VaultTracker Feature - How To

Create the list of media that must be tracked. This can be done in one of the following ways:
- Create a Tracking Policy as described in Create a Tracking Policy.
- Specify that media associated with a backup job must be exported and tracked as described in Export Media After a Date Protection Operation (VaultTracker Enterprise Feature only), Export Media After An Auxiliary Copy Operation (VaultTracker Enterprise Feature only), and Export Media from a List using VaultTracker.
If you have created a Tracking Policy, you must run or schedule the policy, as described in Run a Tracking Policy and Schedule a Tracking Policy.
If necessary, you can you can view the media associated with a Tracking Policy as described in View Media Associated with a Tracking Policy.
Once the media movement is initiated, you must monitor and record the status of the media, as described in Monitor and Record the Status of a Media.
Once the media movement is completed, you can view the history information for the media, as described in View Tracking History.

Create a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To create a Tracking Policy:

From the CommCell Browser, right-click the VaultTracker Policies icon under the Policies node, and then click New Tracking Policy.
The VaultTracker Policy wizard guides you through the process of creating a new Tracking Policy.

A regular Tracking policy can be created to export media based on the selected criteria.
A due back Tracking policy can be created to track the movement of spare media, residing outside the library.
Once created the Tracking Policy must be run or scheduled, as described in Run a Tracking Policy and Schedule a Tracking Policy.

Clone a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To clone a tracking policy:

From the CommCell Browser, click the VaultTracker Policies icon under the Policies node.
All the available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the policy that you wish to clone and then click Clone.
Type the name of the new policy in the Enter Name box of the Clone VaultTracker Policy dialog box. Click OK. The cloned Tracking Policy is displayed in the VaultTracker Policies level of the CommCell Browser.
Right-click the Tracking policy, and then click Properties. The Tracking Policy Details dialog box is displayed.
From the General tab, click the Enable check box. Click OK. The Tracking policy is now enabled and ready for use.

You must enable a cloned Tracking policy after it is created.
It is recommended that some of the options of the cloned Tracking policy is changed to avoid an exact duplication of the policy.

Modify a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To modify a tracking policy:

From the CommCell Browser, right-click the VaultTracker Policies icon under the Policies node.
All available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the policy that you wish to modify and then click Properties.
Make the necessary changes in the Tracking Policy Details dialog box and then click OK to save the information.

Delete a Tracking Policy

Before You Begin

Ensure that no pending actions are in progress for the tracking policy you wish to delete.

Required Capability: See Capabilities and Permitted Actions

To delete a tracking policy:

From the CommCell Browser, right-click the VaultTracker Policies icon under the Policies node.
All the available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the policy that you wish to delete and then click Delete.

View Media Associated with a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To view the media associated with a Tracking Policy:

From the CommCell Browser, click the VaultTracker Policies icon under the Policies node.
All the available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the Tracking Policy that you wish to view the associated media and click View Media.
The View Media dialog box, displays a list of media that satisfies the criteria defined in the Tracking Policy.

Run a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To run a Tracking Policy:

From the CommCell Browser, click the VaultTracker Policies icon under the Policies node.
All the available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the policy that you wish to run and then click Run.

When a Tracking Policy is initiated, the following are displayed in the CommCell Console:

An Event Message is generated to indicate that the Tracking Policy has been successfully initiated.
If the auto-acknowledge option is enabled in the Tracking Policy, the system will automatically acknowledge all pending actions associated with the media movement if both source and destination is a location. If the source is a library, the pending actions will be automatically acknowledged when the media is removed from the library.
For jobs that require to be manually acknowledged, the Pending Actions are displayed on the right pane of the CommCell Browser, when you click the Action icon under VaultTracker.

You must record the status of the media as it goes through the various stages, as described in Monitor and Record the Status of a Media.

Schedule a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To schedule a Tracking Policy:

From the CommCell Browser, click the VaultTracker Policies icon under the Policies node.
All the available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the Tracking Policy that you wish to schedule and click Create Schedule.
Create the necessary schedules for the Tracking Policy, from the Schedule Details tab.
Click OK to save the schedule.

Schedules for Tracking Policies honor holidays on the CommServe level.
When the schedule for the Tracking Policy is initiated, the following are displayed in the CommCell Console:
An Event Message is generated to indicate whether the Tracking Policy has been successfully initiated.
If the auto-acknowledge option is enabled in the Tracking Policy, the system will automatically acknowledge all pending actions associated with the media movement if both source and destination is a location. If the source is a library, the pending actions will be automatically acknowledged when the media is removed from the library.
For jobs that require to be manually acknowledged, the Pending Actions are displayed on the right pane of the CommCell Browser, when you click the Action icon under VaultTracker.
Options to view, modify, delete or disable schedules are also available. See the following topics for more information:

Export Media using the Export Media Wizard

Required Capability: Library Management

To export media from a library using the Export Media Wizard:

From the CommCell Browser, right-click the library from which you want to export media, and then click Export Media.
OR

The Export Media Wizard is displayed.
From the Export Media window in the Export Media Wizard, choose whether or not to use VaultTracker to export media.
- If you choose to export media using VaultTracker, the Export Media Wizard guides you through the process of creating tracking policies, choosing media movement criteria, selecting destination and tracking options, etc.
- If you choose not to export media using VaultTracker, the Export Media Wizard guides you through the process of exporting specific media using the Export Media List.

You can also access the Export Media Wizard by right-clicking the media you wish to export in the Media in Library node and selecting Export Media. The Export Media Wizard is then displayed.

Export Media From a List using VaultTracker

Required Capability: See Capabilities and Permitted Actions

To export media from a list using VaultTracker:

Initiate an Export Media operation as described in Exporting Media From a List.

An export media operation can be run immediately or scheduled using the scheduling options.
From the Export Media List dialog box, click Advanced.
From the Advanced Options dialog box, click the Use VaultTracker for export option.
Click the Use Virtual Mail Slots option to automatically move the media to a virtual mail slot in the library. Virtual mail slots are defined in the Library Properties (Media) tab.
Click the Auto-acknowledge option if you want the system to automatically acknowledge all Pending movement actions.
Select a Container if the media is added to a Container.
Click the Track Transit option and select the transit location from the list, to track the transit information. Transit locations can be entered using the Export Location Details dialog box.
Click OK to save the information.

If the auto-acknowledge option is enabled, the system will automatically acknowledge all pending actions associated with the media movement if both source and destination is a location. If the source is a library, the pending actions will be automatically acknowledged when the media is removed from the library.
If the auto-acknowledge option is not enabled, the Pending Actions are displayed on the right pane of the CommCell Browser, when you click the Action icon under VaultTracker.

You must record the status of the media as it goes through the various stages, as described in Monitor and Record the Status of a Media.

Set Automatic Tracking in a Tracking Policy

Required Capability: See Capabilities and Permitted Actions

To Set Automatic Tracking in a Tracking Policy:

From the CommCell Browser, right-click the VaultTracker Policies icon under the Policies node.
All available Tracking Policies are displayed in the right pane of the CommCell Browser.
Right-click the policy that you wish to modify and then click Properties.
From the General tab of the Tracking Policy Details dialog box click the Auto acknowledge option.
Click OK to save the information.

You can also enable the auto-acknowledge option for export media operations. See Initiate Media Movement After An Export Media Operation for step-by-step instructions.

Monitor and Record the Status of a Media

Required Capability: See Capabilities and Permitted Actions

To monitor or record the status of a media:

From the CommCell Browser, click the Actions icon, under the VaultTracker icon.
All the VaultTracker jobs with a pending action is displayed in the right-pane of the CommCell Browser.

Right click the action for which you wish to record the status and then click the appropriate movement action.

If you wish to record the status for the individual media in the action, right-click the action and then click Details.

From the Media Action Details dialog box, right-click the media for which you wish to record the status, and then click the appropriate movement action.

Choose from the following options:

Status	Description
Reached Destination	Use this option to indicate that the media has reached its destination. Once the media reaches the destination, the history information for the media can be viewed in the Tracking History window.
Picked up	Use this option to indicate that the media has been picked up. This action is applicable only for media movement between two locations.
Return to Source	Use this option to return a media to its previous location.. This action is applicable only for media movement between two locations.
Abort	Use this option to abort the media movement operation at its current stage. This information will be added in the history.

Available status:

When the media is at source, the following status can be recorded:
If the current location of the media is inside the library, status cannot be recorded.

If current location of the media is outside the library, the following status can be recorded: Picked Up, Reached Destination
When the media is in the virtual mail slot, status cannot be recorded.
When the media is in transit, the following status can be recorded:
If the destination is an export location, the Reached Destination status can be recorded.

When the destination is a library, status cannot be recorded.
If the source and destination are an export location, the Return to Source and Reached Destination status can be recorded.

The status options available for an action (as opposed to the status options available for a media in the Media Action Details dialog box) is the combination of all available commands for all the media associated with the action.

View the Tracking History

Required Capability: See Capabilities and Permitted Actions

To view the tracking history:

From the CommCell Browser, right-click the Actions icon under VaultTracker, and then click Tracking History.
Select the necessary filter criteria from the Media Movement Filter Criteria dialog box.
The Tracking History window displays the history information associated with media movement.
If necessary, you can roll back or delete an action as described in Roll Back an Action in the Tracking History and Delete an Action in the Tracking History.

VaultTracker history information is automatically pruned by VaultTracker after 90 days.

Delete Action in the Tracking History

Required Capability: See Capabilities and Permitted Actions

To delete an action in the tracking history:

From the CommCell Browser, right-click the Actions icon under the VaultTracker, and then click Tracking History.
The Tracking History window displays the history information associated with media movement.
Right-click the action you wish to delete and then click Delete.
The VaultTracker action is deleted from the history.

Roll Back an Action in the Tracking History

Required Capability: See Capabilities and Permitted Actions

To delete an action in the tracking history:

From the CommCell Browser, right-click the Actions icon under the VaultTracker, and then click Tracking History.
The Tracking History window displays the history information associated with media movement.
Right-click the action you wish to roll back and then click Roll Back.
The VaultTracker action is rolled back from the history.

Roll back option will not be available in the following situations:

When the media movement history has a library as the source or destination location.
When the media movement history was a failure.

Add/Modify a Location

Required Capability: See Capabilities and Permitted Actions

To add or modify a location:

From the CommCell Browser, right-click the Locations icon under the Storage Resources level, and then click New Location.
From the Export Location Details dialog box, enter the following:
The name of the location.

Select whether the location is Stationary or Transit location.

Provide a brief description (optional) for the location.
Click OK.
The new location is added.

Locations can also be added by typing a location name in the VaultTracker operations. For example, Tracking Policy, Export Media operation, etc.

Delete a Location

Before You Begin

Ensure that the export location you wish to delete is not associated with a Tracking Policy or pending action. Also ensure that no media currently resides in the location.

Required Capability: See Capabilities and Permitted Actions

To delete a location:

From the CommCell Browser, right-click the Locations icon under Storage Resources.
All the available location are displayed on the right pane.
Right-click the location and then click Delete.
Click Yes in the Confirm prompt.
The location is deleted.