Install ContinuousDataReplicator - UNIX

Table of Contents

Where to Install

Install Requirements

Before You Begin

Install Procedure

Getting Started

Select Components for Installation

Base Software Installation

CDR Configuration

Setup Complete

Post-Install Considerations

Where to Install

Install the software directly on the computer hosting the global zone or the Unix Server that you wish to protect. Make sure the computer satisfies the minimum requirements specified in the System Requirements.

On the source computer, the ContinuousDataReplicator can be used to replicate data from any non-global zone.

Install Requirements

The following procedure describes the steps involved in installing ContinuousDataReplicator. ContinuousDataReplicator is installed on at least two machines; the server from which you will replicate data (source computer) and the computer to which you will replicate the data (destination computer.) You may choose to perform additional installations, based on the Supported Configuration used in your particular environment.

Verify that the computers in which you are installing the software satisfy the minimum requirements specified in System Requirements - ContinuousDataReplicator.

Review the following Install Requirements before installing the software:

General

HP-UX

Before You Begin

Install Procedure

Getting Started

1. Place the software installation disc for the Unix platform into the disc drive.

You can also install the product using a disc drive mounted on another computer on the network.

  • On Solaris, double-click the cvpkgadd program from the File Manager window.
  • On other Unix platforms, open the Terminal window, navigate to the software installation disc and then enter ./cvpkgadd. 
2. The product banner and other information is displayed.

Press Enter to continue.

  
3. Read the license agreement. Type y and press Enter to continue.  
4. Enter the number corresponding to the setup task you want to perform.

NOTES

  • For Install data protection agents on this computer option, follow the steps described in this procedure.
  • Advance options provide additional setup features such as record and play setup, creating a custom package and External Data Connector Agent software.

    To create a custom package and for record and play setup, follow the steps described in Custom Package - Unix.

    To install the External Data Connector Agent, follow the steps described in External Data Connector - Unix.

 Please select a setup task you want to perform from the list below:

Advance options provide extra setup features such as creating custom package, recording/replaying user selections and installing External Data Connector software.

1) Install data protection agents on this computer

2) Advance options

3) Exit this menu

Your choice: [1]
5. If your computer is 32-bit, press Enter.

If your computer is 64-bit, see Install Unix Agents on 64-bit Platform for step-by-step procedure.

This machine supports both 32 bit and 64 bit binaries. By default, we will install 32 bit binary set that has full support for all the modules included in this package. Please note that 64 bit binary set currently only support limited modules.

1) All platforms (32 bit)

2) FS and MA only (64 bit)

Your choice: [1]
6. This prompt is displayed only when you are installing on AIX, HP-UX, Linux, or Solaris computers.

Press Enter to continue

NOTES

  • When you install on non-clustered computer, you must select the number associated with the option Install on a physical machine.
 Certain Calypso packages can be associated with a virtual IP, or in other words, installed on a "virtual machine" belonging to some cluster. At any given time the virtual machine's services and IP address are active on only one of the cluster's servers. The virtual machine can "fail-over" from one server to another, which includes stopping services and deactivating IP address on the first server and activating the IP address/services on the other server.

You now have a choice of performing a regular Calypso install on the physical host or installing Calypso on a virtual machine for operation within a cluster.

Most users should select "Install on a physical machine" here.

1) Install on a physical machine

2) Install on a virtual machine

3) Exit

Your choice: [1]
7. If you have only one network interface, press Enter to accept the default network interface name and continue.

If you have multiple network interfaces, enter the number corresponding to the network interface that you wish to use as default, and then press Enter to continue.

NOTES

  • The interface name and IP addresses depend on the computer in which the software is installed and may be different from the example shown.
 We found one network interface available on your machine. We will associate it with the physical machine being installed, and it will also be used by the CommServe to connect to the physical machine. Note that you will be able to additionally customize Datapipe Interface Pairs used for the backup data traffic later in the Calypso Java GUI.

Please check the interface name below, and make connections if necessary:

Physical Machine Host Name: [angel.company.com]
8. Specify the client name for the computer.

Press Enter to accept the default name and continue, or
Enter a new client name for the computer and then press Enter to continue.

 Please specify the client name for this machine.

It does not have to be the network host name: you can enter any word here without spaces. The only requirement is that it must be unique on the CommServe.

Physical Machine Client name: [angel]

Select Components for Installation
9. Enter the number corresponding to the CVGxCDR module.

A confirmation screen will mark your choice with an "X". Type "d" for Done, and press Enter to continue.

NOTES

  • To select multiple component, enter the number by adding a space.
  • Your screen may look different from the example shown.
  • Components that either have already been installed, or which cannot be installed, will not be shown.
  • In addition, the list of modules that appear depends on the specific Unix File System in which the package is installed. (e.g., CVGxWA will appear only when the installation package is run on a Solaris computer.)
Install Calypso on physical machine client.company.com

Select the Calypso module that you would like to install

[ ] 1) Media Agent        [1301] [CVGxMA]
[ ] 2) FileSystem IDA     [1101] [CVGxIDA]
    >) >>>>> NEXT PAGE  >>>>>>

[a=all n=none r=reverse q=quit d=done >=next <=previous ?=help]

Enter number(s)/one of "a,n,r,q,d,>,<,?" here: 2

Base Software Installation
10. If you wish to install the agent software for restore only, enter Yes and press Enter to continue. See Installing Restore Only Agents for more information.

Otherwise, accept no, press Enter to continue.

 Do you want to use the agents for restore only without consuming licenses? [no]
11. Type the appropriate number to install the latest software scripts and press Enter to continue.

NOTES

  • Select Download from the software provider website to download the latest software scripts from your software provider website.

    Make sure you have internet connectivity when you are using this option.

  • Select Use the one in the installation media, to install the software scripts from the disc or share from which the installation is performed.
  • Select Use the copy I already have by entering its unix path, to specify the path if you have the software script in an alternate location.
 Installation Scripts Pack provides extra functions and latest support and fix performed during setup time. Please specify how you want to get this pack.

If you choose to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity.

1) Download from the software provider website.

2) Use the one in the installation media

3) Use the copy I already have by entering its unix path

Your choice: [1] 2
12. Enter Yes to download and install the latest service packs and post packs from the software provider.

NOTES

  • Internet connectivity is required to download updates.
  • This step is applicable for multi instancing.

Press Enter to continue.

 Keep Your Install Up to Date - Latest Service Pack

Latest Service Pack provides extra functions and latest support and fix for the packages you are going to install. You can download the latest service pack from software provider website.

If you decide to download it from the website now, please make sure you have internet connectivity at this time. This process may take some time depending on the internet connectivity.

Do you want to download the latest service pack now? [no]

Press <ENTER> to continue ...
13. Specify the location where you want to install the software.

NOTES

  • The amount of free space required depends on the components selected for install, and may look different from the example shown.

Press Enter to accept the default path and continue, or
Enter a path and then press Enter to continue.

Press Enter again to confirm the path.

 Please specify where you want us to install Calypso binaries.

It must be a local directory and there should be at least 98MB of free space available. All files will be installed in a "calypso" subdirectory, so if you enter "/opt", the files will actually be placed into "/opt/calypso".

Installation Directory: [/opt]

..

Calypso will be installed in /opt/calypso.
Press ENTER to continue ...

14. Specify the location for the log files.

NOTES

  • All the modules installed on the computer will store the log files in this directory.
  • The amount of free space required depends on the components selected for install, and may look different from the example shown.

Press Enter to accept the default path and continue, or
Enter a path and then press Enter to continue.

Press Enter again to confirm the path.

 Please specify where you want to keep Calypso log files.

It must be a local directory and there should be at least 100MB of free space available. All log files will be created in a "calypso/Log_Files" subdirectory, so if you enter "/var/log", the logs will actually be placed into "/var/log/calypso/Log_Files".

Log Directory: [/var/log]

..

Calypso log files will be created in /var/log/calypso/Log_Files.
Press ENTER to continue ...

15. Indicate whether you would like to launch processes with inherent database access rights.

Press Enter to assign a new group, or
Type No and then press Enter to continue.

 Most of Calypso processes run with root privileges, but some are launched by databases and inherit database access rights. To make sure that registry and log files can be written to by both kinds of processes we can either make such files world-writeable or we can grant write access only to processes belonging to a particular group, e.g. a "calypso" or a "dba" group.

We highly recommend now that you create a new user group and enter its name in the next setup screen. If you choose not to assign a dedicated group to Calypso processes, all temporary and configuration files will be created with -rw-rw-rw permissions.

If you're planning to backup Oracle DB you should use "dba" group.

Would you like to assign a specific group to Calypso? [yes]
16. If you indicated Yes in the previous step, you will be prompted for the group name that must be used to launch processes.

Enter the group name and then press Enter to continue.

Press Enter again to continue.

 Please enter the name of the group which will be assigned to all Calypso files and on behalf of which all Calypso processes will run.

In most of the cases it's a good idea to create a dedicated "calypso" group. However, if you're planning to use Oracle iDataAgent or SAP Agent, you should enter Oracle's "dba" group here.

Group name: dba

REMINDER

If you are planning to install Calypso Informix, DB2, PostgreSQL, Sybase or Lotus Notes iDataAgent, please make sure to include Informix, DB2, etc. users into group "dba".
Press <ENTER> to continue ...

17. Type a network TCP port number for the Communications Service (CVD) and press Enter.

Type a network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter.

NOTES

  • For more information about Network TCP Ports, see Network TCP Port Requirements.
  • For more information about these services, see Services.
  • If the port number you entered already exists, a message will be displayed Port #### is already reserved in /etc/services. To work around this issue, enter different port number.
 Every instance of Calypso should use a unique set of network ports to avoid interfering with other instances running on the same machine.
The port numbers selected must be from the reserved port number range and have not been registered by another application on this machine.

Please enter the port numbers.

Port Number for CVD : [8600]

Port Number for EvMgrC: [8602]
18. If this computer and the CommServe is separated by a firewall, type Yes and then press Enter to continue.

For firewall options and configuration instructions, see Firewall Configuration and continue with the installation.

If you do not wish to configure the firewall services, type No and then press Enter to continue.

 Is there a firewall between this client and the CommServe? [no]
19. Type the name of the CommServe computer and press Enter to continue.

NOTES

  • Ensure that the CommServe is accessible before typing the name; otherwise the installation will fail.
  • If you enter a short name which resolves to the same IP address as the fully qualified CommServe name, you will be asked if you would prefer to use the fully qualified name.
 Please specify hostname of the CommServe below. Make sure the hostname is fully qualified, resolvable by the name services configured on this machine.

CommServe Host Name:
20. Enter the username and password information for an external domain user account or a CommCell user account. This authorizes the installation of an agent on the CommCell.

NOTES

  • This is only displayed when the Authentication for Agent feature is enabled in the CommCell Properties. Users must belong to a User Group with Agent Management capabilities to enable this feature. For more information, see Authentication for Agent Installs.

Click Enter to continue.

 Enter your CommCell user name and password:

User Name :

Password :

Press <ENTER> to continue ...

CDR Configuration
21. Specify whether the computer on which you are installing CDR will be a source, a destination, or both. Any machine participating in the CDR network, can be either the source, the destination or both.

More work has to be done when installing CDR on the source machines: we will have to configure a special file system driver and select a dedicated directory where we will keep the cache of the file system changes.

Please specify how Calypso CDR is going to be used on this machine. Whether it will be a:

1) Source Machine
2) Destination Machine
3) Both Source and Destination Machine

Your choice: [3]
22. Specify a path for the Replication Logs directory.

NOTES

  • There are several considerations for log file space and location; refer to Replication Logs when deciding on a suitable location for Replication Logs.
 Since this machine is going to be used as the Replication Source, Calypso CDR needs a dedicated directory where it will maintain the cache of file system changes. The amount of free space in that directory should be at least 2GB (you will be able to customize it later).

CDR Cache Directory:
23. Specify, in MB, how much log file space should be allocated. Please specify how much space Calypso CDR is allowed to use in /test/cache for the caching purposes. Note that Calypso will use up all of the allocated space fairly quickly. Please don't enter more than you can really spare.

You have 4398MB free in /test/cache.

CDR Cache Size, MB:
24. The install program now starts copying the software to the computer. The progress of the operation is displayed. If you are installing on a Linux computer and are prompted that the version of the kernel is not supported for the driver, boot one of the identified kernels and then press Enter. .....
.....
.....
.....

Successfully copied xx files

.....
.....
.....

Successfully installed CVGxCDR

Setup Complete
25. This prompt is displayed only when you are installing on HP-UX, Linux, or Solaris computers. Enter the number corresponding to the Exit option and then press Enter to continue.

The installation is now complete.

 

 Certain Calypso packages can be associated with a virtual IP, or in other words, installed on a "virtual machine" belonging to some cluster. At any given time the virtual machine's services and IP address are active on only one of the cluster's servers. The virtual machine can "fail-over" from one server to another, which includes stopping services and deactivating IP address on the first server and activating the IP address/services on the other server.

Currently you have Calypso installed on physical node stone.company.com.

Now you have a choice of either adding another package to the existing installation or configure Calypso on a virtual machine for use in a cluster.

1) Add another package to stone.company.com
2) Install Calypso on a virtual machine
3) Exit

Your choice: [1]
26. If this is the last package that you wish to install, enter the number corresponding to the Exit option and then press Enter to continue. Calypso now supports the concept of instances, each of which can be installed to a separate CommServe and be totally independent of others. Instances are not the same as the virtual machines on a cluster, in fact, you will be given a choice to configure one or more virtual machines later. Contrary to previous releases of Calypso (6.1 and older), all virtual machines installed on the same host now share the same set of binaries and services and one situation where it is useful is when you want to back up the same host to several CommServes.

You already have one instance configured.

1) Add agents to existing Instance001 going to CS mycompany.company.com

2) Create a new instance of Calypso

3) Exit this menu

Post-Install Considerations

General

  • Review Install Considerations after installing the software.

  • Install post-release updates or Service Packs that may have been released after the release of the software. When you are installing a Service Pack, ensure that it is the same version as the one installed in the CommServe Server. Alternatively, you can enable Automatic Updates for quick and easy installation of updates in the CommCell component.

  • On the destination computer, data can be replicated to a non-global zone through a exporting device from the global zone. See Data Replication on Non-global Zones for more information.