Silent Install | Install |
Use the following steps to install the Unix File System iDataAgent for Veritas Clustered environment.
Install the software on a client computer that is part of a cluster group. Make sure the cluster group satisfies the minimum requirements specified in the System Requirements.
|
1. | Calypso cluster software should be installed on each physical node at a time. | |
2. | Place the Software Installation Disc on a client computer that satisfies the minimum requirements specified in the System Requirements. | |
3. | Run the following command from the Software Installation
Disc: ./cvpkgadd |
|
4. | The product banner and other information is displayed. Press Enter. |
|
5. | Read the license agreement. Type y and press Enter. | |
6. | Enter 2 and press Enter. | Please select a setup
task you want to perform from the list below: Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software. 1) Install data protection agents on this computer 2) Advanced options 3) Exit this menu Your choice: [1] |
7. | Type 4 to select Veritas Cluster Agents. | Please select a setup
task you want to perform from the list below:
[ Custom Package Creator ] 1) Create a custom install package [ De-coupled Installer ] 2) Pre-install software Components (De-coupled Mode) [ Integrated File Archiver ] 3) File System iDataAgent with Archiving Enabler [ Customized Cluster Agents ] 4) Veritas Cluster Agents [ Done ] 5) Exit this menu Your choice: [1] |
8. | Enter the number corresponding to the binaries that you
wish to install. NOTES
|
This machine supports
both 32 bit and 64 bit binaries. By default, we will install 32 bit binary
set that has full support for all the modules included in this package.
Please note that 64 bit binary set currently only support limited modules. 1) All platforms (32 bit) 2) FS and MA only (64 bit) Your choice: [1] >>> User answer was "1" |
9. | Type the number corresponding to the VCS service group and press Enter. | Please select one service
group from the list below:
1) AIXVCS 2) ClusterService Service Group: [1] |
10. | Type 2 and press Enter. | Please select physical
or virtual machine to install: 1) Install Calypso on a physical machine ibmaix21 2) Install Calypso on a virtual machine AIXVCS 3) Exit this menu Your choice: [1] >>> User answer was "2" |
11. | Type appropriate number to select client host name and press Enter. | Please select the client
hostname or IP address below. 1) aix61cluster.mydomain.mycompany.com Interface number: [1] >>> User answer was "1". |
12. | Accept or type the number for the module that you want
to install. A confirmation screen will mark your choice with an "X". Type "d" for Done, and press Enter. NOTES
|
Install Calypso
on physical machine client.company.com Select the Calypso module that you would like to install [ ] 1) Media Agent
[1301] [CVGxMA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2 |
13. | Press Enter. | Do you want to use the agents for restore only without consuming licenses? [no] |
14. | Type the appropriate number to install the latest software
scripts and press Enter to continue. NOTES
|
Installation Scripts
Pack provides extra functions and latest support and fix performed during
setup time. Please specify how you want to get this pack. If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. 1) Download from the software provider website. 2) Use the one in the installation media 3) Use the copy I already have by entering its unix path Your choice: [1] |
15. | Press Enter. | Latest Service Pack provides
extra functions and latest support and fix for the packages you are going
to install. You can download the latest service pack from software provider
website.
If you decide to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. Do you want to download the latest service pack now? [no] |
16. | Press Enter to accept the default path and continue. Or, type a path to modify the default path and then press Enter. |
Please specify where
you want us to install Calypso binaries.
It must be a local directory and there should be at least 170MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso". Installation Directory: [/opt] |
17. | Press Enter to accept the default path and continue. Or, type a path to modify the default path and then press Enter. |
Please specify where
you want to keep Calypso log files.
It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files". Log Directory: [/var/log] |
18. | Indicate whether you would like to launch processes with
inherent database access rights.
Press Enter to assign a new group, or Type No and then press Enter to continue. |
Most of Calypso
processes run with root privileges, but some are launched by databases and
inherit database access rights. To make sure that registry and log files
can be written to by both kinds of processes we can either make such files
world-writeable or we can grant write access only to processes belonging
to a particular group, e.g. a "calypso" or a "dba"
group.
We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Calypso processes, all temporary and configuration files will be created with -rw-rw-rw permissions. If you're planning to backup Oracle DB you should use "dba" group. Would you like to assign a specific group to Calypso? [yes] |
19. | If you indicated Yes in the previous step, you will
be prompted for the group name that must be used to launch processes.
Enter the group name and then press Enter. |
Please enter the name
of the group which will be assigned to all Calypso files
and on behalf of which all Calypso processes will run.
In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here. Group name: dba REMINDER If you are planning to install Calypso
Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make
sure to include Informix, DB2, etc. users into group "dba". |
20. | Type a network TCP port number for the Communications Service
(CVD) and press Enter. Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter. |
Every instance of Calypso
should use a unique set of network ports to avoid interfering with other
instances running on the same machine. The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine. Please enter the port numbers. Port Number for CVD : [8600] Port Number for EvMgrC: [8602] |
21. | If this computer and the CommServe is separated by a firewall,
type Yes and then press Enter.
For firewall options and configuration instructions, see Firewall Configuration and continue with the installation. If you do not wish to configure the firewall services, type No and then press Enter. |
Is there a firewall between this client and the CommServe? [no] |
22. | Type the fully qualified name of the CommServe computer
and press Enter.
NOTES
|
Please specify hostname
of the CommServe below. Make sure the hostname is fully qualified, resolvable
by the name services configured on this machine. CommServe Host Name: |
23. | Type path for the Job Results Directory and press Enter. | Please specify the name
for the JobResults directory. Since you are installing Calypso on a virtual machine, the JobResults directory must reside on a shared disk and should have at least 20MB of free space available. The directory will be used to store intermediate data that should be passed from one backup phase to another. JobResults Directory: |
24. | Press Enter. | Commcell Level Global
Filters are set through Calypso GUI's Control Panel in order
to filter out certain directories or files from backup Commcell-widely.
If you turn on the Global filters, they will be effective to the default
subclient. There are three options you can choose to set the filters.
1) Use Cell level policy Please select how to set the Global Filters for the default subclient? [1] |
25. | Type the number of a Client Group and press Enter.
A confirmation screen will mark your choice with an "X". Type d for done with the selection, and press Enter to continue. NOTES
|
Client Group(s) is currently
configured on CommServe cs.company.com. Please choose the group(s) that
you want to add this client client.company.com to. The selected group(s)
will be marked (X) and can be deselected if you enter the same number again.
After you are finished with the selection, select "Done with the Selection".
[ ] 1) Unix [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2 |
26. | Enter the number corresponding to the storage policy through which you want to back up the File System iDataAgent and then press Enter. | Please select one storage
policy for this IDA from the list below:
1) SP_StandAloneLibrary2_2 Storage Policy: [1] |