Select Components for Installation
Install the software directly on the computer hosting the global zone or the Unix Server that you wish to protect. Make sure the computer satisfies the minimum requirements specified in the System Requirements.
Install the software on each of the non-global zones where you have application data.
Verify that the computer in which you wish to install the software satisfies the minimum requirements specified in the following:
It is recommended to install the software on the global zone to protect non-changing or static data on non-global zones. If the data is dynamic or contains application data, install the software on the non-global zone.
Review the following Install Requirements before installing the software:
You can use the Red Hat Package Manager (RPM) package management system to install all Linux versions of the agent. Also, you can use the Advanced Packaging Tool (APT) package management system to install all Debian Linux versions of the agent. For step-by-step instructions, see Base Software Install for RPM Package Manager and Base Software Install for APT Package Manager.
Red Hat Linux will create an entry in the /etc/hosts file when it is first installed, in the following format:
<ip_address> <host name> localhost
For example, if the host name of your computer is bluesky, the entry will look something like this:
192.168.1.111 bluesky localhost
If you have not already done so, edit the /etc/hosts file. The edited entry should look like this:
127.0.0.1 localhost
Depending upon your environment, and using the above example again, you may also need an entry similar to this:
192.168.1.111 bluesky
1. |
If you are installing the software on a global zone or Unix Server, do
the following:
Place the software
installation disc for the Unix platform into the disc drive. You can also install the product using a disc drive mounted on another computer on the network.
|
|
If you are installing the software on a non-global zone, do the
following:
|
||
2. | Read the license agreement. Type y and press Enter to continue. | |
3. |
Enter the number corresponding to the setup task you want to perform. NOTES
|
Please select a setup task you want to perform
from the list below: Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software. 1) Install data protection agents on this computer 2) Advance options 3) Exit this menu Your choice: [1] |
4. |
The product banner and other information is displayed.
Press Enter to continue. |
|
5. |
If your computer is 32-bit, press Enter. If your computer is 64-bit, see Install Unix Agents on 64-bit Platform for step-by-step procedure. |
This machine supports both 32 bit and 64 bit
binaries. By default, we will install 32 bit binary set that has full support for
all the modules included in this package. Please note that 64 bit binary set
currently only support limited modules. 1) All platforms (32 bit) 2) FS and MA only (64 bit) Your choice: [1] |
6. |
This prompt is displayed only when you are installing on HP-UX, Linux, or
Solaris computers.
Press Enter to continue NOTES
|
Certain Calypso packages can be associated
with a virtual IP, or in other words, installed on a "virtual machine" belonging
to some cluster. At any given time the virtual machine's services and IP address
are active on only one of the cluster's servers. The virtual machine can
"fail-over" from one server to another, which includes stopping services and
deactivating IP address on the first server and activating the IP
address/services on the other server.
You now have a choice of performing a regular Calypso install on the physical host or installing Calypso on a virtual machine for operation within a cluster. Most users should select "Install on a physical machine" here. 1) Install on a physical machine 2) Install on a virtual machine 3) Exit Your choice: [1] |
7. |
If you have only one network interface, press Enter to accept the default
network interface name and continue.
If you have multiple network interfaces, enter the number corresponding to the network interface that you wish to use as default, and then press Enter to continue. NOTES
|
Network interface with the following IPs have
been found available on your system.
One of these interfaces should be associated with the physical machine being installed.
It will also
be used by the CommServe to initiate connections to the physical machine. Note that you will
be able to additionally customize Datapipe Interface Pairs used for the backup
data traffic later in the Calypso Java GUI.
Please select the correct network interface
below. Interface number: [1] |
If you have multiple network interfaces, enter the number corresponding to
the network interface that you wish to use as default, and then press Enter
to continue.
NOTES
|
Network interfaces with the following IPs
have been found configured on your system. Please select one to be used by the
CommServe to contact the client. 1) dunk.company.com (480.19.65.333) 2) 480.19.66.326 Interface number: [1] |
|
Verify the default network interface name.
Press Enter to accept the default network interface name and continue,
or NOTES
|
Please verify the physical machine interface name below. Make it as
complete (with fully qualified domain name) as possible:
Physical Machine Host Name: [angel.company.com] |
|
8. |
Specify the client name for the computer.
Press Enter to accept the default name and continue, or |
Please specify the client name for this machine. It does not have to be the network host name: you can enter any word here without spaces. The only requirement is that it must be unique on the CommServe. Physical Machine Client name: [angel] |
Select Components for Installation |
||
9. |
Enter the number corresponding to the CVGxMySQL module. NOTES
Press Enter to continue. |
Install Calypso on
physical machine client.company.com Select the Calypso module that you would like to install
[ ]
1) Media Agent [1301] [CVGxMA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2 |
Base Software Installation |
||
10. |
If you wish to install the agent software for restore only, enter Yes and press
Enter to continue. See
Installing Restore Only Agents for
more information. Otherwise, accept no, press Enter to continue. |
Do you want to use the agents for restore only without consuming licenses? [no] |
11. |
Type the appropriate number to install the latest software scripts
and press Enter to continue. NOTES
|
Installation Scripts Pack provides extra
functions and latest support and fix performed during setup time. Please specify
how you want to get this pack. If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. 1) Download from the software provider website. 2) Use the one in the installation media 3) Use the copy I already have by entering its unix path Your choice: [1] 2 |
12. |
Enter Yes to download and install the latest service packs and post packs from the software provider. NOTES
Press Enter to continue. |
Keep Your Install Up to Date - Latest Service
Pack
Latest Service Pack provides extra functions and latest support and fix for the packages you are going to install. You can download the latest service pack from software provider website. If you decide to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. Do you want to download the latest service pack now? [no] Press <ENTER> to continue ... |
13. |
Specify the location where you want to install the software.
NOTES
Press Enter to accept the default path and continue, or Press Enter again to confirm the path. |
Please specify where you want us to install
Calypso binaries.
It must be a local directory and there should be at least 209MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso". Installation Directory: [/opt] .. Calypso will be installed in /opt/calypso.
|
14. |
Specify the location for the log files.
NOTES
Press Enter to accept the default path and continue, or Press Enter again to confirm the path. |
Please specify where you want to keep
Calypso log files.
It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files". Log Directory: [/var/log] .. Calypso log files will be created in /var/log/calypso/Log_Files. |
15. |
Indicate whether you would like to launch processes with inherent database
access rights.
Press Enter to
assign a new group, or |
Most of Calypso processes run with root
privileges, but some are launched by databases and inherit database access
rights. To make sure that registry and log files can be written to by both kinds
of processes we can either make such files world-writeable or we can grant write
access only to processes belonging to a particular group, e.g. a "calypso" or a "dba"
group.
We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Calypso processes, all temporary and configuration files will be created with -rw-rw-rw permissions. If you're planning to backup Oracle DB you should use "dba" group. Would you like to assign a specific group to Calypso? [yes] |
16. |
If you indicated Yes in the previous step, you will be prompted for
the group name that must be used to launch processes.
Enter the group name and then press Enter to continue. Press Enter again to continue. For installs on a Solaris computer, proceed to the next step. Otherwise, skip to Storage Policy Selection. |
Please enter the name of the group which
will be assigned to all Calypso files and on behalf of which all Calypso processes
will run.
In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here. Group name: dba REMINDER If you are planning to install Calypso
Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make sure to include
Informix, DB2, etc. users into group "dba". |
17. |
Type a network TCP port number for the Communications Service (CVD) and press Enter.
Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter. NOTES
|
Every instance of Calypso should use a unique set of network ports to avoid
interfering with other instances running on the same machine. The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine. Please enter the port numbers. Port Number for CVD : [8600] Port Number for EvMgrC: [8602] |
18. |
If this computer and the CommServe is separated by a firewall, type Yes and then press
Enter to continue.
For firewall options and configuration instructions, see Firewall Configuration and continue with the installation. If you do not wish to configure the firewall services, type No and then press Enter to continue. |
Is there a firewall between this client and the CommServe? [no] |
19. |
Type the name of the CommServe computer and press Enter to continue.
NOTES
|
Please specify hostname of the
CommServe below. Make sure the hostname is fully qualified, resolvable by the
name services configured on this machine. CommServe Host Name: |
20. |
Enter the username and password information for an external
domain user account or a CommCell user account. This authorizes the installation
of an agent on the CommCell.
NOTES
Click Enter to continue. |
Enter your CommCell user name and password: User Name : Password : Press <ENTER> to continue ... |
Kernel Parameters |
||
21. |
Enter the appropriate number of streams, and then press Enter to
continue, or Press Enter to accept the default number of streams and continue. NOTES
This prompt is relevant only when you install/upgrade on a Macintosh or Solaris computer as appropriate. |
Please enter the total number of streams that you plan to run at
the same time. We need to make sure that you have enough semaphores and shared
memory segments configured in /etc/system.
Number of streams: [10] |
22. |
Indicate whether you would like modifications to be made to the
/etc/system configuration file.
Type Yes, and then press Enter to
automatically update the file and continue, or This prompt is displayed only when you install/upgrade on a Solaris (8 or 9) or Macintosh computer. |
We now need to modify the /etc/system configuration file on this
computer. It is done to make sure that there will be enough shared memory and
semaphores available for Calypso programs.
Please review the changes below and answer "yes" if you want us to apply them to the /etc/system file. Otherwise, the installation will proceed, the changes will be saved to some other file, and you will have to apply them manually. set shmsys:shminfo_shmmni=8570 (was 7930) Do you want us to apply these changes now? [no] Changes saved into /etc/system.gal.1744 Press <ENTER> to continue. |
23. |
If you indicated No in the previous step, the file to which the
changes have been saved is displayed. Make sure that these values are established later to ensure that all the requirements for this setup is satisfied. NOTES
Press Enter to continue. This prompt is displayed only when you install/upgrade on a Solaris (8 or 9) computer, in cases where the install detects that the computer does not have the maximum or minimum required shared memory settings. |
Although a ’no’ answer can be selected to this question during
install, the user should make sure the min requirements (below) for shared
memory are met, otherwise the backups may fail (the message in logs is ’could
not start the pipeline’).
set shmsys:shminfo_shmmax=4199304 |
Enable Global Filters |
||
24. |
Type the appropriate number for configuring Global Filters for the default
subclient and press Enter to continue.
NOTES
|
Commcell Level Global Filters are set
through Calypso GUI's Control Panel in order to filter out
certain directories or files from backup Commcell-widely. If you turn on the
Global filters, they will be effective to the default subclient. There are three
options you can choose to set the filters.
1) Use Cell level policy Please select how to set the Global Filters for the default subclient? [1] |
Client Group Selection |
||
25. |
Type the number of a Client Group and press Enter.
A confirmation screen will mark your choice with an "X". Type d for done with the selection, and press Enter to continue. NOTES
|
Client Group(s) is currently configured on CommServe
cs.company.com.
Please choose the group(s) that you want to add this client
client.company.com to. The selected group(s) will be marked (X) and can be
deselected if you enter the same number again. After you are finished with the
selection, select "Done with the Selection". [ ] 1) Unix [ ] 2) DR [ ] 3) DKS [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2 |
26. |
Press Enter to continue.
NOTES
|
+---------------------+
IMPORTANT: In addition to installing Calypso on this computer, you will also need to create a Job Schedule for each iDataAgent that has been installed on this client computer. Job Schedules are required to allow the Calypso iDataAgents to perform automated backup and restore operations. Job Schedule creation can be accomplished through the Calypso CommCell Console administration interface. +---------------------+ |
Storage Policy Selection |
||
27. |
Enter the number corresponding to the storage policy through which you want to back up
the File System iDataAgent and then press Enter to continue.
NOTES
|
Please select one storage policy for this IDA from the list
below:
1) SP_StandAloneLibrary2_2 Storage Policy: [3] |
28. | If you have multiple instances of the database, ensure that the items listed are satisfied. Press Enter. |
IMPORTANT If you are planning to use Calypso <package> with several instances of the database, each running on behalf of different UNIX users, you must make sure that: 1) All database users have been added to each of the database groups involved. For example, if there is a "db2inst1" user from group "dba1" and "db2inst2" user from group "dba2", then both "db2inst1" and "db2inst2" should be included into "dba1" and "dba2" groups. On most UNIXes this can be accomplished by editing the /etc/group file. 2) The .profile of each database user must contains a "umask 002" command at the end, which will guarantee that all files created by one database user can be open for writing by other database users. 3) All database users should be added to the "dba" group that you have chosen for Calypso at the time of CVGxBase install. If all of the above requirements are not fulfilled, Calypso will run into various "Permission denied" errors, and backups will not work. Press <ENTER> to continue ... |
29. | The install program now starts copying the software to the computer. The progress of the operation is displayed. |
..... ..... ..... ..... Successfully copied xx files |
30. | Press Enter to continue. |
..... ..... Successfully installed <package_name>. Press ENTER to continue ... |
31. |
This prompt is displayed only when you are installing on HP-UX, Linux, or
Solaris computers.
Enter the number
corresponding to the Exit option and then press Enter to
continue.
The installation is now complete. |
Certain Calypso packages can be associated
with a virtual IP, or in other words, installed on a "virtual machine" belonging
to some cluster. At any given time the virtual machine's services and IP address
are active on only one of the cluster's servers. The virtual machine can
"fail-over" from one server to another, which includes stopping services and
deactivating IP address on the first server and activating the IP
address/services on the other server.
Currently you have Calypso installed on physical node stone.company.com. Now you have a choice of either adding another package to the existing installation or configure Calypso on a virtual machine for use in a cluster. 1) Add another package to
stone.company.com Your choice: [1] |
Review Install Considerations after installing the software.
Install post-release updates or Service Packs that may have been released after the release of the software. When you are installing a Service Pack, ensure that it is the same version as the one installed in the CommServe Server. Alternatively, you can enable Automatic Updates for quick and easy installation of updates in the CommCell component.