Go to main contents page    Special conditions for this system

Electrical Conditions

This type of computer should be powered in accordance with the voltage and frequency characteristics indicated in the following tables.

	PERIPHERALS	COMPONENTS OF DPS 9000/9xx
VOLTAGE	Single-phased 230 Volts Tolerances between 207 V and 244 V Three-phased 400 Volts Tolerances between 358 V and 423 V	Single-phased 100 Volts (between Ph and N) Tolerances between 98 V and 132V Three-phased 200 Volts (between Phases) Tolerances between 180 V and 220 V
FREQUENCY	50 Hz ± 1 %	50 or 60 Hz ± 1%

TRANSIENT VOLTAGE	200 Volts ± 15 % for 0.5 sec max./ 10 sec interval
UNBALANCE BETWEEN PHASE	10 V maximum

As all the electronic hardware is equipped with switch-mode power supply technology, account should be taken of the values represented below. These figures should be communicated to the supplier if it is decided to install a power supply interface (DC-AC inverter, isolating transformer, etc.).

POWER FACTOR	0.8
GLOBAL HARMONIC RATE	< 5 %
AVERAGE FORM FACTOR	1.5

Option

Go to main contents page    Special conditions for this system