions 1. We do not support NFS exports exported using alias names from the NetApp file server.
For eg: an export such as /ExportName->/vol/Volume/Qtree from the NetApp filer is not supported.
The export name on the filer should be the same as the storage path on the filer.
eg: Export name -> /vol/Volume/Qtree -> /vol/Volume/Qtree
2. Exports both at the root of a NetApp volume and at subdirectory levels below the root of the volume
are supported.
3. Use only the short name for the filer while mounting NFS exports from the filer.
Make sure the filer credentials are entered using its short name. Make sure that the filer is accessible from the source and proxy machine (even if they lie in different domains) using the filer's short name. (Update 31209)
Support for decoupled method of EDC TSM discovery using outputs of TSM commands run. (Update 31209)
CCM - Import may fail when a media export location is migrated and another media export location already exists in the destination commcell with the same name.
(Update 31165)
CCM - Import may fail when SILO data is migrated and the source commcell is on a win32 machine and destination commcell is on a x64 machine or vice versa
(Update 31165)
CCM of Storage Policy Copies using NAS direct-attached data paths on the source will add incompatible data paths in the destination causing backups/restores to fail for these copies (see additional instructions)
Additional Instructions Note: For incoming copies that used to point to NAS direct attached drives, commcell migration will now no longer add a default datapath to the copy.
This has to be done manually after migration. (Update 31165)
New option in Commcell configuration report to show index cache content information Additional Instructions This update needs to be installed with the GUI update form 07496 (Update 30488)
Data Retention Forecast and Compliance report is showing wrong export location for certain media (Update 30488)
Silo Archival job may fail with missing chunk error. Additional Instructions none (Update 30577)
The free space and total capacity of a mountpath in static shared library is reported incorrectly when mountpath is on a UNC share associated to a Win2003 MediaAgent. Additional Instructions To enable the fix in this update, create the following registry DWORD value as described:
On CS, under MediaManager section of registry
DWORD: MMDoNotUpdateSpaceForUNCPath
set the value to 1.
(Update 30610)
Changing mountpath maximum writers value is not saved or fails with error "Failure during update operation on CommServe database."
Additional Instructions To enable the fix in this update, create the following DWORD value under the MediaManager section of the CS registry:
MMDoNotMarkAllVolumeFullWhenSettingMaxWriter.
- Set the value to 1.
(Update 30618)
DeDup DB Reconstruction job may stay in the Prune Records phase for a long time if there are invalid chunks to process.
(Update 30731)
Data size in Silo shown in Storage Policy Copy Properties and Storage Policy Report does not include the size of volumes processed by Silo Disk Cleanup.
(Update 30756)
Size of Dedupe DB is shown incorrectly in the Storage Policy report.
(Update 30756)
New option in Commcell configuration report to show index cache content information Additional Instructions This update needs to be installed with the GUI update form 07496 (Update 30756)
Restore/Auxilliary Copy jobs may not progress when Silo Retrieval job gets interrupted. Additional Instructions none (Update 30856)
Offline Content Indexing job causes Aux Copy process to crash (Update 30992)
When the Virtual Server Discovered Client (VM) is selected in the client list from the report selection GUI, the backup job summary report shows that there are no jobs for that client. (Update 31005)
SILO Archived DDB is not removed from disk.
(Update 31027)
Jobs may fail to query CommServe Version string from Media Agent when CommServe is under heavy load. Additional Instructions none (Update 31027)
Enhancement to support Dell DX Object Storage Platform and HDS HCP.
Additional Instructions Create nCloudMaxSubFileSizeKB DWORD value MediaAgent Section of registry on MA to change default SubFile size to use for Uploading the data.
Create nCloudNumFileReplicaCopies DWORD value MediaAgent Section of registry on MA to change number of Replication copies to keep for Cloud types which has provision for supporting number of replicas for a given file.
(Update 31146)
Capacity License - job should be treated as an AuxCopyEncrypted job even before the job has been copied
(Update 30446)
Capacity License - include Legal hold jobs in archive bucket (Update 30446)
Jobs still run even when eval Capaciy licenses are expired. (Update 30525)
Legal hold jobs are running even though Capacity has been exceeded.
(Update 30551)
DR backup cannot run when Core Backup activity exceeds the capacity license limit.
(Update 30551)
When user goes above limit for all 4 types of capacity licenses, we were allowing all backup jobs to run (Update 30638)
Restore jobs of certain versions Oracle and DB2 agents may incorrectly get pre-empted when job is still running.
(Update 30970)
Enhancements and fixes for supporting Capacity license. (Update 31077)
Backup job using Inline copy may go to waiting with JPR: "Storage Policy Copy does not have a data path using the required MediaAgent" when secondary copy has 'Use preferred Datapath' selected in Data Path Configuration.
(Update 31124)
Restore jobs of certain versions Oracle and DB2 agents may incorrectly get pre-empted when job is still running.
Additional Instructions Note: Updates 9.0.0-31124 and 9.0.0-31207 need to install together. (Update 31124)
Database names with special characters have problems in backup/restore operations.
Additional Instructions 1. We don't support database names containing single quotes. (Update 30902)
MySQL backup goes into pending state (Update 31094)
Express OEM installation of CS fails with a license error.
When user goes under limit for capacity license usage, the reset counters (number of times limit crossed and the time since the last reset) are set to zero. (Update 30377)
Alerts are not sent when only McAfee ePolicy Orchestrator is selected
It works only when Send Alert messages is selected.
(Update 30404)
Some agents have release ID not updated in license table after CS upgrade with DBUpgrade tool. (Update 30418)
EvMgrs logs are filled with this error:
"5080 11d8 08/11 07:21:03 ### EvSecurityMgr::updateAdGroup() - Group[Upgrades - 7.0] no longer exists in Domain[commvault-nj]"
on upgraded Commserver. (Update 30541)
Legal hold jobs are running even though Capacity has been exceeded.
(Update 30556)
DR backup cannot run when Core Backup activity exceeds the capacity license limit.
(Update 30556)
License application may fail on eval CS if NBU clients are migrated from other Eval CS. (Update 30772)
License application may fail when a permanent license key with unlimited agent licenses is applied on an Eval CS with server ID. (Update 30772)
Various capacity licensing features and enhancements (Update 31085)
Single Sign On feature fails when the CS or the Java client (Commcell console) involves Windows 2008/
Windows 7. The user is prompted for credentials explicitly or the Single Sign On hangs. (Update 30979)
Single Sign On feature fails when the CS or the Java client (Commcell console) involves Windows 2008/
Windows 7. The user is prompted for credentials explicitly or the Single Sign On hangs. (Update 31024)
Auxiliary Copy and Restore may fail to read encrypted and deduplicated data of a client with 8.0 version of the software. (Update 30343)
CVD or EvMgrS on CommServer may crash or hang during heavy load.
(Update 30676)
Snap Protect for Exchange Database fails with "Failed to create archive" error.
(Update 30676)
Oracle ControlFile Autobackup deletes backup piece from cloned database backup which has same DBID.
Note:Make sure to install update 9.0.0-30822 along with update 9.0.0-30826 on the Commserve.Only update 9.0.0-30826 is required on the client. (Update 30826)
Unable to recall stub files after deleting the subclient.
(Update 31015)
Silo Archive job goes to pending at DDB Scan phase when there is no data in a sealed store.
(Update 31015)
In certain cases, creation of storage policy pointing to a global deduplication policy fails. (Update 31015)
Differential backup option for MySQL has been removed as it is no longer supported.
(Update 30466)
Full VM Restore fails to get the password if Override default selection option is unchecked for restores to clients earlier than 9.0 (Update 30636)
Browse and restore from client and agent level is not showing appropriate dialog for CDR
(Update 30703)
Virtual Machine summary details are not displayed when reached from either the client node under client groups, or from the client in the client list.
Additional Instructions None (Update 30786)
Changes to Notes DB/DOC/DM configuration may not get saved. (Update 30847)
Exception when clicking on "Advanced" button for EDC discovery (Update 30862)
In Billing Configuration, associating Billing Departments to Virtual Server entities is not saved.
(Update 30910)
Master server Name is not same as EDC Instance Name. (Update 30924)
Sybase subclient may fail to save database if number of selected databases are higher than 150. (Update 30956)
Enhancement to customize the "Recovered Items" folder name during "Find and Recover" operations from Outlook Add-In. (Update 30975)
Corrected sending dependent packages during Upgrade Software for Unix platforms. Fixed the listing of associated clients that require upgrade during Upgrade Software of Media Agent. Install Software now recognizes if updates are missing from the Software Cache or DVD. Install Software now works to clients with custom names. (Update 30507)
Fixed a condition where Install and Uninstall Software could fail without reason. (Update 30763)
Lotus Notes database backup and restore operations may go to pending state on Domino 32bit on 64bit OS. Additional Instructions LNDB* processes will call new process with small memory footprint to communicate with Notes. This feature can be activated by setting the following registry key:
Created in: LN client computer
Windows: HKEY_LOCAL_MACHINE\SOFTWARE\CommVault Systems\Galaxy\Instance\
Key: LotusNotesDBAgent
Value: nUseRemoteCalls
Value Type (Windows only): Dword Value
Valid range: 1 to enable or 0 to disable (Update 30752)
ROMS Agent uninstall fails because it is not uninstalled prior to CommServe Upgrade.
(Update 30364)
Content Indexing Server or 1-Touch installation on new Windows Install is causing Qinstaller crash. (Update 30364)
The index cache path and its account info and job results path and its account info gets ovewritten during CS upgrade/install using existing DB.
Maintenance advantage credentials are also getting overwritten. (Update 30434)
During Web Search Client installation without Web Search Server, the warning "Setup failed to get IIS default website post number" appears on a machine where there is no IIS installed.
(Update 30653)
This update will limit the SRM category computation to regular files. In other words, block or character special files like device files will not be considered in various reports like File Distribution By Size , Time etc. (Update 30634)
Subclient property dialog shows scroll bar on a low resolution screen (Update 30358)
A. When Capacity License is over capacity, the RESET button stays enabled even after clicking it many times.
B. License Usage chart always show "100% Used" in the footer even though the actual usage is over 100%. (Update 30382)
Browse between different Timezone changes the date back a day and an hour. (Update 30457)
Column values for Find results of LN Doc maybe mismatched when some o the values are empty
(Update 30600)
Browse from webUI for emails shows the meta data folder
(Update 30600)
Exception while opening License admin screen after applying capacity based license.
(Update 30600)
Performing Restore after Find from Outlook addin throws exception
(Update 30600)
Find and Recover does not honor client selection in Browse window
(Update 30600)
The banner image for commcell console for Simpana Express is cut off
(Update 30600)
Enhancement for Vault Tracker to not recall aged tape if it's expired using export policy. This is the update to add configuration parameter to enable this change.
(Update 30593)
EvMgrs logs are filled with this error:
"5080 11d8 08/11 07:21:03 ### EvSecurityMgr::updateAdGroup() - Group[Upgrades - 7.0] no longer exists in Domain[commvault-nj]"
on upgraded Commserver. (Update 30537)
Some of the Media Manager Configuration Parameters in Control Panel could not be edited correctly.
Additional Instructions Following are the parameters that got corrected:
Service Configuration:
SIDB Reconstruction prune replay retry count
Data Aging:
Maximum job entries to use for calculation of media retention expire time
Auxillary Copy Configuration:
Time-out (in minutes) for aliveness check
Source signature cache buffer size (in KB)
Source signature cache DB sie (in MB)
Interval (in minutes) to retry a failed stream (Update 30535)
New option in Commcell configuration report to show index cache content information Additional Instructions This update needs to be installed with the GUI update form 07496 (Update 30484)
Data Retention Forecast and Compliance report is showing wrong export location for certain media (Update 30484)
DM2 Upgrade may fail in post upgrade to migrate resultitem XML with transaction log full error with very huge number of rows in DMResultItemInfo table
Additional Instructions None (Update 30483)
DM2 Upgrade may fail in post upgrade to migrate resultitem XML with transaction log full error with very huge number of rows in DMResultItemInfo table
Additional Instructions None (Update 30478)