Click on a link below to go to a specific section of the software installation:
Overview |
||
The following procedure describes the steps
involved in installing the Exchange Agents on 32-bit off-host proxy
computer. Install the Exchange Agents on an off-host proxy computer in the following circumstances:
To install Exchange Agents:
Off-host Proxy RequirementsIf you are installing the Exchange Agents on a 32-bit off-host proxy client (i.e., a computer other than the Exchange Server), perform the following pre-requisite task before installing these agents:
|
||
Install Requirements |
||
Verify that the computer in which you wish to install the software satisfies the minimum requirements specified in
System Requirements -
Microsoft Exchange Server iDataAgents
and System Requirements
- Microsoft Windows File System iDataAgent. The computer on which these agents will be installed
is referred to as the Client computer in this install procedure. Review the following Install Requirements before installing the software: General
Firewall
Agent SpecificTo Set Permissions for the Mail-Enabled User:
Now the MailboxAdmin user will be allowed full access to all mailboxes on servers in the domain. |
||
Before You Begin |
||
|
Install Procedure |
||
Getting Started |
||
1. |
Place the software
installation disc for the Windows platform into the disc drive. After a few seconds, the installation program is launched. If the installation program does not launch automatically:
|
|
2. | In this screen, you choose the language you want to use during installation. Click the down arrow, select the desired language from the pull-down list, and click Next to continue. | |
3. |
Select the option to install software on this computer. NOTES
|
|
4. |
Read the Welcome screen.
Click Next to continue, if no other applications are running. |
|
5. |
Read the virus scanning software warning.
Click OK to continue, if virus scanning software is disabled. |
|
6. |
Read the license agreement, then select I accept the terms
in the license agreement. Click Next to continue. |
|
7. | Select Create a new instance option to install the
Exchange Agents on separate instance for the purpose of different
Exchange Servers. NOTES
|
|
Select Components for Installation |
8. |
Select the component(s) to install. NOTES
Click Next to continue. To install the Exchange iDataAgents expand the Client Modules folder, the iDataAgents folder, and the Exchange iDataAgents folder then select one or more of the following (as appropriate to your application version):
When you select the Exchange Agents for install, the appropriate Windows File System iDataAgent is automatically selected for install. To install the Exchange Mailbox Archiver Agent, expand the Client Modules folder, the DataArchiver Agents folder, and then select from the following:
|
|||
9. |
Click Yes to set up the required privileges for the local administrators group.
NOTES
|
|||
The install program checks
your Windows user account for the following necessary operating system
rights:
|
||||
10. |
Specify the location where you want to install the software. NOTES
Click Browse to change directories. Click Next to continue. |
|||
Firewall Configuration |
||||
11. |
Select from the following:
NOTES
|
|||
12. |
Click the Specify list of machine across the firewall option and then
specify the list of hosts separated from this computer by a firewall. Make sure
you correctly describe whether the firewall allows two-way communication (but on
a limited range of ports), or one-way communication (with either only remote
host being able to make connections to this computer, or vice versa).
For all one-way firewalls allowing incoming connections and those one-way firewalls allowing outgoing connections without additional port filtering, skip this step. Click Next to continue. NOTES
|
|||
13. |
Click the Specify list of restricted open ports option and then
specify the port range. Add the starting and ending port range and then click
Add to place it in the Open Port List. Repeat as needed.
If firewall separating this computer from others allows incoming connections, but these connections can be made only on a limited set of ports, then configure the appropriate port range here. For all other scenarios, skip this step. Note that if you do not specify hostname(s) as well as port number(s), then the firewall services will not be configured. NOTES
Click Next to continue. |
|||
14. |
If desired, modify the Keep Alive interval.
Click Next to continue. |
|||
15. |
Optionally, select Advanced Firewall Configuration and specify a local
host name interface to use for outgoing tunnel connections through
the firewall. Otherwise, the interface and port is automatically selected for
you by the OS. Click Next to continue. |
|||
16. |
If desired, modify the Tunnel Initialization interval.
Click Next to continue. |
|||
Configuration of Other Installation Options |
||||
17. |
Enter the fully qualified domain name of the CommServe computer. (TCP/IP network
name. e.g., computer.company.com)
NOTES
Click Next to continue. |
|||
18. |
Enter the username and password information for an external
domain user account or a CommCell user account. This authorizes the installation
of an agent on the CommCell.
NOTES
Click Next to continue. |
|||
19. |
Enter the following:
NOTES
Click Next to continue. |
|||
20. |
Specify the location of the client's job results directory. NOTES
Click Browse to change directory. Click Next to continue. |
|||
Storage Policy Selection |
||||
21. |
Select the storage policy through which you want to back up/archive the
indicated component (subclient, instance, etc.)
NOTES
Click Next to continue. |
|||
Client Group Selection |
||||
22. |
Select a Client Group from the list. Click Next to continue. NOTES
|
|||
Configure Exchange Agents Specific Information |
||||
23. |
If you are installing the Exchange Agents then continue on with this
step, otherwise skip
to Verify Summary of
Install Options. Enter the following Exchange Administrator information then click Next to continue: Account Name - Domain user account created with the proper permissions. Do not include the domain name here. Account Password - The password assigned to the domain user. Mailbox Name for this Account - Mailbox associated with the user above. Profile Name - Created during agent install. This profile is associated with the domain user's mailbox. Exchange Server Name - Name of the Exchange Server that the agent will communicate with for data protection and recovery operations. Domain - The Windows domain that the Exchange Server resides in. The installation detects and enters a domain name. If necessary, this field can be modified. NOTES
See the Exchange Agents section in User Accounts and Passwords for more information. |
|||
Download and Install Latest Packs |
||||
24. |
Select Download Pack(s) and Install to download and install the latest service packs and post packs from the software provider. NOTES
Click Next to continue. |
|||
Verify Summary of Install Options |
||||
25. |
Verify the summary of selected options.
NOTES
Click Next to continue or Back to change any of the options. The install program now starts copying the software to the computer. This step may take several minutes to complete. |
|||
26. |
The System Reboot message may be displayed. If so, select one of the following:
|
|||
Schedule Automatic Update |
||||
27. |
If necessary, select this option to schedule an automatic installation of software
updates.
NOTES
Click Next to continue. |
|||
Setup Complete |
||||
28. |
Click Next to continue.
NOTES
|
|||
29. |
Click Yes to remove the privileges that were assigned earlier by the
install program. If you do not wish to remove them, click No.
NOTES
|
|||
30. |
Setup displays the successfully installed components.
NOTES
Click Finish to close the install program. The installation is now complete. |
|||
Post-Install Considerations |
||||
General
The software provides many more features that you will find useful. See the Index for a complete list of supported features. Agent SpecificMicrosoft Windows Server 2008 and Microsoft Windows Server 2008 R2 requires "csvde.exe" feature to be installed on the server to query Active Directory for mailbox information
1. Open Server Manager 2. Go to Features->Add Feature 3. Remote Server Administration Tools 4. Role Administration Tools 5. Select "Active Directory Lightweight Directory Service Tools" Disaster Recovery Considerations
|