Skip this page if you are not installing this agent on a UNIX Computer.
Click to continue with the deployment.
Install the software on a UNIX computer on which the Sybase server resides, and satisfies the minimum requirements specified in the System Requirements.
For Solaris, software can be installed on one of the following:
Installation |
before You begin |
||
|
Download the latest software package to perform the install. Verify that the computer in which you wish to install the software satisfies the System Requirements. |
1. |
Logon to the client computer as root or as a sudo user. If you are installing the software using a sudo user account, make sure that sudo user account is configured on this computer. For more information, see FAQ - Install. |
|||
2. |
|
|||
3. |
The product banner and other information is displayed. Press Enter. |
|||
4. | Read the license agreement. Type y and press Enter. | |||
5. | Press Enter. |
Please select a setup task you want to perform
from the list below: Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software. 1) Install data protection agents on this computer 2) Advance options 3) Exit this menu Your choice: [1] |
||
6. | Press Enter. |
Certain Calypso
packages can be associated with a virtual IP, or in other words, installed
on a "virtual machine" belonging to some cluster. At any given time the
virtual machine's services and IP address are active on only one of the
cluster's servers. The virtual machine can "fail-over" from one server to
another, which includes stopping services and deactivating IP address on
the first server and activating the IP address/services on the other server. You now have a choice of performing a regular Calypso install on the physical host or installing Calypso on a virtual machine for operation within a cluster. Most users should select "Install on a physical machine" here. 1) Install on a physical machine 2) Install on a virtual machine 3) Exit Your choice: [1] |
||
7. |
If you have only one network interface, press Enter
to accept the default network interface name and continue. If you have multiple network interfaces, enter the interface name that you wish to use as default, and then press Enter.
|
We found one network
interface available on your machine. We will associate it with the physical
machine being installed, and it will also be used by the CommServe to connect
to the physical machine. Note that you will be able to additionally customize
Datapipe Interface Pairs used for the backup data traffic later in the Calypso
Java GUI. Please check the interface name below, and make connections if necessary: Physical Machine Host Name: [angel.company.com] |
||
8. | Press Enter. |
Please specify the client
name for this machine. It does not have to be the network host name: you can enter any word here without spaces. The only requirement is that it must be unique on the CommServe. Physical Machine Client name: [angel] |
||
9. | Type the number associated with the Sybase iDataAgent and press Enter. |
Install Calypso
on physical machine 172.19.99.62 Please select the Calypso module(s) that you would like to install. [ ] 1) MediaAgent [1301] [CVGxMA] [ ] 2) UNIX File System iDataAgent [1101] [CVGxIDA] [ ] 3) Sybase iDataAgent [1202] [CVGxSybIDA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here:3 |
||
10. | A confirmation screen will mark your choice with an "X". Type d for Done, and press Enter. |
Install Calypso
on physical machine 172.19.99.62 Please select the Calypso module(s) that you would like to install. [ ] 1) MediaAgent [1301] [CVGxMA] [X ] 2) UNIX File System iDataAgent [1101] [CVGxIDA] [X ] 3) Sybase iDataAgent [1202] [CVGxSybIDA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here:3 |
||
11. | Press Enter. | Do you want to use the agents for restore only without consuming licenses? [no] | ||
12. |
Type the appropriate number to install the latest software
scripts and press Enter.
|
Installation Scripts
Pack provides extra functions and latest support and fix performed during
setup time. Please specify how you want to get this pack. If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. 1) Download from the software provider website. 2) Use the one in the installation media 3) Use the copy I already have by entering its unix path Your choice: [1] 2 |
||
13. | Press Enter. |
Keep Your Install Up
to Date - Latest Service Pack Latest Service Pack provides extra functions and latest support and fix for the packages you are going to install. You can download the latest service pack from software provider website. If you decide to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. Do you want to download the latest service pack now? [no] |
||
14. |
Press Enter to accept the default path.
|
Please specify where
you want us to install Calypso binaries. It must be a local directory and there should be at least 176MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso". Installation Directory: [/opt] |
||
15. |
Press Enter to accept the default location.
|
Please specify where
you want to keep Calypso log files. It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files". Log Directory: [/var/log] |
||
16. | Type Yes and press Enter.
|
Most of Software
processes run with root privileges, but some are launched by databases and
inherit database access rights. To make sure that registry and log files
can be written to by both kinds of processes we can either make such files
world-writeable or we can grant write access only to processes belonging
to a particular group, e.g. a "calypso" or a "dba"
group. We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Software processes, you will need to specify the access permissions later. If you're planning to backup Oracle DB you should use "dba" group. Would you like to assign a specific group to Software? [yes] |
||
17. | Type the Group name and then press Enter. |
Please enter the name
of the group which will be assigned to all Software files and on behalf
of which all Software processes will run.
In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here. Group name: dba REMINDER If you are planning to install Calypso Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make sure to include Informix, DB2, etc. users into group "dba". |
||
18. | Type d for done with the selection and press
Enter. This screen is displayed if you do not assign any group to the software and type no in step 16. |
Access Permissions for
Other Users.Installer will assign full access rights to root user and its belonging
group
for all installed Calypso files and its processes.For any other users, you can specify the access permissions now. However,
since you chose not to assign a dedicated group in previous step, make
sure you specify sufficient access rights for other users if you are
also planning to install Calypso agents involving third party software
protection. [X] 1) Allow read
permission to other users a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: d |
||
19. | This prompt is relevant only when you install on Solaris.
Press Enter to accept the default value for Number of Streams.
|
Number of Streams IMPORTANT : Please read install document "Configure Kernel Parameters - Unix/Macintosh" from "Books Online" before you start configuring kernel parameters. Please enter the total number of streams that you plan to run at the same time. We need to make sure that you have enough semaphores and shared memory segments configured in /etc/system. Number of streams [10] |
||
20. | Press Enter if you do not want the changes to be
updated automatically.
|
We now need to modify the /etc/system
configuration file on this computer. It is done to make sure that there
will be enough shared memory and semaphores available for
Calypso programs. Please review the changes below and
answer "yes" if you want us to apply them to the /etc/system file.
Otherwise, the installation will proceed, the changes will be saved to
some other file, and you will have to apply them manually.
set shmsys:shminfo_shmmni=8570 (was 7930) |
||
21. | Press Enter. |
Changes saved into /etc/system.gal.1744 Press <ENTER> to continue. |
||
22. | Press Enter. You will see this prompt if you have accepted the default no and pressed Enter in step 20. |
Although a ’no’ answer can be selected
to this question during install, the user should make sure the min
requirements (below) for shared memory are met, otherwise the backups
may fail (the message in logs is ’could not start the pipeline’).
set shmsys:shminfo_shmmax=4199304 |
||
23. |
Type a network TCP port number for the Communications Service (CVD) and
press Enter. Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter. |
Every instance of Calypso
should use a unique set of network ports to avoid interfering with other
instances running on the same machine. The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine. Please enter the port numbers. Port Number for CVD : [8400] Port Number for EvMgrC: [8402] |
||
24. |
If you do not wish to configure the firewall services, press Enter.
|
Is there a firewall between this client and the CommServe? [no] | ||
25. |
Type the fully qualified CommServe host name and press Enter.
|
Please specify hostname
of the CommServe below. Make sure the hostname is fully qualified, resolvable
by the name services configured on this machine. CommServe Host Name: mycommserve.company.com |
||
26. | Press Enter. |
Commcell Level Global
Filters are set through Calypso GUI's Control Panel in order
to filter out certain directories or files from backup Commcell-widely.
If you turn on the Global filters, they will be effective to the default
subclient. There are three options you can choose to set the filters. 1) Use Cell level policy 2) Always use Global filters 3) Do not use Global filters Please select how to set the Global Filters for the default subclient? [1] |
||
27. | Type the number associated with the Client Group and press
Enter.
|
Client Group(s) is currently
configured on CommServe cs.company.com. Please choose the group(s) that
you want to add this client client.company.com to. [ ] 1) Unix [ ] 2) DR [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 1 |
||
28. | A confirmation screen will mark your choice with an "X".
Type d for done with the selection, and press Enter to continue. |
Client Group(s) is currently
configured on CommServe cs.company.com. Please choose the group(s) that
you want to add this client client.company.com to. [X ] 1) Unix [ ] 2) DR [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: d |
||
29. | Enter the number associated with the storage policy you want use and press Enter. |
Please select one storage
policy for this IDA from the list below: 1) SP_StandAloneLibrary2_2 2) SP_Library3_3 3) SP_MagLibrary4_4 Storage Policy: [1] |
||
If you do not have Storage Policy created, this message
will be displayed. You may not be prompted for user input.
|
There seem to be no Storage
Policies configured on the CommServe. Before you can run any backups of
this IDA, you will need to install a MediaAgent, create a Storage Policy
and assign it to all subclients.. Adjusting modes and permissions of files Successfully installed Calypso |
|||
30. | Type the Sybase user ID and press Enter | Please enter SYBASE user ID [sybase]: | ||
31. | Type the name of the user group for Sybase and press Enter. | Please enter user group for sybase [sybase]: | ||
32. | Type the name of the Sybase Adaptive server and press Enter. | Please enter SYBASE home directory: /test2/sybase/sybase12.5_64 | ||
33. | Type the name of the Sybase home directory and press Enter. | Please enter the SYBASE SERVER Name: cross_mc | ||
34. | Type the name of the Sybase ASE directory
and press Enter. The Sybase ASE (Adaptive Server Enterprise) server library is generally located under the Sybase ASE server install/home directory. |
Please enter the SYBASE_ASE directory: ASE-12_5 | ||
35. | Type the name of the Sybase OCS variable
and press Enter. You can view the location of this variable in sybase.env file residing in home directory. |
Please enter the SYBASE_OCS variable: OCS-12_5 | ||
Listing the values that you entered. | Values
input are: SYBASE_USER=sybase SYBASE_GRP =sybase CXDIR =/opt/Calypso/Base SYBASE_SERVER =cross_mc SYBASE =/test2/sybase/sybase12.5_64 SYBASE_ASE =/test2/sybase/sybase12.5_64/ASE-12_5 SYBASE_OCS =/test2/sybase/sybase12.5_64/OCS-12_5 SYBLIBPATH =/test2/sybase/sybase12.5_64/ASE-12_5/lib |
|||
36. | Type 3 to the Exit option and press Enter. The installation is now complete. |
Certain Calypso
packages can be associated with a virtual IP, or in other words, installed
on a "virtual machine" belonging to some cluster. At any given time the
virtual machine's services and IP address are active on only one of the
cluster's servers. The virtual machine can "fail-over" from one server to
another, which includes stopping services and deactivating IP address on
the first server and activating the IP address/services on the other server. Currently you have Calypso installed on physical node angel.company.com. Now you have a choice of either adding another package to the existing installation or configure Calypso on a virtual machine for use in a cluster. 1) Add another package to angel.company.com 2) Install Calypso on a virtual machine 3) Exit Your choice: [1] 3 |
||
If you already have a storage policy selected in
step 29, proceed to the
Configuration section. If you do not have Storage Policy created, follow the procedure given below. |
||||
37. |
|
Additional Installation Methods |
Create a compact software package for quick deployment to multiple clients Deploy the software from CommCell Console on multiple clients. Deploy the software silently on multiple clients. |