Getting Started - HP-UX File System - Deployment on a Veritas Cluster

If you are installing the software using a sudo user account, make sure that sudo user account is configured on this computer. For more information, see FAQ - Install.

mount /<mount_point>

Run the following command from the Software Installation Package or mount point:

     ./cvpkgadd

Press Enter.

Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software.

1) Install data protection agents on this computer

2) Advance options

3) Exit this menu

Your choice: [1]

[Record and Play]
1) Create a recording of user selections (Record Mode
2) Play a recorded install on this computer
[Custom Package Creator]
3) Create a custom install package
[De-coupled Installer]
4) Pre-install software Components [De-couple Mode]
[Integrated File Archiver]
5) File System iDataAgent with Archiving Enabler
[Customized Cluster Agents]
6) Veritas Cluster Agents
[Third Party Connector]
7) Symantec NetBackup Agent
8) NetApp Snap Manager for Oracle
9) NetApp Snap Manager for SAP/Oracle
[Done]
10) Exit this menu

Your choice: [1] 6

Select 32 bit when installing on a 32-bit computer. When installing on a 64-bit computer, if this is the first package, determine whether you want to install 32-bit binaries or 64 bit binaries. You can determine this by verifying whether all the components that you wish to install in this computer are supported in 64-bit in System Requirements. Note that when the first component is installed using 64-bit binaries, you cannot subsequently install another component using 32-bit. (Or vice-versa.)

 

1) All platforms (32 bit)

2) FS and MA only (64 bit)

Your choice: [1] >>> User answer was "1"

Please select one service group from the list below:

1) AIXVCS

2) ClusterService

Service Group: [1]

1) Install Calypso on a physical machine ibmaix21

2) Install Calypso on a virtual machine AIXVCS

3) Exit this menu

Your choice: [1] >>> User answer was "2"

1) aix61cluster.mydomain.mycompany.com

Interface number: [1] >>> User answer was "1".

Select the Calypso module that you would like to install

[ ] 1) Media Agent        [1301] [CVGxMA]
[ ] 2) UNIX FileSystem iDataAgent     [1101] [CVGxIDA]
    >) >>>>> NEXT PAGE  >>>>>>

[a=all n=none r=reverse q=quit d=done >=next <=previous ?=help]

Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2

Type d for Done, and press Enter.

Select the Calypso module that you would like to install

[ ] 1) Media Agent        [1301] [CVGxMA]
[X] 2) UNIX FileSystem iDataAgent     [1101] [CVGxIDA]
    >) >>>>> NEXT PAGE  >>>>>>

[a=all n=none r=reverse q=quit d=done >=next <=previous ?=help]

Enter number(s)/one of "a,n,r,q,d,>,<,?" here: d

If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity.

1) Download from the software provider website.

2) Use the one in the installation media

3) Use the copy I already have by entering its unix path

Your choice: [1] 2

Do you want to download the latest service pack now? [no]

Press Enter to accept the default path.

• If you want to specify a different path, type the path and then press Enter.

• If you want to install the software binaries to an NFS shared drive, specify the directory on which you have mounted the NFS file system and then press Enter.

  In order to make sure that the client computer has read/write access to NFS shared drive, review the steps described in Installing Software Binaries to an NFS Shared Drive.

It must be a local directory and there should be at least 176MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso".

Installation Directory: [/opt]

It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files".

Log Directory: [/var/log]

We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Software processes, you will need to specify the access permissions later.

If you're planning to backup Oracle DB you should use "dba" group.

Would you like to assign a specific group to Software? [yes]

Press Enter again.

In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here.

Group name: sky1

REMINDER

If you are planning to install Calypso Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make sure to include Informix, DB2, etc. users into group "sky1".

Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter.

The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine.

Please enter the port numbers.

Port Number for CVD : [8400]

Port Number for EvMgrC: [8402]

If this computer is separated from the CommServe by firewall(s), type Yes and then press Enter. For firewall options and configuration instructions, see Firewall Configuration and continue with the installation.

CommServe Host Name: mycommserve.company.com

Since you are installing Calypso on a virtual machine, the JobResults directory must reside on a shared disk and should have at least 20MB of free space available. The directory will be used to store intermediate data that should be passed from one backup phase to another.

JobResults Directory:

1) Use Cell level policy

2) Always use Global filters

3) Do not use Global filters

Please select how to set the Global Filters for the default subclient? [1]

A confirmation screen will mark your choice with an "X".

Type d for done with the selection, and press Enter to continue.

[ ] 1) Unix
[ ] 2) DR
[ ] 3) DKS

[a=all n=none r=reverse q=quit d=done >=next <=previous ?=help]

Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2

1) SP_StandAloneLibrary2_2
2) SP_Library3_3
3) SP_MagLibrary4_4
4) fornax_fornax_HWCmp
5) ranger_ranger_HWCmp
6) fornax_fornax_ClntCmp
7) fornax_fornax_MACmp
8) fornax_fornax_NoCmp

Storage Policy: [1]

You may not be prompted for user input.

Adjusting modes and permissions of files

Successfully installed Calypso

The installation is now complete.

If you do not have Storage Policy created, follow the procedure given below.

1. From the CommCell Browser, navigate to Policies.
2. Right-click the Storage Policies and then click New Storage Policy.
3. Follow the prompts displayed in the Storage Policy Wizard. The required options are mentioned below:
   • Select the Storage Policy type as Data Protection and Archiving and click Next.
   • Enter the name in the Storage Policy Name box and click Next.
   • From the Library list, click the name of a disk library to which the primary copy should be associated and then click Next.

     Ensure that you select a library attached to a MediaAgent operating in the current release.

   • From the MediaAgent list, click the name of a MediaAgent that will be used to create the primary copy and then click Next.
   • For the device streams and the retention criteria information, click Next to accept default values.
   • Select Yes to enable deduplication for the primary copy.
   • From the MediaAgent list, click the name of the MediaAgent that will be used to store the Deduplication store.

     Type the name of the folder in which the deduplication database must be located in the Deduplication Store Location or click the Browse button to select the folder and then click Next.

   • Review the details and click Finish to create the Storage Policy.