![]() ![]() |
Skip this page if you are not installing this agent on a UNIX cluster.
Click to begin
Configuration.
Where to Install |
Before You Begin |
Install the software on a client computer that you want to protect and is part of a Cluster which satisfies the minimum requirements specified in the System Requirements. |
Download the latest software package to perform the install. Make sure that the computer in which you wish to install the software satisfies the System Requirements. |
1. | Logon to the active node as root. | |||
2. |
If your are installing the software from CD, run the following command to
mount the CD: mount -t iso9660,udf /dev/cdrom /mnt/cdrom Run the following command from the Software Installation Package or mount point: ./cvpkgadd |
|||
3. |
The product banner and other information is displayed. Press Enter. |
|||
4. | Read the license agreement. Type y and press Enter. | |||
5. | Press Enter. |
Please select a setup task you want to perform
from the list below: Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software. 1) Install data protection agents on this computer 2) Advance options 3) Exit this menu Your choice: [1] |
||
6. |
|
32 or 64? This machine supports both 32 bit and 64 bit binaries. By default, we will install 32 bit binary set that has full support for all the modules included in this package. Please note that 64 bit binary set currently only support limited modules. 1) All platforms(32 bit) 2) FS and MS only(64 bit) Your choice: [1] |
||
7. | Type 2, and press Enter to install on a computer which is part of a Cluster. |
Certain Calypso
packages can be associated with a virtual IP, or in other words, installed
on a "virtual machine" belonging to some cluster. At any given time the
virtual machine's services and IP address are active on only one of the
cluster's servers. The virtual machine can "fail-over" from one server to
another, which includes stopping services and deactivating IP address on
the first server and activating the IP address/services on the other server. You now have a choice of performing a regular Calypso install on the physical host or installing Calypso on a virtual machine for operation within a cluster. Most users should select "Install on a physical machine" here. 1) Install on a physical machine 2) Install on a virtual machine 3) Exit Your choice: [2] |
||
8. | Type the name of the computer that you want to configure or its corresponding IP address and press Enter. |
Please enter the hostname
or IP address of the virtual machine being installed. It can be either short
or long; the only requirement is that it must be resolvable by the name
services configured on this machine WARNING: You should follow this path ONLY if this host participates in a cluster and you really want to install Calypso on the virtual machine. This is NOT how most people will use Calypso. If you got into this screen by mistake, hit ^C and restart cvpkgadd. Virtual Machine Host Name:devm.mycompany.com |
||
9. | Press Enter. |
Virtual
Machine Client Name Please specify the client name for this machine. It does not have to be the network host name: you can enter any word here without spaces. The only requirement is that it must be unique on the CommServe. Virtual Machine Client Name: [devm] |
||
10. |
Specify the network interface that you want to associate with the
physical machine and press Enter.
|
Even though it is a
virtual machine that you are installing now, we still have to ask you to
provide hostname and client name for the physical node.
Network interfaces with the following IPs are available on your system. Please select the one that you want to be associated with Calypso physical machine. The interface should be static, and should not get disabled in case of cluster failover. 1) mackrel71 Interface number: [1] 2 |
||
11. | Verify the name of the physical interface and make any required changes. Then press Enter. |
Please verify the
physical interface name below. Make it as complete (with fully qualified
domain name) as possible.
Physical Hostname: [mackrel] |
||
12. | Enter a node name for the physical machine and press Enter. |
Even though you are
installing Calypso on a virtual machine, we still need to ask you to provide a
node name for the physical machine. It does not have to be the network host name: you can enter any word here without spaces. The only requirement is that it must be unique on the CommServe. Physical Machine Node Name: [mackrel] |
||
13. | Type the number associated with the Sybase iDataAgent and press Enter. |
Install Calypso
on physical machine mackrell Please select the Calypso module(s) that you would like to install. [ ] 1) MediaAgent [1301] [CVGxMA] [ ] 2) UNIX File System iDataAgent [1101] [CVGxIDA] [ ] 3) Sybase iDataAgent [1202] [CVGxSybIDA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here:3 |
||
14. | A confirmation screen will mark your choice with an "X". Type d for Done, and press Enter. |
Install Calypso
on physical machine mackrell Please select the Calypso module(s) that you would like to install. [ ] 1) MediaAgent [1301] [CVGxMA] [X] 2) UNIX File System iDataAgent [1101] [CVGxIDA] [X] 3) Sybase iDataAgent [1202] [CVGxSybIDA] [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here:d |
||
15. | Press Enter. | Do you want to use the agents for restore only without consuming licenses? [no] | ||
16. |
Type the appropriate number to install the latest software
scripts and press Enter.
|
Installation Scripts
Pack provides extra functions and latest support and fix performed during
setup time. Please specify how you want to get this pack. If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. 1) Download from the software provider website. 2) Use the one in the installation media 3) Use the copy I already have by entering its unix path Your choice: [1] 2 |
||
17. | Press Enter. |
Keep Your Install Up
to Date - Latest Service Pack Latest Service Pack provides extra functions and latest support and fix for the packages you are going to install. You can download the latest service pack from software provider website. If you decide to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity. Do you want to download the latest service pack now? [no] |
||
18. |
Press Enter to accept the default path.
|
Please specify where
you want us to install Calypso binaries. It must be a local directory and there should be at least 176MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso". Installation Directory: [/opt] |
||
19. |
Press Enter to accept the default location.
|
Please specify where
you want to keep Calypso log files. It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files". Log Directory: [/var/log] |
||
20. | Type Yes and press Enter.
|
Most of Software
processes run with root privileges, but some are launched by databases and
inherit database access rights. To make sure that registry and log files
can be written to by both kinds of processes we can either make such files
world-writeable or we can grant write access only to processes belonging
to a particular group, e.g. a "calypso" or a "dba"
group. We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Software processes, you will need to specify the access permissions later. If you're planning to backup Oracle DB you should use "dba" group. Would you like to assign a specific group to Software? [yes] |
||
21. | Type the Group name and then press Enter. |
Please enter the name
of the group which will be assigned to all Software files and on behalf
of which all Software processes will run.
In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here. Group name: dba REMINDER If you are planning to install Calypso Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make sure to include Informix, DB2, etc. users into group "dba". |
||
22. |
Type d for done with the selection and press
Enter. This screen is displayed if you do not assign any group to software and type no in step 20. |
Access Permissions for
Other Users Installer will assign full access rights to root user and its belonging group for all installed Calypso files and its processes. For any other users, you can specify the access permissions now. However, since you chose not to assign a dedicated group in previous step, make sure you specify sufficient access rights for other users if you are also planning to install Calypso agents involving third party software protection. [X] 1) Allow read
permission to other users
a=all n=none r=reverse q=quit d=done
>=next <=previous ?=help] |
||
23. |
This prompt is relevant only when you install on Solaris.
Press Enter to accept the default value for Number of Streams.
|
Number of Streams IMPORTANT : Please read install document "Configure Kernel Parameters - Unix/Macintosh" from "Books Online" before you start configuring kernel parameters. Please enter the total number of streams that you plan to run at the same time. We need to make sure that you have enough semaphores and shared memory segments configured in /etc/system. Number of streams [10] |
||
24. |
Press Enter if you do not want the changes to be updated automatically.
|
We now need to modify the /etc/system
configuration file on this computer. It is done to make sure that there
will be enough shared memory and semaphores available for
Calypso programs. Please review the changes below and
answer "yes" if you want us to apply them to the /etc/system file.
Otherwise, the installation will proceed, the changes will be saved to
some other file, and you will have to apply them manually.
set shmsys:shminfo_shmmni=8570 (was 7930) |
||
25. | Press Enter. |
Changes saved into /etc/system.gal.1744 Press <ENTER> to continue. |
||
26. |
Press Enter. You will see this prompt if you have accepted the default no and pressed Enter in step 24. |
Although a ’no’ answer can be selected
to this question during install, the user should make sure the min
requirements (below) for shared memory are met, otherwise the backups
may fail (the message in logs is ’could not start the pipeline’).
set shmsys:shminfo_shmmax=4199304 |
||
27. |
Type a network TCP port number for the Communications Service (CVD) and
press Enter. Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter. |
Every instance of Calypso
should use a unique set of network ports to avoid interfering with other
instances running on the same machine. The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine. Please enter the port numbers. Port Number for CVD : [8400] Port Number for EvMgrC: [8402] |
||
28. |
If you do not wish to configure the firewall services, press Enter.
|
Is there a firewall between this client and the CommServe? [no] | ||
29. |
Type the fully qualified CommServe host name and press Enter.
|
Please specify hostname
of the CommServe below. Make sure the hostname is fully qualified, resolvable
by the name services configured on this machine. CommServe Host Name: mycommserve.company.com |
||
30. | Press Enter. |
Commcell Level Global
Filters are set through Calypso GUI's Control Panel in order
to filter out certain directories or files from backup Commcell-widely.
If you turn on the Global filters, they will be effective to the default
subclient. There are three options you can choose to set the filters. 1) Use Cell level policy 2) Always use Global filters 3) Do not use Global filters Please select how to set the Global Filters for the default subclient? [1] |
||
31. | Type the number associated with the Unix File System iDataAgent and press Enter. |
Client Group(s) is currently
configured on CommServe cs.company.com. Please choose the group(s) that
you want to add this client client.company.com to. [ ] 1) Unix [ ] 2) DR [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 1 |
||
32. |
A confirmation screen will mark your choice with an "X". Type d for Done, and press Enter. |
Client Group(s) is currently
configured on CommServe cs.company.com. Please choose the group(s) that
you want to add this client client.company.com to. [X ] 1) Unix [ ] 2) DR [a=all n=none r=reverse q=quit d=done >=next <=previous ?=help] Enter number(s)/one of "a,n,r,q,d,>,<,?" here: d |
||
33. | Enter the number associated with the storage policy you want use and press Enter. |
Please select one storage
policy for this IDA from the list below: 1) SP_StandAloneLibrary2_2 2) SP_Library3_3 3) SP_MagLibrary4_4 Storage Policy: [1] |
||
If you do not have Storage Policy
created, this message will be displayed. You may not be prompted for user input.
|
There
seem to be no Storage Policies configured on the CommServe. Before you can run any backups of this IDA, you will need to install a MediaAgent,
create a Storage Policy and assign it to all subclients.. Adjusting modes and permissions of files Successfully installed Calypso |
|||
34. | Type the Sybase user ID and press Enter | Please enter SYBASE user ID [sybase]: | ||
35. | Type the name of the user group for Sybase and press Enter | Please enter user group for sybase [sybase]: | ||
36. | Type the name of the Sybase Adaptive server and press Enter. | Please enter SYBASE home directory: /test2/sybase/sybase12.5_64 | ||
37. | Type the name of the Sybase home directory and press Enter. | Please enter the SYBASE SERVER Name: cross_mc | ||
38. | Type the name of the Sybase ASE directory
and press Enter. The Sybase ASE (Adaptive Server Enterprise) server library is generally located under the Sybase ASE server install directory. |
Please enter the SYBASE_ASE directory: ASE-12_5 | ||
39. | Type the name of the Sybase OCS variable and press Enter. | Please enter the SYBASE_OCS variable: OCS-12_5 | ||
Listing the values that you entered. |
Values
input are: SYBASE_USER=sybase SYBASE_GRP =sybase CXDIR =/opt/Calypso/Base SYBASE_SERVER =cross_mc SYBASE =/test2/sybase/sybase12.5_64 SYBASE_ASE =/test2/sybase/sybase12.5_64/ASE-12_5 SYBASE_OCS =/test2/sybase/sybase12.5_64/OCS-12_5 SYBLIBPATH =/test2/sybase/sybase12.5_64/ASE-12_5/lib |
|||
40. | Type 4 to the Exit option and
press Enter. The installation is now complete. |
Calypso is currently
configured on virtual machine devmc.company.com. Now you have an option of installing Calypso on physical machine, another virtual machine or you can add a new package to devmc.company.com. 1) Add a new package to
hpuxmc1.company.com Your choice: [4] |
||
![]() |
If you already have a storage policy
selected in step 33, proceed to the
Configuration section. If you do not have Storage Policy created, follow the procedure given below. |
|||
41. |
|
![]() |
![]() ![]() |