You can use the following command to check the licenses on the host computer:
C:\SYMAPI\Config> type symapi_licenses.dat
Client Components (SYMCLI) are required only during the initial one-time configuration. Base Components (with SYMAPI) are necessary and required for all snap operations.
For EMC VNX:
Client Components (SYMCLI) are required only during the initial one-time configuration. Base Components (with SYMAPI) are necessary and required for all snap operations.
Follow the steps below to specify the authorization information for EMC Solutions Enabler and Navishphere CLI to ensure administrator access to the Navisphere server.
/opt/emc/SYMCLI/V6.5.3/bin# ./symcfg authorization add -host <clariion SPA IP> -username admin -password password
/opt/emc/SYMCLI/V6.5.3/bin# ./symcfg authorization add -host <clariion SPB IP> -username admin -password password
symcfg discover -clariion -file AsstDiscoFile
where AsstDiscoFile is the fully qualified path of a user-created file containing the host name or IP address of each targeted Clariion array. This file should contain one array per line./opt/Navisphere/bin# ./naviseccli -AddUserSecurity -Address <clariion SPA IP> -Scope 0 -User admin -Password password
/opt/Navisphere/bin# ./naviseccli -AddUserSecurity -Address <clariion SPB IP> -Scope 0 -User admin -Password password
On Unix computers, you might need to add the Calypso user to the agent.config file.
Before running any commands ensure that the EMC commands are verified against EMC documentation for a particular product and version. |
Provide the identification information for the array to ensure access. The following section provides step-by-step instructions for setting the array information.